kubota b2620

I am about to buy my first tractor. I am going to be mowing 4-5 acres with a 5' bush hog, and moving horse manure, sand etc. on a limited basis with a FEL. Do you think the Kubota B2620 can handle this adequately, or should I get the B3200? Thanks for any advice you can give me! Also-Kubota...

I need something to hold me over for a week until my mine shows up. Have any pics of your machine that you haven't posted? There aren't a whole lot of them on this site.

Here's an action shot of this morning's seat time. I cleared about 8" out last night and woke up to this. This snow is incredibly heavy and wet and I had to bring up the RPMs, engage the 4wd, and go slower than usual but got the job done.

Hi guys...I've been looking at the B2620 and B2320 both with FEL and 60" MMM. I am wondering what prices you all have been quoted for similar packages...as I think my local dealer is part %#. They quoted me today B2320 with a FEL and 60" MMM at $17000 + tax. From what I read it looks like a...

Anybody on here with a B2620 or similar size, use a 5ft rotary cutter? Is that too much weight for this tractor? Thanks for the input

Hello All, I have a fitment question... I own a Kubota B2620, loader, backhoe and 60"MMM. I have a chance to buy a used Kubota B2660 FM Snowblower ... can anyone tell me if this will fit on my tractor without major modifications. My salesman says no, but he is a big guy and hungry in...

Hello all, I have a B2620 and am looking at a Kubota B2660 Front Mount Snowblower.. Any monster problems associated with this marriage? I understand the MMM front brackets must be removed and 2 (two) holes drilled in the sub-frame. These are the only mods I've heard of .. anyone know of any...

I am really considering this. Both TLB with unloaded turfs. I love the looks of the B and the increased ground clearance. Here is what I use a tractor for on my 6 acres: 1. on grass for aeration, fert and lime. leaf removal after I get a vac. it seems like the 2 tractors weigh virtually the...

Has anyone installed Top and Tilt on their 3 pt hitch for a B2620? I have the hydraulics for the backhoe, does that help the setup or do I have to start fresh? From reading in other forums it looks like the TnT option is something I would want to have if I use a box blade. Thanks for any...

Thanks to reading all the posts here over the last couple of years I am realizing that I want a bigger tractor. I don't really know why except for tractors are kind of like TVs - why not have a bigger one? Anything new coming out on the B series? Would be a TLB no MMM- what other options...

B2620 with QA and 60 inch "light materials" bucket. Works good with snow and faster than the 50 inch bucket which has become my "dirt" bucket.

My B2620 HST pedal is sticking just a little but it's a big pain because when I get off the seat to change the angle on my rear blade the engine stalls because the relay switch has not tripped and the tractor thinks it is still going forward with no operator even though it is not. I have...

We have app. 1.5 acres of grass, a small vine yard with 100 plants which probably will be extended to 200, some 4 - 500 yards of food plot / brush. The ground is very heavy clay! I am planning on buying a tractor, FEL, RTR tiller, disc harrow, bottom plow, cultivator and maybe a back hoe...

I'm continuing with the research on these models... and wonder if anyone has mounted a Fisher or Curtis front blade to replace the bucket on a B2620 or B2920? I know it can be done with the B7800 and B3200, as well as the B2630 and B3030 models. I'm also aware that the quick-attach from a...

I know this is a Kubota pricing thread, but I wonder if people can tell me what they paid for various aftermarket rear blades from Land Pride, Woods, etc. Are you happy with the blade? Any limitations or design features that bug you - i.e. pin position's awkward, welds break, etc? Does your...

Finally got a tractor, after 3 plus years of reading, research and saving and divine intervention. 2009 Kubota 2620 with FEL, no attachments, friend upgraded to a larger tractor, buying his attachments. I have looked at all brands, models, CUT and SCUT, almost signed yesterday for a MF GC2400...

It's 15 degrees here today. I started my B2620 and it made a strange sound at first but started and ran normally. A few seconds later I see a small amount of antifreeze on the garage floor on both sides of the tractor. I killed the engine, popped the hood and noticed the source of the leak...

Got a couple of trees hung up back in the woods but was able to get to them and pull them down and out to my wood road. Sure makes me appreciate the small size of my tractor when trying to back between trees on a 12 degree slope. Whenever I want a larger tractor with a cab I try to remember...

