kubota b7610

A few pics of the first outing on the new 7610. Had to dig a hole for transplanting a fig tree. Had to dig out the tree by hand at the old house. It was so nice to be able to move it by chaining it to the front bucket instead of trying to drag it. It took us 20 min to drag it 30 ft downhill...

just in case anybody has a hard "creaking" noise coming from the rear wheels of their B7610 or similar machine w/the hex shaped rear axles that you can widen the wheel spacing on,before you take it back to the dealer($$$) pull the wheels and flanges off,and put some anti-seize on the axle and...

Does anyone know if the optional work light kit from Kubota come with a relay in the harness? I'm hooking up a set of Hella fog lights to my ROPS and hooking into the factory connection under the seat and wondered if I need to add a relay.

Hi. I'm looking for a wiring diagram for the dash on a B7610. I am currently wiring two switches that are illuminated but I would like to tap into the dash light switch so the switches are illuminated when the dash lights up. If a wiring diagram isn't available then does anyone know what wire...

My new B7610 just arrived yesterday. I have been looking at various brand names for quite some time including Deere, NH, and others. I paid $11k for tractor, 5ft finish cut mower and 5ft blade.

I am waiting on my Kubota B7610. I am needing a rear blade and I have decided on the MidWest brand, but what size? I initially decided on the 5' but should I go 6' and can the B7610 handle a 6' rear blade? thanks, Jay

Hi, I recently relocated back home to Minnesota and now need to install the block heater in my Bota. Anybody know the P/N for the 7610? Thanks. Curtis

I am deciding between a B7610 w302/352 or B7800 w/402 loader. I live in Northern Ontario Canada with 20 acres of hilly maple woods with rocky soil and some big rocks in spots. I was just outside checking out some of the rocks that I would like to move about.There are about 15 rocks a bit...

Hello To All, Since I'm not the original owner of my B7610 and would have missed any notification is there any other place to check for any possible recalls other than a dealer? I don't know how common recalls for tractors are but as a former car mechanic I dealt with them on a frequent basis...

My deal on the BX23 died as the dealer delivered it without the snowblower, no manuals, no demo and the unit was not in good shape maintenance wise....so, I refused delivery. I am taking some of the advice from the tractor vets here and looking for a 7500/7610 type unit with a Woods BH6000...

Okay, I've narrowed it down to either the b7610 w/352 ldr at $14900 or the b7800 w/402 ldr for $16950. These prices seem awfully high considering someone was just quoted $16??? for a b3030 w/403 ldr. Is it possible to buy out of state and have it shipped. Shipping has to cost a lot.

Here's one that maybe only a dealer can answer. In pricing some turf tires for my 2004 B7610 I was told that I would also need to buy new rims as the turf tires are larger than the R4's that came with the tractor. Can anyone verify this for me? Hagman

I'm considering my 1st tractor and cant decide what to buy. I have a couple acres of wooded hillside and 6 acres of relatively flat wooded/grass mix that I want to do general landscaping/cleanup/path building work on. I like the size/stability of the 7610 but worry about the loader lift...

Please see the attached B7100. I bought it new more than 20 years ago with a gear transmission, 4 wheel drive, Rear mount Woods mower and a rear mount Woods blade. I have 4000 hrs on it and had only one problem with the shaft that connects to the front axel about 10 years ago. I'm going to have...

I recently purchased a set of the Gator mulch blades and have to say it made a huge improvement over the stock Kubota blades. I asked my dealer if Kubota made a high lift blade for my 54" deck (RCK 54-24B) and he said no. I am considering blocking off the discharge side of the mower to see if...

Went to the local dealer and got pricing on both units with a FEL and 54" mower. The difference is about 1,555. I noticed that the B w/FEL will not lift as much as the BX. Is this due to CoG. The BX is at 6.5 and B at 12 inches ground clearance. Can't decide which one to get. Have 5.5 acres...

Just came from the dealer and was given pricing on both above with FEL which came to 1,555.00. So what is a better buy. Looking at a total of 5.5 Ac. with at least 3.5 to keep and maintain. Need the FEL surprised to see that the Bx can lift more than the B, is it because of the CG. or what...

Hi, I am a newbie to the forum and the idea of purchasing a tractor. First, let me say I have learned a lot lurking on this forum for the last several weeks, but I know I still have a lot to learn. I have about 6.5 acres of land. The land is probably about 1.5 acres lawn, 3 acres field and 2...

I'm planning to buy a B7610 and I want to get a backhoe. Probably a Woods. I see from searching this forum that some have the BH6500. Is this the biggest one you can put on the 7610? Would the Groundbreaker-x work (BH70-X)? Also, would you get the pump or use the tractor hydraulics? Thanks!

This year, i've noticed that when I push the FEL lever forward there is a "dead" spot. When I first start pushing the lever forward, the bucket drops slowly. I push a bit harder and the bucket stops! Push a bit harder and it starts to drop again. I've gotten used to it but figured that I...

Got another question on my new B7610. I hope I don't wear out my welcome here. Hopefully I will be able to assist other new owners in the future. I do appreciate all the helpful comments and suggestions already sent my way. Anyway, the loader joystick, which stays mounted on the tractor, has...

