kubota b2630

Hey guys, We have a Kubota B2630 that flipped in on the left side an hour ago. Got it uprighted in about 30 mins and it was hard to crank. We did get it to crank with a lot of white smoke from the exhaust. Let it run for a few mins and the smoke cleared and everything seems to be fine. We have...

I have a B2630, 2010 model. Would it be feasible to put a turbo on it for a little extra power. Some times I find the need for more power. I only own 15 acres so a bigger tractor is not really necessary.

Hello Folks Wonder if this BT751 will fit B2630. I know sub frame has to be purchased any way. The actual Backhoe recommended for my tractor is BH76, BH77 or BH75 The BT751 is from B21 model from early years 1997-2000. Anyone had any experience..?

Hello all New here with my B2630, well kept with only 720 hrs. Looking to put a back hoe on it and do some sewer lines & such. It seem like an awesome forum for answers & hope to have fun. :)

I have a rck30b deck From a b2630 that I am trying to sell does anyone know if it will fit a b2650?? I think the 2650 calls for rck30b-a.. whats the difference if any thanks

Hey All, First time poster. I am in need of a log splitter and the last thing I want to do is have another small engine to replace. Was thinking about adding remotes to the tractor and buying a hydraulic one. I've be reading and it appears as though I can expect a longer stroke time due to the...

I started up my B2630 yesterday no problem. I drove to mow my field. When driving there in the road I thought it seemed like it was not moving as fast as usual. When I got there I engaged the PTO for the mid mount mower. The engine slowed way down and then died. I could not get it started after...

I am thinking of adding a second rear hydraulic remote to my B3030. I would be ordering the Kubota-made remote kit and float detent valve which stacks onto the base remote valve. The Kubota wholegoods part numbers are B7307 for the second lever kit and B7305 for the second valve. My question...

My diff lock will not engage anymore and just clicks upon depressing the pedal. Anyone know cost of repair for this? Any chance I could do the repair?

Hi all, i currently own a Deere X495 with the 62C deck and would like to upgrade to something bigger, although 70% of the time will be mowing about 1.5 acres of lawn. I have my eyes set on two offers in my region (both used tractor dealers). One is a Deere 2520 with the 62D deck and 1750 hours...

I have a B2630 and I want to get a blade to help with snow removal next winter. What are my options? B2765A? I have the following attachments, Kubota LA364 Loader Kubota 60" Mid Mower I want something that has a power angle. Thanks for any advice.

So with all the snow here in New England I'm really depending on this tractor. Been great all winter but just ran into a problem today. Tractor starts up and idles fine however when I hit either the forward or reverse peddle it dies. I checked both air filters and they look clean. Actually...

Hi all, I'm looking for OPEN-STATION, Kubota B3030 OR a B2630. I need a foldable ROPS (or the open-station machine won't fit into some of my buildings, either) but I'd be willing to consider a non-folding ROPS, once I researched the costs/PITA involved in switching the ROPS out to to folding...

My B2630 tachometer bounces around like crazy when I start 'er up. I can get it to settle down if I grab the back of the instrument panel cover and pull it forward. But I don't know how to get this problem to go away. I've had the covers off trying to figure out what was causing the issue and I...

Hello, I am experiencing problems with the front end loader of the new to me b2630. The tractor is a 2012 with 225 hrs on it. The problem occurred over the last two days while the temperatures were below freezing. The tractor is equipped with the fender mounted joystick that his cable operated...

I own a B7800 that came with a RCK60-27B Mid Mount Mower. I have someone interested in buying the deck who owns a Kubota B2630. Is there a way to use this deck on the B2630?

Greetings all. Been a while since I posted - so I guess thats a good thing, at least from a mechanical standpoint...anyhow... I had a very strang problem today. The tractor stopped running, and acted like it was out of fuel. However the guage showed about a quarter tank. I noticed the sight...

Is the "5hp. per Mower-foot" Rule Inviolate? Want a 6' MMM on a B2630 vs. B3030 Hi all, I have read that one should have 5hp. for every foot of mower-span--but I'm not sure if this applies just to THP mowers, or to MMM, as well? I am a fan of the "old" (discontinued in, I believe, 2012)...

Hi guys. This is my first post here. I have lurked for a few years but have never had cause to post. My b2630 will not start. When I turn the key to the first position the safety switch clicks and only the crankcase light comes on but the battery light does not. In the second position the glow...