Hi, Can some of you give me feedback on pricing for a snow blower (rear) for a B2620. Or recomendations on good models and if any other tractor mods might be necessary to run said eqipment. Thanks

Here's my homemade setup for getting some firewood off my lot. Length of chain bolted to the rear ballast carrier with skidding tongs that have a grab hook for the chain. Pick up the carrier and the log comes up. Hey, it's not professional but it works. The log on there is probably only a...

The 60 inch light materials bucket and QA is working out well for my b2620. Gives you more room for the light stuff. Hope it works good with snow. Now whee do I put my other bucket for the winter?:confused:

Decided to follow ChuckinNH's example and got the QA for my B2620. Also got the Light materials bucket for moving snow, mulch, woodchips, firewood etc. Will use my 50 inch bucket for the heavy stuff, gravel, rocks, dirt. Saving up for the forks next! Ready to speed up my snow removal and...

I'm a new owner and learning to use my FEL and BH. Yesterday I dug a huge hole to bury broken concrete. about an hour into it I stowed the BH and used the FEL to move the "dug" pile. On going back to the BH, the bucket retract and dipperstick extend movements produced loud moans. Everything was...

I know this question has come up a couple of times. I took my B2620 to the dealer the other day to let them do the 50hr service and go over all my concerns about the tractor. It fits perfectly on my 6 1/2' x 16' tandem axel utility trailer. It has two 3,500 lb axels with brakes on it and I...

Hi all. Thanks for the welcome messages on the new member page and for the tons of info that you all share. It was a great help in buying my first tractor. I was in love with the BX25 and it was the only one for me. Really it was what I could afford for my 2 acre yard, 2 acre pasture and 6 acres...

When I had my initial 50 hour service done on my b2620, the dealer mechanic said they recommend changing the engine oil and filter every 100 hrs and the other filters as well. The manual says my next engine oil and filter, HST filter change is at 200 hrs. Then at 400 hrs it gets everything...

I tried the 60" MMM on my new B2620 this weekend for the first time. To my dissapointment, the height adjustment knob is practically unusable. Regardless of the setting, when I lower the deck, the knob spins around and stops at 1. From looking at the other end of the knob shaft, it looks like a...

On the ROPS hinge on my B2620 there is a nut welded on. What's it for? Thanks, John

For those that might be interested, I did purchase the B3200 loader QA, and install it on my B2620 with no problems. I bought the Kubota forks, and everything fits, and functions fine. The forks seem to be a very good size for the tractor though having the BB on back besides the loaded tires is...

Well it doesn't take long to rack up the first 50 hours on a new tractor. Bought my B2620 last fall and needed to do the first 50 hour service this weekend. I called the dealer to ask how much they wanted to do the job and it was an unbelievable $350. Sounded pretty steep to me considering all...

Gentlemen, Just wanted to Thank all of you for the input when I was researching my BX buy. I took your comments , weighed my options and ended up with a B series instead. My 2620 showed up yesterday and was quickly put to work pulling up a bunch of old fenceposts. Also did some mowing...

First time on TBN, I just sold my BX2200 with FEL and mowing deck looking to get a little bit longer and wider tractor for stability and of course some more power wouldn't hurt either. I landed on these two models I loved my BX2200 the only things that is slowing me down on the new B2620 is that...

Hello All, This is my first post. I am trying to figure out what I should pay for a B2620 with a Loader. I searched other posts, but most posts have something else included (IE---Tiller, MMM etc) I got quoted 14,900 for a B2620 with LA364 loader. I want to take advantage of the 0%...

I have a neighbor who wants to buy my B7510 and has made me a very good offer. My neighbor just wants the tractor and FEL, and I would keep my 4ft bush hog, and 4ft box blade. But before I decide to sell it I wanted to know if the rear tire width for the B2620 or 2920 are too wide for my 4ft...

Has anyone bought a B2320? Anyone upgraded from a B7500 series to a B2320 or one of the others? I've been all over the place with what to buy, but have narrowed it down to a great deal on a B7500/B7510 or a new B2320. Any input on the 2320/2620/2920 with a loader? Is it stronger than the...

I feel like a kid at Christmas. I also owe this forum a big debt for being such a tremendous resource during the research phase. Thank you all. I ordered a B2620, TLB with backhoe thumb. Paying $20,900 and using the 0% 48 month plan. I have 2.5 acres, half wooded and a couple years of weekend...