Hello Fellow Kubota owners, After buying a used B7610 with the 54" mmm I am now trying to figure out how to adjust the mower drck properly. It was never done by the previous owner and when raising the deck up the front wheels still make contact with the ground. I know that the mowing heigth is...

After spending the last couple of months looking into upgrading from a BX1800 to a B7610, and asking a couple of question on this forum, I made the leap and bought a B7610. It was delivered yesterday with a FEL and a 60" RFM. So far I like it a lot and it is much more tractor than the BX. But...

Working through the decision process on trading the ol' BX on a new B7610. One thing I have been considering is the need of a block heater. I live in south-western PA. Never had any real problems starting the BX on cold winter mornings, but the B7610 is a bigger engine. Any opinions? Also...

I am considering trading my BX1800 for either a B7510 or B7610. I need a machine with a little more ground clearance and capability. The difference between the B7510 and B7610 is about 3 Hp and approximately $900. I run a 48 in tiller, 4 foot bruch hog, rear blade, stone rack and 60 in mower...

I'm going to be doing my 50 service.Is there 3 or 4 drains on the HST?Itried to do a search but couldn't find the answer,I know I've read here the manual is wrong.Thanks for your help and this great board for a newbe. tony 3542

I have a B7610 with a MMM, and FEL. I was wondering if anyone knew a easy way to clean the underneath of the MMM. I put the FEL down all the way to raise it up off the ground and try to get as best as possible underneath with my pressure washer wand, but it just doesn't seem to be high enough to...

I am about the pull the trigger and buy a Kubota b7610, MMM and BH. I am concerned with the process of removing the MMM and putting on the BH. Does the sub-frame stay on the tractor? How much time and work is switching from the 2 setups? I planning on using the tractor 75 percent of the...

I get my B7610 w/LA352 FEL in the morning. Hope the grass is dry to cut. I am taking the day off just to cut grass (play). But I hope I did not mess up. The Kubota literature, their Web site and the operator's manual I picked up today conflict. The literature and web site list up to a 72"...

I am narrowing things down to the B7610. Monday is the decider day. One thing is I am looking at a 54 inch wide box scraper to clear the tires. I am looking at scraping a few inches of soil to make a riding ring. I mow the area down to an inch. Can i go with a heavy box scraper like the...

On the way home I went back and test road a B7610 and then the B7800 for the second time. I like the additional power of the B7800 and figure it is the step above what I need and won't out grow. But this time I ran both machines wih the engines running so the PTO would be running at 540 rpm...

Has anyone ever tried locking up a 60" Kubota mmm to do some loader work? the book says to raise the deck (impossible to get that high) and pin the front of the deck with supplied pins into brackets. It is almost impossible to lift a 300 lb deck & place pins. It also looks to be very close to...

I am trying to decide if I really need a B7800 over the B7610 (or toerh equivalent brand sizes). I have about 3 acres of pasture and over an acre of lawn. A 60" deck will make grass cutting fast. Right know it takes over 8 hours with the 38" deck John Deere. The touble is I need to build and...

Hey Guys, Last Fall I posted some questions on buying a new Kubota. I was bouncing back and forth between a BX or B series. After reading endless posts and research I finally got a new B7610 with a LA352 loader and 60"MMM. Thanks for all the usefull info.

I joined this site a while back and have gained a lot of knowledge by reading. Now I've joined the club by putting money down on a B7610hst, r4's, Rear loaded, 352FEL, 60"MMM, landpride box scraper, folding ROPS, heavy duty alt, block heater.................$16900. I checked 3 local dealers and...

I noticed on my 7610 that it takes 1.5h of run time to log 1.0 hour on the hour meter. It has taken me almost 2 years to actually notice this. Has anyone else seen this?

buykubota-ML-898997-ML- Kubota specific thread

is $13k for a b7610 with low hours (under 100) and a rear mower a reasonable price? cheers, -bigballer

New to the forum but have been searching and reading posts for weeks now and really haven't found the answer I am looking for. I currently have a BX2230 with the 60" MMM and I am thinking about moving up to a B7610 with the 352 FEL and a 60" MMM. I am VERY happy with the cut I get using the...

Hi, I'm new to the site and in the process of narrowing the field on which machine to purchase. I'm leaning toward Kubota B7x10 because of reputation, but I can't help thinking about the loader lift height and capacity, also position control on the TC26. Either machine would be setup with...

Hi, This is my first post, so I'll apologize now if I'm posting in the wrong spot. I've been reading the forum for about 2 months now. You guys are full of info and have been really helpful. I too, like 50% of all the other new guys on this forum am stuck deciding between two machines. Finance...

Does anyone know much about the Turf Special listed on the Kubota website? The brochure shows it as a manual/gear transmission if I'm not mistaken. The website shows it hydrostatic. It also shows a suspended deck like a BX. Anyone got one? Opinions? Also, the website shows the 7610 loader...

buykubota-ML-877640-ML- Kubota specific thread

I've been researcing CUT and SCUT for months now. I seem to find myself searching this site daily. The help from just reading these post has been tremendous. That said. I have been searching and researching for a new tractor. This will be my first purchase so I'm having a hard time pulling the...