I have a B2630 with filled rear tires. I noticed the other day that one of the rear tires was leaking a small amount of liquid by the rim and the tire was low. I wonder if it is leaking because the tire got low and the bead broke. If so, can I just inflate with air or will that not work once the...

Hi all, I was trying to find the detailed specifications Kubota used to list on their site, for the recently-discontinued B2630. I went to "Prior Products" and they have B's goiing back to 1974, but no B2630, from the early 2000's, ending in, I believe, 2010. The page for "Prior Products" for...

Looking at purchasing an '05 B2630 with no FEL. and 250 hours for $9800. I will need a FEL. A new Kubota loader will run somewhere around $3500? Is there another brand loader that I should consider? Any drawbacks to buying a tractor without a loader and installing a new one? And, is an '05...

Looking for ideas, the left front wheel bearing (outer) on my b2630 has broken three times on now. The outer race on the bearing shatters, balls run to top, shaft drops and eats the seal, big oil mess too. This time it cracked the outer gear case cover..Never happens on right wheel. Not hard to...

Hello all! First of all, I would like to send a shout out to everyone for such a great forum that is full of information and is way beyond my expectations. I am new to the tractor world, so I have been perusing this site for weeks now in my search for a tractor. This is my first post. Just a...

I started purchasing the various materials needed for changing the transmission/hydraulic fluid in my tractor (2006 - B2630) and decided to use non Kubota oil and filters. I ended up purchasing udt compatible NAPA oil and two Napa filters. The person at NAPA that looked up what kind of filters...

Don't know if this is the correct place to list...... We have a B2630 tractor. When I turn the key it fires right up but dies as soon as I let go of the key. Tractor has fuel and fuel filter goods good also. I'm thinking there must be a fuel relay solenoid gizmo somewhere that may need...

We have a B2630 tractor. When I turn the key it fires right up. As soon as I let go of the key it dies. I've check fuel level - OK. Fuel filter looks good. I'm thinking there must be some fuel relay solenoid switch somewhere that may be bad. Can someone confirm and if yes where would it be...

I'm looking to fairly price my 2007 B2630HSD-F with 225 hours, FA403 FEL, 5' LandPride rotary cutter, & LandPride BB1560 5' box blade. Due to relocation I will not need this equipment any further. Each item is in very good condition and has been well maintained. Zip 62274. Thanks.

Do the owners of either wish they had bought the other? If I save some and buy the B2630 will I wish I had spent the extra for the B3030? I have 80 acres of recreational property that is hilly, rocky and mostly wooded, less than 5 acres that need brush hogged. There is 400ft of elevation...

Thanks to this forum and everyone who posts, I lurked, read and finally made a decision to purchase a Kubota B2630. I only live about an hour from the Barlow Equipment dealership so of course I contacted them and received a very fair price from Brady for the B2630 and a Landpride FDR 1660...

Can anyone comment on the maximu RPM they can attain with their B2630 ? I noticed that mine doesn't seem to go any higher than the rated PTO speed (2800), but I seem to remembe last year that it would go higher than that. Any comparison from other B2630 owners would be appreciated. Thanks !

Anyone ever see this happen. My neighbor has a B2630 that the front right hand wheel ( Axle ) broke off of yesterday when he was mowing grass. He was really lucky that the wheel broke off and went down his drive way crossed the road and traffic went on to my gravel pile and leaped 30ft in the...

Got a bid from local Kubota dealer for B2630/FEL/block heater/delivery/0% interest 60 mo... Note that the dealer said the 2630 had special dealer support of I think $1000...but the dealer did not tell me the 2630 and 3030 are either have been or are being discontinued...not too nice :) Quote...

Kubota B2630 Tried Cleaning fuel filter. Drained tank and put in fresh fuel with diesel conditioner. Changed air filter. It stalls mainly in low rpm while just starting to pressing the fwd or Rev pedal (hydrostatic drive). But it will do it while in full throttle and while the fwd/rev pedal...

I have a B2630 HST. This morning the starter wouldn't motor and thus, the tractor won't start. It did this once before and it was a fuse in the fuse box behind the dash. I checked these and replaced one. Still no starter on the key switch. I can jump it across the starter and engage it with...

Hello, As the title says... which is better for mowing a home yard... a BX or the B? I would be using it with a belly mower from Kubota. I like the fact the B machine is larger, etc. But I'm concerned about turning radius, etc. The machine would be used to mow close to a house just like a...