I have a 2620 with a mmm. I want to use the rear PTO while the mower is attached. How do I lock the MMM in place so when I put the rear PTO up and down the mmm does not move? Can this be done and how? Thanks in advance

I am thinking about trading in my New Holland TC33DA on a Kubota B2620 or B2920. I just dont like the ergonomics of the NH (it feels like you are perched way up high). The B20 series is definately smaller and I am concerned about its capabilities. Will they pull a 5 foot disc harrow through...

Still in the Honeymoon phase... Popped 4 stumps out with the BH last week while the ground was thawed. Wow..I've waited 5 years to be able to do that. Whoever invented hydraulics should be sainted... I really appreciate everyone who posts their projects and ideas on this forum. Pic#1 below is...

Finally got the ok from the wife to get a real tractor. Torn between B2620 vs. the JD2320. Tractor will be primarily used for mowing about 3 acres of lawn. Looking at the 60" MMM. FEL work will consist of moving compost, gravel, wood. Need a rotary tiller for 60x60 garden. And finally a box...

Finally got the ok from the wife to get a real tractor. Torn between B2620 vs. the JD2320. Tractor will be primarily used for mowing about 3 acres of lawn. Looking at the 60" MMM. FEL work will consist of moving compost, gravel, wood. Need a rotary tiller for 60x60 garden. And finally a box...

Greetings all... I have lurked for a few months soaking up as much information as possible. I'm a satisfied owner of a 1982 B7100 who just pulled the trigger on a much anticipated B2620 with a BH65 and FEL... Dealer treated me very well (I think) giving me loaded R4's and a Woods toothbar plus...

On a B2620 when you pull the 3PH lever to the top (fast lift position) should it stay there or drop back to the centre position when fully lifted? Mine stays up unless I manually put it back to the centre postion. When fully up the loader can't get hydraulic power as it seems to be in constant...

I haven't seen any threads on the 2620 50 hr yet. I went to my dealer to get the filters and was going to change my Hyd fluid even though my book says to only change my filters and from reading other posts I thought I would put the SUDT in it. Well, I talked with the service manager and he...

Anyone tried a KK 6 Ft Tiller on the B 2620? Not sure what they weigh or how much HP they take to run well.. Friend has access to one. Just wondering if I can run it / lift it with the b2620.. Thanks. Tom...

I have read numerous times that some feel that the price increase isn't worth the extra 3 hp. My question is what can a 2920 do or use that the 2620 cannot? Can it pull a 5ft. RC instead of a 4ft? I believe they weigh the same and I'm sure that plays a role but as a new looker into the...

Does anyone know what the height, breakout force and weight that can be lifted by a B2620 FEL? Thanks.

After wanting a tractor for the last ten years or so, (ok I'll admit it, most of my life), I finally got my B2620 delivered yesterday. The dealer surprised me, I didn't expect it to get here until Monday. I wish I could have gotten the usual picture of it on the delivery trailer, but they had...

I was working in the woods tonight and grappled a log with the BH. This made the front end light enough that I had trouble steering. I noticed that I could use my heel on the hst fwd pedal and push the left wheel brake at the same time. So I unlocked the brake pedals and tried it. I was...

Hi, I am hoping some of you 2x20 owners can help me. I am failry new to tractors and new to my 2620. In greasing the loader in the manual it shows you the 10 grease points but where do you actually apply the grease in these fittings? My older New Holland had a different set up. The manual dosent...

Can anyone tell me what a B2620 and or B7800 with mid mount mower and front end loader would typically cost in the northern states. Thanks! Bill

Can anyone tell me what a B2620 and or B7800 with mid mount mower and front end loader would typically cost in the norhtern states. Thanks! Bill

When I first installed the lift arm on my B2320 for the mid mount mower, I was not satisfied with the fit of the lift arm on the lower link rod of the 3Pt mount (see LiftArm.jpg). The internal diameter of the bushing on the lift arm is 23.75MM and the transversal shaft is 22MM. You can actually...

Gents, I have been looking for a cab for my B2320 but I don't know if anyone makes one yet. I looked at the following site: Curtis - Tractor Cabs, Canopies, Sunshades, Equipment covers, Snow & Ice Control Equipment Sims Cab Depot - Kubota enclosures Do you have any other suggestions, I want to...