Just had my 7610 in for service yesterday... only 7.1 hrs on it. I had been using it on Sunday and in the afternoon I started it up and throttled up to about 1800rpm. All of a sudden I heard this god-awful knocking. I immediately shut it down because I didn't want to damage it. I checked all the...

I have done a couple of searches and still haven't found a definitive answer. What size rear blade would be best for a B7610? and what options are absolutely necessary? My situation: - rocky, heavy clay soil - a lot of final grading work in the near future - blade will also do snow removal on...

Hi all, Even though it's spring I'm starting my investigation on a snowblower for my B7610. The most obvious, and most expensive option is the $2500 front snowblower attachment that Kubota sells. I've been told that in order for the blower to attach, a sub-frame must be attached first. This...

Anybody use it? I.e., my B7610HSD Operator Manual states: Rear PTO speed #1: 540rpm pto @ 2600rpm engine Rear PTO speed #2: 960rpm pto @ 2554rpm engine I know some folks just want to throttle down with a higher PTO speed to save fuel cost running a rotary cutter for example, but is there any...

I’ve read a few posts on TBN that said the limiting factor on the larger B2710/2910 and MMM was the deck belt...they said it would squeal before the engine lugged down in tall wet grass implying the engine had more power than the deck could use. I’ll assume these belts and spindles were in good...

Sometimes my 7610 wont start. nothing. nada. Let it sit for a bit, and she'll start fine. First I thought it might be the PTO switch or the clutch switch. Checked them both with an ohm meter. They work ok. Then, I started experimenting to see if I could narrow it down. When it's running, I...

Hi all, First post to this great site - thanks for all the great information. Looking to purchase my first tractor for the following: - Cutting down that part of 3 acres of grass/pasture (i.e. not lawn) that our horse doesn't eat - probably only once per month - Periodic moving around of...

Not to bore anyone, but i am buying a 2630 with a backhoe from my dealer soon, he said that to help me out, he'll find someone who will buy my 7610 before he takes it in on trade. What can i expect him to give me on my 7610? tractor, 352 loader, 60" belly mower, 11 months old, 92 hrs.(Paid...

I cant believe this name was available. Thanks everyone for making it possible. Anyway, I am new to this forum because I accidently purchased a KUBOTA B7610 at auction. Yes, accidently. I am new to auctioning too. I made a few mistakes. 1, I thought I was bidding 11500 and 2, I shouldnt have...

Trying to lift/move rocks-boulders the front end loader would not pick up or even lift the side of the rock.Trying to push it got stuck in the mud. I do not know what the weight is but the rock was about 2 ft wide 2 ft high and 3 feet long. Any idea of the weight? A friend saw it and said it...

Question for owners with live-continous pto's. Could you please explain how you engage or disengage your pto on your B7610, or dose it just run all the time when the hydrostat pedal is pushed down. If you had a roto tiller on it would it just turn when the hydro pedal is pushed down? I am...

Hi all, Just a word of thanks to all of you who answered people's questions in the forums. Even though I didn't post any questions, many that I had were answered through searches or just by browsing. After narrowing my long list of possible tractors down to a few 2 or 3 I finally decided to...

Well, here I am again, still trying to make up my mind. Having finally decided on a pretty tight physical dimension envelope and eliminated a number of tractors for various reasons, having prices to work with and trade-in values for my B7100 to work with, I'm looking at the above 3 machines...

Hi All, I have been lurking here for several years now, and I am finally ready to replace my old 1948 Farmall Cub. It has been worked hard, and has done a fair job, but it is old, and my needs are more than it is capable of. It is time for the Cub to retire, be restored, and hit the Parade...

I wanted to get a comparison price for a B7610 with either the 302 or 352 loader in the New York, Michigan, Ontario area. Prices in Canada seem to be about $1,500 - $2,000 higher for the same model, even when our 15% tax and exchange are factored in. Thanks, Jason

Hope someone can help with this. My company purchased a B7610 about a month ago and we've had problems with starting and keeping it running from the get go. When I try to start it there does not seem to be any rhyme or reason but sometimes it will and sometimes it won't. You can try with the...

60\" mmm for B7610 value? I have the 60" mmm and it appears I may be looking to get rid of it. I have used it for 1.5 summers (which aren't too long up here in WI). I have kept it greased/cleaned/never stored outside and there is nothing wrong with it. Basically, the wife isn't comfortable...

Does anyone know what the B7610 weighs with a FEL and backhoe?

the last few times ive used the tractor, it has been below freezing. (7 degrees out yesterday) the loader will go up and the bucket will curl, but i cannot dump or drop the loader until the tractor has run for about a half hour or more...then all works fine. is it possible i have some water...

I'm looking to buy a B7610 in the spring. I'm just wondering on how good of a finish cut this machine does. It will have a 60"MMM and turf tires. I have a nice lawn and just want to ask current owners of this model if you have any opinions.

Approaching 50hr oil change and curious about what brand and weight of engine oil others are using in their B series Kubota's. Any information/opinions/results both positive and negative are greatly appreciated.