I have received what I believe is a good price quote on a new B2630. I asked for a package price including R4 tires (filled), loader with 60" bucket, rear work light, and BH77 backhoe. I fear I am forgetting something I may really find useful. The tractor will be used to move mulch and...

I have called Barlow's multiple times with promises of call backs. No call backs yet. Anyone know where else sells Gatormade trailers. I am thinking about a 16' trailer to haul my tractor.

Does anybody out there use the Pat's Easy Change on a B2630 or B3030? I'm talking about the regular version that pins through the eyes in the lift arms, not the new version which is a replacement for the factory lift arm slide-outs. I'm wondering if it fits these arms as they have only a...

Hi all, First, my apologies. a) This is a long post, but please stick with it, as the questions get shorter! LOL b) Also, I feel bad, coming hat-in-hand as I do, with another question, when I haven't responded to the many members who answered my previous post about BX's vs B's, 2-3 weeks...

Anyone know how much fluid the front axel on a B2630 holds ? I am gonna change it and re-fill with some 80W90 but can't find the capacity anywhere in the manual. :confused:

Well, its been a long summer - and my - not so new anymore - B2630 is ready for it's 50 hour service - although it may be slightly past that mark... :) Anyhow just looking for any tips anyone might have as I plan to do it myself. From what I can tell from the manual I will need to do the...

This is the seat on my 2007 B2630. Would someone who has been there tell me if this is the old or new seat? Messicks has side by side pictures. The old one has the arm rests but doesn't have the design in the seat. The new one has the design but no arm rests. I've got a hybrid it seems so can...

First off, I wanted to thank all the posters on this board, it really helps to get feedback from people that own the equipment. I think I've followed the same path as many on this board, looking at BX1860 first, then BX2360 and BX2660. I have not ruled these out, but I have 6.5 acres mostly...

Getting ready to do the 50 hour service on the ZD323 in the very near future and on the B2630 later this summer. I got a couple quotes for the materials and am confused by the difference in parts between them. I did not specify parts, just asked for a quote on the materials to do the 50 hour...

Well, nice day in VA today, got a lot of seat time. Mowing, rock and brush clearing, bush hogging. Even did a little unexpected rock splitting while bush hogging. :shocked::eek::confused2: Couple of dings now in my brand new blades. Anyhow, thought I'd snap a couple of backyard pics of the...

I am seriously thinking of trading in / selling the BX24 for either of these 2 models with a backhoe. I use the BX for caring for the 4.5 acre horse farm / house I have. I want something I can mow the lawn with but yet work clearing the land in the back. I have reached the end of the BX...

It's ready for delivery. Here's the pictures I promised. My seat still not in so I'm still waiting. Also took pictures of someones B3030 if they want me to post them.

I got a pleasant surprise yesterday My new B2630 was delivered instead of next Monday. What a sweet little machine. No loader didn't want one as I have an L4610 TLB. Attached are some pictures of the new tractor and a couple of shots of the pond.

Realistically, how big a tiller are people running on the B2630? Book says 50". I'm leaning toward a King Kutter. The 48" is offset to cover the tire track, but does anybody run the 60" model? I've never lacked for power with this tractor, but don't want to blow it now.

Hello all, Looking at trailers again. I was wondering what might be the smallest trailer that would be recommended to haul a B2630 (or any B series) with FEL and possibly a rear implement such as a blade. I understand I should definitely have a tandem axle with electric brakes. I have been...

Hi guys. Was wondering if anyone has a Brush Hog or Rotary Cutter for their B2630 or similar sized tractor. Anyhow, I'm looking for somthing to do some light bush hogging on mainly pasture land. Wondered what might be a good size, and brand name. I saw some at TSC in the $700 dollar range I...

Well after much researching / obsessing *Wife's quote* for the last two months. I finally pulled the trigger on my new B2630 TLB. I have a BX1500 now (heading down the road to my sisters house) Was planning on going to the B2620. But decided that the features of the B2630 were worth the money...

Anybody have an issue with the vent on the front axle leaking fluid? When I'm parked on a slope, either working with the backhoe or even with the machine just parked, the front axle fluid will leak out the vent pipe. It's not overfilled, either. Not a ton, but enough to make a mess. Ideas?

I seem to always have my top link at or near max length and since aquiring a box blade now want it even longer than it will go. My max length is approximately 22 inches center to center of pins. This brings me to two questions: 1) Where can I buy a longer top link that will fit? (Tractor...