I've been hearing a lot of good things of the new B2620. As far as the loader goes, what's a maximum weight you can lift and carry safely with this tractor? Is 600 pound too much? The rear tires would be loaded and with adequate ballast on the 3 point hitch.

I can't decide. I only have 1.5 acres to mow, 1/4 mile gravel driveway to maintain, a little bit of snow in central Virginia. Also 5+ acres of woods to enter and fetch firewood. Also, a one-time job of filling in a very large swimming pool with surrounding earth and broken concrete and bricks...

Hi everyone. I was hoping for some advise on the topic. I am a fairly new tractor operator (1.5 yrs.) and new to the B2620 (11 hrs.) The manual really does not specify what is the correct RPM'S to run the machine at. I dont mow w/ it just using the FEL and doing some Box blading and york raking...

I used my backhoe for the 1st time Sunday. (received it Friday evening, had to mow on Sat). I can tell I will need some practice to be any good using it. Did remove 2 small stumps and a group of bushes. So I am happy. Not too happy with my usage of controls, but will get better with...

My b2620 just turned 50 hours. Was going to change the oil, had a very hard time getting to the drain plug with the crossmember of the FEL attached. Any special tricks to getting the drain plug out with the FEL crossmember attached? Since I was having the BH65 backhoe installed, I had the...

Just got back my b2620 with my new backhoe attached. Dealer said it would take about a hour each time to put the 3 point hitch back on. He said you need to take off your rear tires to pull the rod out that supports the check chains. How do you guys handle this? Looks like you would modify...

Could someone post a real nice pic of a B2620 or B2920 so I have something to look at until Friday? I want to set it as my background. Prefer one with the BH on. I checked the photo gallery and couldn't find anything.Thanks! CJBOTA

Hey guys, I need your honest opinion about the extra $$ for 3 hp on the b2920. I will be doing residential snow removal with a front mount 51" blower. I was looking at the b2620 but for $900 more I can get the extra 3hp... This question is for anybody that owns and uses a front mount blower...

Well the tractor was delivered today as scheduled. I spent about 3-4 hours in the seat in 100 degree weather and loved every minute of it. We got ours with the Land Pride 48" rotary cutter in matching Kubota orange. So far I'm very happy with my purchase of the 2620. Can't wait to play with it...

I am currious if anyone else has noticed that thier 2620 has a tendency to roll/creep downhill more than other HST's. I have noticed that I have to use the parking brake an awful lot even on a slight slope. It doesn't creep or roll on flat ground or when I stop. It just creeps/rolls down hill...

I went and test drove the kubota today. The salesman said he would give me the corporate discount. Does this sound like a good deal? New Kubota B2620 4wd HST with AG tires and loader 60" Land Pride tow behind rotary cutter $15,118 delivered I'm excited to finally get my first tractor!!

Today was the much anticipated day... the arrival of my B2620. I got the loader, 60" MMM and the ballast box. The snowblower is on order from Kubota. I ordered the bar/turf combo tires but they are not in yet so the dealer put turfs on and is going to swap next week. Compared to my old...

After years of reading these forums and struggling to get by with my 2WD G series, I finally bought a real tractor. I live on 10 acres of hilltop in central NY and the Winter here can be brutal with drifting snow filling in my 225' driveway. We have wind break trees planted, but they're not...

I'm at the final stages of deciding on a backhoe. Before spending the money, is the backhoe attachment worth it? For those of you that have b2620 and backhoe, was the money spent on it worth it? What can you do with this backhoe. My major concern is that it will look nice, but can it...

I'm looking at purchasing a backhoe attachment for my 2620. Any recommendations? How do you attach the hydraulics? Does that usually come with the attachment or should I start looking at getting the hydraulics issue done before proceeding any further with looking for a backhoe? I read...

Well, the waiting is over, and the B2620 arrived this afternoon. Here it is off the truck Let's see if this thing works? Yes, boys, and girls it does self feed! There is another brush pile over there, but it's tight.... one reason I didn't want anything much larger.... Yes, I think this is...

Has anyone replaced their 3ph turnbuckles with the telescopic stabilizers? What older model tele's will fit the B2920 series? I know a number of members did this to their B7510's and B7610's. Are the turnbuckle stabilizers the same on a B7610 and a B2920?