I've read all the posts for the Jinma 6 and am ready to take the plunge (if I can find one), however, I'm not convinced I have enough tractor to carry such a heavy machine. I believe the B7610 is only 1367 lbs and the LA352 loader adds another 500 lbs. Can anyone advise me on this? Thanks

After a lot of talk and a lot of questions I finally went out this weekend and got a B7610 with FEL, Curtis hardside cab, B2781 blower with hydraulic chute. $19,250 before tax. Should get it in 3 weeks. Just in time for snow fall. I am pumped like a little kid at Christmas. So now you...

owning-ML-745076-ML- Kubota specific post in General Forum.

I am looking at getting a front mount blower with a 7610 I am purchasing. One dealer is strongly recommending the BX2750B while another the B2781. Any thoughts on the two? Also, I am putting a Curtis cab on the tractor and wonder if it's worth the extra 1,000 to get hard side verses soft...

I started this process looking for a good used tractor with a cap of 15,000. I have looked around a lot and it looks like I have decided to go with the B7610 w/FEL and front mount blower. I definitely liked the B3030, but it was just too pricy and the 7800 is still a little more than I want to...

Can someone give a rough price on what a B7610 cost with Loader and backhoe? How good is this for snow removal and moving rocks. Rock weight around 800lbs will this tractor be enough or should I go green

Got a block heater with my B7610 when I bought it the first week of June and forgot about it until I had to put on a sweatshirt the other day. I don't want to be fiddling with it in December so I guess I'll have to address it now. In the attached photo you will see the heater on the workbench...

I searched the archives and couldn't find anyone using a hydraulic top link cylinder from Northern Tool. A 2500 psi 2" bore, 12" stroke, 22" Closed Pin distance for $62.00. Would something like this work for a top link?

Anyone experiencing sudden surges during slow acceleration “takeoff”particularly in high range at any RPM? The surge is very jerkiness and annoying. Also while moving along with steady acceleration the tractor feels like it went into passing gear and the ground speed increases. Tks in advance

Does anyone out there use a disc or plow with their B7610. I know (think) the 3 PH is strong enough to lift my KK Disc, but what about pulling it through the garden. I would leave the FEL on for extra weight.

Does anyone happen to know the size and pitch of the welded up turn buckle on the B7610 HST. The right side on mine binds so bad that a wrench is need to turn it and I want to chase the threads. I assume it is metric. Anyone know a resource for reverse threaded nuts and taps, so I can weld up...

Just got a 7610. I now have thirteen hours on it. GREAT little tractor with an AWFUL SEAT. The high back seat has a couple of flaws: (1) the suspension springs are too tall in the back leaving the seat tilting forward so the front doesnt' support your thighs. (2) the padding at the rear-most...

42 hours so far maybe do the 50 hr service this weekend. Bought the filters & Super UDT a couple of weeks ago when I was in the area of the dealer and I forgot which filter goes to what. Factory painted the whole thing grey. I could size them up or call the dealer but I'd like to be certain...

Last weekend I used my tractor for the first time to brush hog my 5 acres. I started on Saturday morning and was taking it very slowly as I wanted to break the tractor in correctly and also the brush was very tall and thick. A few hours into it I noticed that the tractor was starting to bog...

Ok here is another dumb question....I'm good with those... I've heard people saying that they have a B4681 subframe on a B7610. Since the Hoe that goes on this tractor is a 3 point. What does this subframe is used for? and are there any pictures somewhere available? Thanks.

Hello, I got a price for a 7610 with a LA272FL-1 the other day from a local dealer but I'm finding that most dealers are putting the LA352FL-1 on them. Can anyone tell me the difference between the two loaders? Thanks, Bob

The B7610 is plugging the air filter with exhaust soot. It plugs as such that I cannot even get it to flow air decent after blowing it out. The soot is too fine. The exhaust is getting sucked through the radiator turning the whole engine compartment black. I looked at adding a small extension to...

Hi, I have a couple of really Newbie questions so please bear with me . I took delivery of my new tractor last friday and read the manual...But am not sure about a couple of things, especially the levers on the tractors. And my dealer is not very helpful...... they say about anything and I...

I have 38 hours on my B7610HST and have noticed the HST grabbing a little harshly especially at low RPMs 1800 or so and when I don't have the peadal pushed in all the way. I'm under no assumption that it should drive like a Cadillac but it is a safety issue. Usually when I am trying to go slow...

Hi, I have been lurking a lot around and thanks to a lot of good people around here posting valuable information I was able to make a good choice for my needs. I just took delivery yesterday of my B7610 with B4672A BH and LA352 FEL.... and a couple of books While reading through them I saw...

Just looked at the B7610 with LA352 FL and RCK 60-24B mid mount loader out the door $16850.82. Good price? Is this a good unit. Have a need to cut 5+ acres with lots of landscaping to do and to take care of 1200' of driveway. Thanks KC

I recently purchased a B2765A front blade for my B7610. It’s a 60 incher with power angle. I already have the quick hitch and front loader with the proper valve. Thus, all I needed was the B2765A. It cost me $1,400.00 out the door. Photo of the crate is attached.

48\" or 54\" box scraper for B7610? I'm trying to figure out if I should get a 48" or 54" box scraper for a B7610. Both have 4 scarifiers. I figure the B7610 has the HP for a 54", but because of the light weight of the B7610 I'm wondering how much tire spinning there will be with a 54" box full...