Guys, I have been reading alot about tractors here. I am about to buy my first tractor. I just got a quote of $19,500 on a B2630, FEL, woods 4ft brush cutter. I am not sure about the price. MSRP for the tractor and FEL is $20,755 according to the kubota website. I am in Louisiana. Is this...

Hello all. As advertised, my B2630 w/ FEL, MMM and blade arrived this morning via Barlows delivery. Donald arrived right on time - 8 AM sharp and delivery went very smoothly. Enjoy the pics !! :D:D

I am thinking about upgrading from my BX24 to a B2630. One of the reasons is because I am not happy with the BH and I don't use it anyway, mostly because I am not happy with it anyway. Did I say I was not happy with the BH? One of the biggest reasons for the upgrade is that I am hoping that I...

Sat on my tractor and noticed a little play. This is not play in the steering, it the shaft feels wobbly. Can anyone suggest what might be loose, and how to access?. Thanks for looking.

My B2630 has is really hard to steer. Almost like no power steering. The tractor has 300 hours so I changed the filters and oil (hydraulic) but this has not help any. I read one post sayiing something about using the loadeer the loader to lift the front of the tractor off the ground and...

Greetings All, first time post. Thanks to everyone here for all the info I was able to gather from searching this forum, excellent resource. Bought my first tractor last Feb. B7100, real workhorse but became too small for some of my projects. Sold to upgrade, went to good home. Tough...

So I have decided to get chains for the rear of my B2630. I have R4 tires. I am looking for someone that has the equivalent of a B2630 that put chains on. Called the dealership and they said to watch for clearance issues. They could not say for sure if they would fit or not. Nay thoughts from...

So I have had my 2630 for 3 years. Absolutely love the tractor but I have 1 small problem with it. Everytime we get a snow of more than 6" it is about worthless. Latest snow storm dropped about 10" of wet snow on us. If it was not for my father in laws tractor there whould have not been much...

I did a search and found an old post about a step (kubota part #6A700-51350) to be added to the left side operators platform on a b2630 or b3030. Has anyone installed one of these? I'm looking for long term feedback - how have they held up and how has the platform held up? I'm concerned that...

When I start my tractor up (cold) I have no hydraulics I let it warm up about 5 min, then have some (little) use...If I try and drive it the pump screams and I don't have any steereing, forward or reverse, loader movement etc... After it gets good and warm everything seems fine..I haven't had...

my b2630 recently started making noise only in high range.The dealer said it is hydraulic noise. when i press down on peddle i hear a high pitch noise. After it warms up it stops. It never did it before.anybody hear the same noise?

B2630, FEL, Landpride 60" Rotary cutter, Landpride 58" reverse tiller, and the ZD 323 for cutting the grass. Thank you all that contribute your nuggets of wisdom to this forum. I believe it has helped me to select the right equipment for me...the first time. I would also like to thank Neil...

Built some guards for my hydraulic filters and thought somebody might wnat to see how I did them, so here you go. You can see by the old filter why I needed it. Little tip: if you want to change the filter without draining the oil I put a small vacuum cleaner on the fill port. Be careful as...

Hi everyone, in the spring i'll be in the market for my new Kubota tractor. I've narrowed it down to the b2920, or the b2630. The problem is i've been on this sight for weeks looking for threads about the 2630 but have'nt seen anything yet. I know everyone is going to tell me why not the b3030...

New to posting to this site, I've used it many times for information. Thank you all for that. I currently have a '98 JD 4100 with FEL and want to trade up to a larger tractor. I've narrowed the choice down to either the B2630 or B3200. We own 11 acres, mostly wooded, I'm always moving dirt, snow...

I was working with the backhoe yesterday, had the tractor positioned on a hill with the front end pointed downhill. I thought I had a leaky fitting, but closer inspection revealed the oil in the front axel was leaking out of the vent. Has anyone had this happen to them? Normal? I'm assuming...

I initially posted this on the Kubota Owning/Operating list. Thought maybe the Hydraulics list might tap more experience. My tractor is a Kubota B2630, loader LA403, total package has 130 hours, I bought it new about 2 years ago. Two weeks ago, while moving snow, I dumped a load in the ditch...

My tractor is a B2630, loader LA403, total package has 130 hours. Two weeks ago while moving snow, I dumped a load in the ditch and that was it. The bucket was in full dump and no curl function was there. Moving the lever into curl position produced no movement in the bucket. If I held the...

I traded my B7800 last year for a L3240HST. It now has 35 hours and I want to go back to a B which seems to fit my needs better. Messed up and emailed Brady yesterday at Barlows and told him of my desire to trade back to a B. He has priced the trade to the 3 I picked. A used B3030, used B2630...