I'm looking to buy a 4WD tractor to landscape my house - just can't stomach paying $70-100K to a landscaper. Figure I can landscape for $20K in materials + the tractor cost over a year (and quite a bit of my time). I'm looking at the Kubota B2620 w/FEL and JD 2520 w/FEL. I would plan to rent...

I have had the loader off and on 5 times now. Today I tried to put the loader on and cannot get the Blue and Red from the loader to connect to the tractor no matter how much I push them. The ball bearings release fine. I can connect the white or yellow from the Loader to either the Blue...

Hi... I thought there were only a JD and a Kubota dealer within 50 miles of my new home... turns out there is a big Kioti dealer too. I was set on a Kubota B2620 HST with Landpride RC1548 rotary cutter and a R300 Rhino blade. This is what the local dealer offers me for a cash sale: Kubota...

Hi I have been lurking on this board for quite a while. After months of thinking about it, I am finally ready to buy a tractor (my first if you don't count a lawn tractor!), for my 9 acre spread in the Black Forest area of Colorado Springs. the lot is mostly flat with some gently rolling...

Have BX2000 with FEL and MMM . Have done a lot with that little buddy. Hate to part with it. It will be like losing an old friend. But, 4 years old and although nothing wrong with it, I was buying a new Hydro hose for it and saw the new 2x20's and so I traded. Hope I am as happy...

Hi there, Just put 20 hours on my new B2620 HST. However, I'm somewhat confused about how to operate the clutch. I thought that this was a two stage clutch. Push the pedal down half way, and you can change gear ranges, and press it all the way down and you can engage is disengage the PTO...

Well I went to my local Kubota dealer today to "look" at a tractor. I was actually decided on something like the B2320, but my dealer didn't have any. He did have two B2620's, with FEL sitting on the lot. After looking the unit over and talking with the dealer a bit he came out with the "do...

I live in Ontario Canada on 3 acres of woodland but my access lane way is 1/4mile long with VERY steep hills. I need a tractor with a front mounted snow blower to keep the road open in the winter. My local Kubota dealer is recommending the B2320, B2620 or B2920 model with snow chains for...

I'm down to these 2 models and was looking for opinions. Will be used for general maintenace ( clearing, moving fallen trees, stone work, cleaning up a 1500 ft driveway in both summer and winter although in winter i plow as well, 1/2 acre garden maintenance). Will not use for mowing as we have...

I've been having a problem more and more often with by B2620 shutting down once I leave the seat. I know, you are all thinking I left the PTO engaged, but that is not the case. My dealer gave me a long lecture on this before I even received the tractor, telling me NOT to call him if the tractor...

Here are some of my notes comparing the smaller Mahindras to the new Kubota B2620. I thought I had my mine made up and was leaning towards the Mahindra 2015/2710 combo until I talked to a Mahindra mechanic/dealer (same person) who explained why that combo was not the best setup. His comments...

B2620, 364 loader, 60" MMM, 50" Landpride Reverse tine tiller, loaded R4s - $17,232 Tractor loader and mower with loaded R4s - 15,800 Tiller - 1,432 This is not for me, but for my brother in law. I'm kind of helping him with the differences in tractor brands. He looked at Mahindra and Deere...

I'd like to get top-n-tilt for my B2620, but am unsure of the best approach. This is a topic I brought up before about 3 years ago when I was considering buying a B7610. I didn't purchase then, but recently purchased a B2620. I'm guessing things have probably changed somewhat on the TnT front...

I am about to buy a B2620. I plan on getting a fel, bb and cutter. What other add-on's should I ask the dealer to throw in? I have read about chain hooks on the fel, higher amp alternators, arm rests for seat, lights, etc. They will not throw in much, which should I push for?

The toplink that came with my B2620 is rather short (about 17" when not extended). I bought a medium sized replacedment at TSC which is 21". However, it won't attach to the tractor. The space between the toplink mounting holes on the tractor is too narrow. The toplink that came with my B2620 is...

I just attached a 7' KK landscape rake to my new B2620 and noticed a couple of problems. When I first hooked it up, the tube running from the 3PH triangle rake pivot point (not sure what this is called, by I'll call it the "top tube" for short), was not parallel to the ground when the rake was...

I thought since one of our members (bota2620) has already purchased one of these new models I would start a new thread. Folks can post here about their impressions of the new models as they start seeing them, buying them, or using them. Price information is always good, and pictures, especially...