I think I want some forks for my B7610 with an LA352 loader. Is my tractor big enough (24 hp) for them to be useful? Any suggestions for what I need? Best design? How much capacity? Good places to buy etc. I want to use them for moving brush, rocks, railroad ties, cement parking stops...

Here is a 60 hour report on my Kubota B7610 TLB. Started out as a 50 hour report several months ago, but time seemed to get away. I bought this tractor for some extensive landscape and construction work at our home in the foothills of California’s Sierra Nevada Mountains. It is equipped with...

Can anyone that has done the 50hr service on their B7610 post a list of Tools required: Filters,Oil, Supplies needed: Step by Step instructions: Any information will be greatly appreciated. John

When I check the hyd oil When I first pull out dip stick it's dry but after I put it back a pull it out again it shows slightly over full. Is this normal? It checks consistant each time after the fist check so I have been trusting the second check as correct and I have had to add oil a few...

Hi All. I'd like to run some hydraulics to the rear of my tractor to operate hydraulic cylinders on 3-point implements and possibily the top link. Now, I have a terrific B7610 that has done everything I've ever asked of it. I know the 2710 is supposed to have a place to attach a rear...

I should , and will, contact Woods with this question but I figured its the weekend and you guys are here to talk tractor so here it is. First off, does woods make a four point subframe kit for these tractors similar to the one for the BX models? Does the BH6000 sit in nice and close and use the...

After being too busy to mow over the last two weeks, I had one heck of a mess on my hands this weekend. My wife is insisting that we purchase a bagger for our B7610 so I stopped at the local dealer. He didn't have one in stock, but told me about a Kubota GCK60-24B Grass Catcher. He has never...

boy am i in a pickle! (and losing sleep over this) I put 30 hours on my B7610 and have decided that it is too small for my needs. The B7610 has done an amazing job with all of my chores, but it seems that the more jobs i finish, bigger and HEAVIER jobs pop up. Jobs include, clearing brush...

The Kubota brochure shows the B7610 as having an 18 hp PTO. It lists a 60" MMM as the biggest size available, but lists a 72" rear mount mower as available. Does the rear PTO have more power than the mid PTO? I currently use a Woods 72" rear mount finish mower on a 20hp PTO with no problems.

Well, the time has come for the 50hr. service of my new 7610. I currently have 49hrs. on it so I think the 50hr service will be happening this weekend. Is there anything other than the below listed items that I need to do? 4 drain plugs to drain HST oil HST oil filter Engine Oil Engine Oil...

The specs on the B2410 and B7610 are exactly the same--are these just the same machine with different numbers? If not, what is the difference between the two? Thanks--Craig

Anybody else changed the hydraulic fluid in their Kubota B7610? The manual says the capacity is a bit over 4 gallons. On draining mine I only got out about 2.5 gallons. I know you don't get it all on an oil change, but just about a third of the fluid, a gallon and a half, still in there...

B7610 Question on What it\'s worth I have a Kubota 7610 that now has about 38 hours on it and has been garage kept. I used it to do some landscaping around my house last summer and really have no further use for it. I plan to sell it locally and am just trying to get a sense of what it's...

I have been looking at tractors for quite sometime now and reading a ton on TBN. I must say there is a ton of info here. I was all set to buy a Kioti CK20HST with Fel as I really liked the tractor, but for some reason Agricredit didn't like me and Kubota took the app and approved it within an...

I will be getting a backhoe for a kubota B7610. Probably Woods BH6000. Should it be 4 point or 3 point? I am guessing that the 3 point is more convenient to take off but the 4 point is stronger.

I am looking to purchase a dump trailer with ramps to haul a B7610 with backhoe and front end loader. I only have a 1/2 GMC pickup so I am looking to stay as small (light) as possible. I was thinking 6'x10' 7000lb GVWR. I don't really care if the loader rests on or overhangs the front of the...

I've made a few comments over the past year that I bought a B7610 instead of a B7800 because it would fit alongside my shop. Well, here are a few photos to show the available space. When I bought the Kubota the shop wasn't yet started. But the dirt pad was finished. I had the plans made up...

I've been wrestling with which tractor to look at for a few weeks now. My needs are as follows: 1) Primary use will be to mow 3 acre lawn, and I would like to attach a 60" belly mower for maneuverability. I don't want to mark up the yard too bad, either. 2) Secondary use will be to use as a...

I am in the market for a new Kubota Tractor with an FEL and backhoe. Just wondered if anyone here had some feedback on the B7610 with a backhoe and how it performs. Pictures would be great.....as my dealer doesn't have any in stock so I couldn't see how they mounted up on the tractor. Do these...

My new B7610 arrived a few days ago and man have I been putting it to good use. I noticed that when I turn the wheels all the way to the right the steering arm just slightly hits the floorboard. I can feel it under my left foot. Today is Sunday so I couldnt call the dealer. Just wanted to know...

Well, now that winter's over I'm thinking about starting my snowplow DIY. Since there is a good possibility I will put a front blower on my B7610 at some point, I would like to make my DIY plow compatible with the oem QT subframe. Can anybody share or point me to an ESM-like exploded...