This valve was used last summer after I installed the Top-N-Tilt 3 point hydraulic cylinders and recently replaced with a float detent (B7305) valve section. The B7304 double acting valve can be used singly (first position), in pairs (first and second positions) or in first position with the...

Has anyone with a B2630 or B3030 ever pulled the water drain on the transmission like it mentions in the owners manual? I did today just for the heck of it and nothing at all came out. Just wondering if anyone has actually gotten anything to come out of theirs?

Thanks bandit67 for your post on B3030 ROPS light project which after looking at you attachments leads to this new thread. First off I must preface all this with the fact that I have no experience with the use of standard rear blades esp. in snow (my box blade/scraper would only jam with...

I'm having trouble disengaging the diff. lock after using it. I've tried fwd and reverse, tried alternating right and left brakes, etc... When it finally comes out, it makes one horrible sound/feel. It's a real pop, and not at all smooth. What am I missing? Any tricks? When using it, I...

Anybody come up with a good way to add hydraulic oil to the B2630/3030? I had to top it off when new, I did my 50 hour service over the summer, and I've got to tell you - that is my only complaint with this tractor. What a pain in the neck! The fill is tucked so far underneath the rear of the...

I bought a 60" plow blade for an ATV. Got the blade mount really cheap (it was a leftover from a '90s model). I modified the mount and built an adapter for the 3pt. Total of about $400.00 and 6hrs fab and setup time. I have concrete drives and sidewalks. They have a lot of cracks and bumps. I...

I bought a 60" plow blade for an ATV. Got the blade mount really cheap (it was a leftover from a '90s model). I modified the mount and built an adapter for the 3pt. Total of about $400.00 and 6hrs fab and setup time. I have concrete drives and sidewalks. They have a lot of cracks and bumps. I...

Hello, Can anyone tell me if my B2630 has any pre-wired circuits that I could use to power a single HID work light (3.8 Amps) on the ROPS? If there is, is it switched w/ the key or is it always hot? Thanks for any help

After weeks of research and indecision, the B2630 will be in my garage to support the landscape project (and maybe more...). It came down to a local B7800 Kubota, Deere 2520, and Kubota B2630 500 miles away. I literally called 15 Kubota dealerships in 5 states and finally located a B2630...

I'm wanting to install a set of remotes on my B3030 for a TnT and possibly a 3rd 3PH-mounted implement. I've read lots of threads on installs using the Prince valves and cylinders from Surplus Center, but haven't read of anyone that has went the factory route. I've taked to my dealer about the...

THE DEALERS ARE TELLING ME THE 3030 IS A MUCH SMOOTHER RIDING TRACTOR BECAUSE OF THE FOUR CYLINDERS. COMPARED TO THE 2630 WHICH HAS 3 CYLINDERS. CAN A LARGER ENGINE RUN SMOOTHER? IS THE 3030 WORTH THE EXTRA $1300 - $1500 ?

Finally got a quote on 2 machines. B3030 $23,536 (not including tax) Ballast Box LA403, 60" bucket Quick Hitch BH75A, 12" bucket B2630, same stuff for $22,386 (not including tax) How do these look? Both appear to be about 15.2% off list, best I can tell. Thanks

I can purchase a B4672a in VGC for a good price. Will it work okay on my B2630? Does anyone know of any reason not to use the B4672a on the B2630?

New b2630 with loader and hoe. Got the thumb welded on. Made by Sundown. T-1 hardened steel. It is mechanical, with 2 positions in addition to the storage position. First of all, anyone with ANY question as to whether or not to get a thumb, GET IT!!! You will love it. If the backhoe...

I made up some more of these for sale. $15 plus $5 shipping. The picture installed is of the original one I made, the other picture is of the one I made up for sale. The original one was made of 11 guage the ones I made up for sale are 14 guage, still plenty heavy to stop ripping your filter...

Hello to all, I'm new to this forum. I have found a 2007 Kubota B2630 with 280 hours on it. It is equiped with a front end loader LA403, and a backhoe BH75, R4 tires. What would be the major things I should look more closely on the tractor before buying it ? Engine, oil, cylinders, hoses...

I have been searching old threads and believe I have found the answer but not sure. I want to do some plumbing. Somebody surely has gone through this. I know very little about hydraulics. What size quick connect couplings are on my FEL? What do you ask for? model? series? 3/8" B-72 Series snap...