I know it might sound as though I am kissing up, but after spending many hours reading (and posting) to TBN, I have the utmost respect for your opinions. That being said, I would like to know what you all think I should do after getting the following quotes from two dealers: Dealer A...

Can someone out there tell me what the maximum vertical height (with ROPS folded preferably) is of a B7610? I am trying to figure out if it would fit into the shed portion of my garage and the spec pamphlet does not give this dimention. Also what is the max height with the BH connected to the...

O.K., I finally made the trek across the water to the Kubota dealer and this is what he quoted me: B7610HSD-F with LA352 FEL $13,900 Bucket tooth bar $400 48" Bush Hog Box scraper $500 Total with Washington tax $16,102 If I want the 4672 backhoe with subframe, that...

I just got my B7610 and am thinking about swapping the engine oil out for Mobil 1 Delvac synthetic. I run this in my Duramax diesel so it is readily available. Any oppinions on this? Thanks. Curtis

I am trying to decide between the B7610 or the B7800. I have owned a B1750 for 14 years and am trading it in. The B7610 basically is the replacement for the B1750 with 24 hp vs. my old 20 hp. I like the greater power of the B7800, but am concerned that it will not maneuver in tight quarters...

Started clearing a pathway thru the woods yesterday. When I came in and hosed off, I noticed fuel leaking from the fuel filter housing. After a bit of fussing, I determined the housing bowl was not seated correctly. Whether it was cross-threaded originally, or I bumped it working in the woods...

This is what I got! A new B7610with R4 tires and a LA 352 FEL with a toothbar kit. I also talked the CFO into a brushhog 48" cutter, 48" box blade, 60" RMM and a 72" 3pt blade. Do I have a great wife of what? Should get it this weekend.

Well, I pulled the trigger about 2hrs ago on a Kubota B7610 w/LA352 FEL & 60" MMM. I expect to be taking delivery this weekend, or at least I hope so, if not it will be early next week. They have to wait to get the alternator, box blade and auger for my PHD. I purchased the following...

Hi all, like many I've been lurking and reading about tractors on here for some time now. Today I finally went out and purchased a B7610HSD with a 352 loader, 4ft. bushhog, 4ft. boxblade, and 60" rear PTO finish mower for $14,950. I hope that sounds reasonable, because once I got there and...

Sirs, I picked up a Leinbach L7400 PHD with 12” auger from an equipment yard for $525.00 out the door. I made the guy promise to take it back if it didn’t fit my B7610. I needn’t have worried. As the photos show, it fits just fine. In the full up position there is 12” of clearance. I...

Been lookin for a tractor and looked at the CK29 really hard and had my mind made up until today when I stopped by a Bota dealer and he offered me a B7610 for the same price as the CK20HST. The Bota does have more PTO HP and a 24 HP engine, just that it looks like maybe the Kioti is stronger...

I am looking at the mahindra 2015hst, kioti ck20 hst, and the kubota b7610 hst, and can't find anyone in my area that has experiance with any or all off them. Leaning toward the mahindra have a dealer about 15 miles away and a good price, the dealers for the kubota, and the Kioti are both in the...

Just got prices on a new B7610 with a 60" MMM and a 352 FEL. The first dealer priced at $15250. The other dealer priced at $15450. The first dealer is about 20 mins the second dealer is about 15 mins away from my home. I like the second dealer better, but he is newer dealer ( less than a...

As tempting as that 0%/48 was, the positively horrible response of the local blue dealer sealed the deal for me. So I saved $2k and the tractor gets paid off 2 years earlier. Thanks to the positive comments here and my field tests, I'm confident I bot a great little CUT, but I'm sure to be...

I'm looking for a compact tractor for a hobby farm. It seems to me that the B7610 will dig the holes for the fencing and clear the brush for the pasture, but it seems like it may be pushed to the limit when it comes to moving round bales, especially with the loader.

New to site, Looking to buy first tractor. Mostly used for mowing(approx. 3 acres), with light FEL work around the house. Will use to pull small trailer with fire wood also. Looking at B7610 vs the B7800 with FEL and MMM.

I've only had it a little over a month. Better late than never I guess. In this I was pulling out some stumps.

I want to post some pictures, but when I try to resize them they're too small too even make out. I also wanted to post some pictures in the gallery, but same problem. What programs or whatever do I need to make them decent size and quality? Jeff.

I used my RMM mower on my B7610 for the first time today, and I stop regularly to put it in 4WD or to take it out of 4WD. With the PTO on 540 when I press the clutch in it makes a knocking sound. It has something to do with the PTO, because it (the noise) gradually slows and stops with the...

Some photos of the rear hyd outlets on the B7610 if it works. I'm not sure how to attach photos.

This is a follow up to my previous post on B7610 wheel wobble. I asked the dealer to look at the wobble and they contacted kubota. The response was that wheel wobble is inherent to the design of the hub assembly and at the speed a B7610 operates at it is not a problem. I'm not sure what to think.

First, I currently own a bx2200. Its decent at pulling a box blade, but the loader is a bit weak and traction on turfs is marginal. Don't get me wrong it's a great machine! The dealer doesn't have a 7610 in stock, but I'm willing to buy sight unseen because I've been so impressed with the bx...