Bought my B2630 last summer w/o a backhoe, so I have no idea where/how hydraulic-powered rear implements are hooked up to the tractor hydraulics. Now I'm interested in buying a Shaver PD8 post driver w/ 3-point attachment. Would someone be kind enough to explain to me how this will get hooked up...

I have a B2630 Kubota and want to know if it will run a 60 inch KK tiller. I have a freind who has the tiller and said I can borrow it any time I want and was just wanting to know if the tractor could handle it. It would be used for a garden area that the ground has been worked for years. Just...

I am selling My B2630 LA 403 fel,rear tires filled,107 hrs for $14,100.00.Just curious if people think that at that price if it would sell reasonably fast.

I may go look at a used B2630 w/FEL tomorrow. The tractor is one year old, seller is asking $14,000. I plan to use for brush hogging aprox 5-10 acres and clearing another 5 acres of cedar trees apporx. 10 - 12 ft. tall. Eventually put in couple of acres of blueberries and/or grapes. The...

I am installing a snow blower chute rotater and it won't work on these ports, only turns one way, but will work on the other two. The blank (inner) ones are used for the blower lift cylinder (came that way from the dealer). The blower lift cylinder will work on the ones I show hooked up...

I am nearly ready to buy my tractor, have been looking and wishing now for three years, but still need a little advice (nobody had better give me that 'green, blue, orange are all equal bs; I've looked AND touched, and orange is the best ;) ). My area is blessed with an abundance of Kubota...

buying a 2630 with r4 and fel 14800 otd is this a good price? tractor doesnt have the folding rop

I guess i bought a 2630 for 14800 otd and it should be delivered monday. Is this a good price? R4 tires, fel, but dont have the folding rop.

Ordered the new style catcher for this machine (rck60-30b i believe), however the installation requires that the horizontal pin which connects the sway bars for the 3pt hitch be slid out and a new bracket bolted on... EACH TIME THE CATCHER IS INSTALLED! this is a tremendous efford as i also...

I received a call from my Kubota dealer yesterday and my new seat is in. I thought it was a little bit more expensive than what I had heard ($69.99 + tax). My question is has anyone tried the new seat and is it worth the money. I know there has been some post about the seat for the BX and the...

Looking at getting this unit with 72" mower, one dealer tells me he would not recommend a 72" MM on the 2630, the other does not see an issue and Kubota sells it as this setup, Does anyone have experience/input on this? Also historically has Kubota ever offer 0%/60 like New Holland does?

I have 5 acres of lawn to mow and another 8 to brush cut and also will do some light landscape work in the yard like moving gravel mulch etc, putting in flower beds. Also plan on using a box scraper to smooth out some soil now and then. Any suggestions on which unit? I have been told by king...

Putting together a 2630 or 3030, what is the general thought , is the factory loader a better option than a Woods or Koyker, how do they price compare. Financing aside of course

Can any speak to the ease of installation/removal of the mid mount mower on the Kubota vs New Holland assuming both have the loader installed. Trying to decide which tractor to buy since the MMM will most likely be off when doing loader work due to ground clearance.

Carver Equip is pleased to offer an improved, much more comfortable seat for BX, B2630 and B3030 tractors at a drastically reduced priced compared to retail. Orders must be placed now. Discounted price offer ends June 13, 2007. New seats will begin to ship after July 1, 2007. Email to me direct...

My son broke the left lens on my headlights and the dealer said you have to buy the whole assembly and it cost $154 Does anyone know where I can get just a lens? Thanks

My son broke the left headlight lens on my tractor, and when he called the dealer for a replacement lens they told him he had to buy the whole assembly. It costs $154 does anyone know where you can get just a lens? Thanks

Thought you guys might like these.:D

I was told by the manager of one of the dealer reps (Columbus office) that Kubota released a dealer bulletin yesterday with a replacement program for the B2630/B3030 tractor seats. Can someone reply with a bulletin number, or even better still a scanned image of the bulletin???

Just got my new B3030 tractor today with a new seat design from Kubota. I don't know if this is new only for my tractor, or if it is representative of what will be supplied on future B2630/3030 models. Anyway, here it is - sorry for giving you a link to see it, but I don't want to start an...

I'm considering upgrading my TC18 - shhhhhh don't tell my wife:rolleyes: I'm trying to minize my hit on depreciation by buying used... Just wondering what is new on the BXX30 vs. the BXX10 machines besides the more modern looks and new loader (which seems to have similar specs). I'm not...

I have been out working with my new B2630 cleaning up the yard and the exhaust smell is getting to me. I have been shoveling into the bucket with the tractor running. What do you guys suggest? What do the landscaping guys do? I thought about running a Y connector with a diverter to send it...

Dose anyone know what weight engine oil was put in a B2630 from the factory ? I bought my tractor back last april and it only has 18 hours on it but I want to change it anyway for this spring. My owners manual calls for SAE 10W-30 or 10W-40 or a straight 30 weight for temps over 77 degrees. I...

I was wondering if any one has been able to cross reference the engine oil filter (70000-74034) to another brand other than Kubota. I crossed the the rest of the filters with Wix #'s but this one won't cross.... Thanks

I upgraded my B2630 alternator thanks to the posts here. I would suggest if you are not mechanically savy don't attempt this! For anyone attempting this a couple of notes: 1. Calling what comes in the kits as directions would be an exaggeration, a parts list a better term. I was hoping for...

Just thought I would post my fuel filter guard I made. Might save somebody some time. I run my tractor in the woods and could see a stick punching the plastic bracket or bowl right off.

It's a B2630HSD, LA403 Ldr, turf tires, w/ folding ROPS and I couldn't have done it without TBN! Turf tires: Yes, the rears bulge in the middle; not flat like the turfs on my old B7500, but because of TBN I knew what to expect and ordered the 1 1/2" spacers. Plenty of room and a wider...

Hello everyone - new to the tractor world. I have never owned one before, but am in serious need. We have a little over 5 acres, relatively flat and will need to maintain by field mowing, cutting back blackberries, etc. Also, we have a small amount of landscaping that we would like to do -...

Has anyone made a modification to the useless glove box behind the seat of the b2630/3030 ? The plastic door has not latched since about week two of owning tractor. This is the only thing about the tractor that bothers me.

I have a new b 2630 with 58 hrs on it and I noticed the rear end getting hot.Also the rear pto chatters pretty bad. You can't leave your hand on the rear end it gets so hot. I noticed this before and after the 50 hr service. I called the dealer and he said they had no service bullitens on it and...

I just completed my 50 hour service. I spent a little extra on the Super UDT and I'm glad I did. When I shift between H/M/L it isn't finiky like before. I also changed the front axle case oil even though the manual says 300 hrs. The hydraulic oil looked dirty with many particles in the bottom of...

I finally did it and pulled the trigger. Joining the forum that is. I have spent about a month of reviewing this forum and I must say that your knowledge is truly amazing. About 3 weeks ago took delivery on a new B2630, 60" mmm and woods 6' rear blade. It is amazing how far Kubota has come in...

Recently while cleaning up some overgrown areas around a storage shed, I had some heavy gauge wire wrap around my drive shaft (actually it was a tomato cage - how it got in there is a true mystery). It took several hours of pulling and unraveling to get it out, but it is out. After removal of...

Was on the kubota site and noticed they had rebates for the 2630 and 3030. Rebate Page Click here

I'm trying to decide between the B2630 and the B3030. Question for those who secured the former- any regrets? Do you wish you purchased the 3030 instead? Any 3030 owners who wish they saved a grand or so by getting the 2630? Decisions, decisions. Mike

anyone with a b2630 with 72\"mmm i am interested in the 2630 with a 72"mmm but the dealer is telling me it is border line on power.Anyone with experience with 72"MMM please repley. MOwing approx. 6acres,

B2630 with 72\"mmm will a 2630 handle a 72" mmm please help

B2630 with 72\"mmm will a 2630 handle a 72" mmm? buying this weekend trying to decide on mower size please help.

New presentation, details, specs, photos on the new 2006 B2630, B7800, B3030, B3030 Cab Kubota units Link Enjoy and best wishes, Steve

Well I finally made the investment in a new B2630 with LA403 loader and BH75 backhoe. I would like to thank every one who unknowingly gave me information through these forums. I have learned a lot about tractors in the last few weeks from reading all the posts here. The tractor will be here next...

My b2630 struggled to lift this one.. pic1 pic2 pic3 pic4 pic5

I just found this website and it has been a big help. I currently own a BX2200 with a FEL and 60" MMM. I am looking to upgrade to either the L2800 HST or B2630. I have approximately 20 acres that are a combination of 3 acres of lawn and the rest fields. I have decided on a rear mount finish...