How fast are other B7610's running on high idle no load? Dealer came out today and turned ours up to 2,800 from 2,650.

I just had the B7610 to the dealer for the 50 hr service. I had them put it on the dino. Kubota specifications call for 18 pto hp @540 pto rpm. I called the Kubota regional service dept to confirm this as there spec. It does not have any where near 18 pto hp at 540 pto rpm. The dino we were...

The 7610 has an annoying “design feature.” The exhaust exits right on the mower deck attachment handle and front brush guard. It gets everything, including your hands sooty. Before photo attached.

I got a price for a B7610 HSD with Industrial tires, the LA352 loader and a Land Pride RTA1550 tiller of $15,000. I live in the Portland, OR area. Is that a good price or is it too much?

In case it hasn’t been covered before, the B7610 with R4’s takes 35 gallons of WW fluid. A little over 17 gallons in each rear tire. I used a drill pump, fluid filler fitting, and some ½" poly pipe I had lying around. The whole process took just over an hour. There were no complications...

The rear wheels on the B7610 wobble a lot. When we first got it one wobbled and one ran straight. They were in a wider position. I've since moved them in and out several times and now moved them in to the narrowest position where they will stay until worn out or a flat. I always figured I could...

After all the questions about the 7510, I opted for the 7610. That's about how I work. Oh well it keeps everybody on their toes. B7610HSTw/LA352 4' BushHog Cutter 5' Land Pride RMM 4' Agmeir Box Blade 16' Lowboy Hooks welded on...

I recently added some floodlights to the rear of the tractor using home made L brackets fastened into the existing side light brackets. The lights are fed by a relay, which is wired into the headlight switch. When the headlights are turned on, the rears also come on. Photo attached.

What is the correct paint from Kubota for a B7610. Dealer had two shades and gave me Bright orange II. Is this the correct paint? I'm painting the rims and spacers I'm using for duals and it dosen't look right. More like a flat color than a gloss. Would like them to closely match. Thanks

I just finished installing auxiliary lights on my B7610. After much shopping, ordering and returning, I decided on the 5” KC Hilites 50 series with 100W bulbs because 1. They are reasonably tough (made in USA!), 2. All the parts are individually available from the factory, including driving...

We have a B7610 and having a terrible time keeping it running at pto speed under any kind of a load. Even with the lightest load it wants to lug down 2-300 rpm below pto speed but has good power at that level with throttle at full speed or set to run that speed. Is this normal for these? I don't...

The B7610 has a chain stabalizer for the 3-point hitch. I guess a backhoe is hard on the chains and I broke one of mine at some point this summer. The dealer replaced it under warranty. The chains were always difficult to adjust and I always managed to bash a knuckle or two when adjusting...

i ve been thinking about this tractor for a couple of weeks, but havent pulled the trigger. im looking for the bare tractor, i will add a rear mower this summer. for now ill be using it to grade my driveway and move snow. my local dealer who sells tractors to the more wealthy people in the...

I work for a municipality, we just got a new B7610 a while back. I have been using it to pull our old horse grader. This is a 2 man operation one on the grader one on the tractor. I would like to make the grader hydrolic as the labor is not available. This means I'd need 3 remote hydrolic sets...

Hello, I just was recommended to this site. I work for a municipality. We just got a new B7610 hst with R-4 industrial tires. We would like to install duals on the back for added stability while mowing our dikes around the stabilization ponds. We use a 72" rear finishing mower. I had planed...

I need advice on a rear blade for a Kubota B7610. I was thinking I probably want a 5 ft blade. Am I on the right track or would a 6 ft blade be better? A local dealer has a new Frontier blade for $275. I know they are JD and green but none of my implements match my tractor color so I can...

Anyone know of a mfg for a frontend loader with a 4n1 bucket? I plan to buy a new B7610 and the dealer is telling me I have to buy a Kubota frontend loader and then buy an aftermarket 4n1 bucket, total price $5500. Any ideas. Thanks

I have been reading the specs on both of these and they seem to have the same engine. Looks like the 7610 is just a spartan 2410. Is this correct? The price difference is less than 2k.

Hello, I'm new to the forum and had a question regarding the do it yourself difficulty of replacing the radiator on a Kubota B7610. Parts from the dealer are running about $350 including seals and net guide. I'm mechanically inclined, but have mostly worked on cars. Thanks, Don

My sales's manager's son just bought a B7610, FEL, MMM and BB. (19 hours of seat time his first weekend) He cannot find a way to "pin up" or somehow lock the MMM in the highest position while he is using the box blade. I can't imagine there is not some way to lock the deck up, and of course...

A friend who is purchasing a B7800 told me the dealer he is buying from told him the B7610 will be retired after 2004. Does anyone know if this is true? I have just purchased a B7610, and am wondering about parts availability in the future. Hope I didn't buy an extinct tractor.

My hydro quick connects, well actually only ONE, the red one, sometimes has trouble. It won't latch and at times when installing the loader, and other times it will not release, when trying to remove the loader. I've checked to make sure the connector was clean from dirt. Played around with it...