Hello, I'd like your advice on tractor selection. I am looking for a machine to finish mow 6 acres, and rough cut less than 3 acres - all of it is flat terrain in the midwest. It will need to till ~1/2 acre garden. FEL for general use. There are about 10 acres of woodlot but I have no need...

genbuy-ML-750461-ML- Multiple brand posts belong in the General Buying forum

This comming spring I in tend to purchase a compact tractor... I have around 4 acres of field/grass to cut.. plus I need to do some front end loading ... I NEED 4WD beacuse it gets pretty soggy in some areas... I have around 600 ft of creek that has misc. scrap trees that need to be pulled out...

When looking at these two in comparison, it comes down to a simple question of whether I want the B3030 or B2630. For a little extra pto HP (3.5) and gross HP (4) on 3030, significant engine displacement, and minor dimension specs, I guess it boils down extra $$. Attachments with purchase of...

I'm interested in hearing your opinions on one vs. the other. I'm completely new to tractors. Just bought 26 acres. 10 of it is forest and I plan to leave it that way. Of the 16 acres left, all is pasture. The land is flat. I plan to mow about 3 acres of the pasture regularly. The rest...

I'd like to know why the total pump output of a B2630 is different (higher) than a B3030? B2630: 9.8 gpm B3030: 9.1 gpm I don't understand, even a B2710 has more output (9.5 gpm). I asked my dealer, but he didn't know and he didn't seem to have the will to search and get an answer. I don't...

I almost signed on the dotted line line for a B3030, but backed off when I noticed how much the steering wheel (and deck) vibrated at all rpms. It's not nearly as smooth as the Case/NH , JD or MFs that I tried out. Was this machine a fluke or is this norm for the B series?

I am currently starting to play the pricing game on a new B2630 or B3030 with mower and backhoe. I was unofficially quoted $15,500 for the B2630 and $17,000 for the B3030 both with loader. The backhoe and finish mower were $6000 and $1800. Is this a good west coast price? I realize that these...

Hello, This is my first post and am looking for some advice. I am in the market for a compact tractor and have prices on the models listed in the subject. THe b3030 and jd4210 are within a few hundred dollars of each other. The b2630, which the dealer tells me is more comparable to the 4210...

Can someone tell me why I should by a JD 4115 instead of a Kubota B2630? Both dealers are quoting about 14% off list for the tractor + FEL, but the Kubota is about $2000 less than the JD. I've charted out the specs to make sure I'm not missing anything, and from what I can tell the Kubota comes...

Well I take delivery on a b2630 TLB on thursday. I hope my trusty b7500 finds a nice new home. I did a lot of research and was also considering the kioti ck 25 but couldnt find a place close by to check one out. My kubota dealer is right up the road from work I ended up getting the whole setup...

Can anyone tell me what the alternator amp rating is?

I just sold my Cub 7234 gear drive and am now ready to join the world of hydro drive. Unless something else really catches my eye, it looks like I'll order either a B2630 or a B3030. My old Cub had a 20hp PTO and the 2630 has a 19.5hp PTO. I would like to get a new light duty 60" rotary mower...

I’m stuck deciding between tractors, the BX 23 TLB with 60 in MMM and the B2630 LA403/BH75 with a 60in MMM. We have just under six acres half of which I mow, the former owner was a golfer, the other half of the property is wooded. The wooded half has a 100-foot deep gully that occupies about...

in my long on going quest for a machine, i think i'm finally getting closer. i was looking at the 3 above mentioned models. seems like the 3030 and the 7800 are pretty much the same tractor except the 3030 has the more delux features. i was able to try out the 7800 in the dealers lot it felt...

I had found a web site that listed some steet prices for most Kubota models and I can't seem to find it again. Does anyone know of recent selling prices on the B7800 and B2630 in the NY,NJ,CT area?

I was down at a Kubota dealer today and notice a B2630 with turfs. The rear tires were about a half inch from the inside wheel well. The tires appear to bowl out more than some of the other tires on a B7800 for example. Has anyone else noticed this? Is there a solution? Are spacers a...

Anybody heard about pricing on new B2630/3030\'s? Wondering if anybody has heard what the pricing on the new B series tractors is going to be like? Maybe I am getting cabin fever but I keep having this recurring vision of trading in my BX23 on a new B3030 with FEL and backhoe and I am looking...

I visited my friendly Kubota dealer today and he gave me the brochure for new B Series Kubotas. One thing I didn't know is that the B3030 is available with a factory cab. The first in it's size class, and the new BH75 Backhoe, which is a subframe mount. I can't tell if the backhoe runs off the...