New to this forum. Live in central MA. Making a decision NH TC24 vs Kubota B7610. Both have HST drive w/R4 tires. TC24 equiped w/;loader; woods backhoe; soft cab w/heat, wiper, lghts, strobe; 51" snow blower w/man rotation & elect deflection ($28299.). B7610 equiped w/ LA352 loader: Bradco 3265...

After lurking (and learning) for some time, I decided to purchase a BX2200 with turf tires, FEL, 60” MMM and BX2750 front snow blower. This was back in August of 2003. I later added a 48” box blade and 48” KK rough cutter and bar tires. After about one year and 140 hours of use, I traded it...

Very very impressed by the mowing capabilities of this machine. Mowed some hay that I wouldn't even touch with the lawn tractor and the 7610 didn't even flinch. Even at just 2,000 rpm. I had a slight ergonomic problem (rather human errror) with the loader lever. I thought the loader was not...

After a long wait of about 2 1/2 weeks my B7610 will be arriving this afternoon. I will post some pics along with first impressions whenever I can. Oh boy, is this going to be great!

Both are similar sizes, prices, and both hydrostatic. Both have loaders (JD 410 vs Kubota LA352) with similar capabilities. Both have backhoes (JD 46 vs Kubota B4672A) with similar capabilities. Drove the Kubota and liked it, but I didn't like the brake pedals so close to the forward pedal, on...

Hi, I've been reading and learning all about the kubota compacts on this forum for the past several months. As a newbie I knew nothing. I've learned enough to be dangerous and now I'm ready to buy and am wondering if there is $1000 dollars worth of difference between the 7610 and the 7510...

Any "hidden" options or creature comforts I should consider with the B7610? Is there a list of basic maint. items to have on hand? I'm considering the FEL tooth bar 2 hooks, BH, MMM, 48" Bush Hog, and Woods 48" Box Scrapper/Rippers. Thanks

Just thought I would post a few pictures of the cup holder that I built for my B7610. I made it out of aluminum plate and attatched it using the existing ROPS mounting bolts.

Hello All Priced a 7610 today with 60"MMM and a front power angle grader blade. The dealer came in at $14500 delivered, no tax. I was hoping for $14-$14250. I might be able to get some manuals and oil out of him but probably not much more. Is the $14500 too much? I'm in Western PA. Sure would...

Has anybody owned these two machines? If so, I'd like to hear your thoughts on the two. Are they completely different or somewhat similar in their overall abilities? Basically, I'm wondering if it's worth moving up to the 7610 (much greater potential?) or just staying with my (paid off) BX2200...

Anybody have a tight throttle on their Kubota and find out how to get it to operate smoother? My B7610 now has 35 hours. I'm moving a lot of dirt from some excavation to the back of the property. I try to set the engine speed around 2,100 to 2,200 rpm to take it easy on me and the tractor...

Here is a 25+ hour report on my B7610 Tractor Loader & Backhoe. I bought this tractor for some extensive landscape and construction work at our home here in Placerville, California. It came equipped with a LA352 loader, B4672 Backhoe (12” bucket), a Gearmore box scraper and R4 tires. The...

I'm new, and know very little about tractors other than what I've thus far been fortunate enough to read on this board. I'm trying to select the right tractor for my application. I have 15 flat, cleared acres. About 2 to 3 acres are finish mowed. I intend to acquire the tractor to assist in...

I have been in the shadows for along time on the board and have found some very helpful information. I am at point that I have to be honest with my self that the B7610 is not what I need for my needs. I had intended on doing some small scale landscaping on the side but the insurance and all the...

Hello, all I used this forum to decide to purchase a Kubota B7610HST, I pick it up Thursday I had a BX2230 for one night and returned it for the larger tractor. I have a small horse farm and want the larger tractor. This will be my mowing tractor around where I can't fit my larger Mower. I will...

Hello, all I used this forum to decide to purchase a Kubota B7610HST, I pick it up Thursday I had a BX2230 for one night and returned it for the larger tractor. I have a small horse farm and want the larger tractor. This will be my mowing tractor around where I can't fit my larger Mower. I...

I left work early to meet them when they delivered my new B7610 with 60"MMM and LA352 FEL. I was excited, thinking I would have some extra time to play, I mean use the tractor for important work. When I got home it was raining. I only got to drive it into the garage. I was left to spend the...

I have narrowed my search down to a Kubota B7510 or B7610. My dealer has quoted me what seems to be the going price. He has both units in stock. Both have a 60"MMM and a LA302FL-1 loader. I received a post that made me question whether you can use that loader on the B7610, so I checked the...

I have read so many posts about what implements people have and was wondering if I was limited to a 4 foot tiller for my B7610 or if I could go a little bigger. The dealers in my area have mostly said that I would be limited to 4 foot tiller because of the weight, but I I see others on TBN...

I am new to the tractor world but I am getting into it rather quickly. I have decided on the B7610HST with FEL and 60 inch MMM and a 4 foot box blade. The dealer has quoted me a price of $15000. Is that good or not? I have searched for any earlier posts on this tractor and haven't found...

Anyone know whether EZ Weight brackets will fit over the projecting part of a B7610 axle when it's set to the narrow setting (48")? Alternatively, how wide is the tractor when the wheels are set out to the axle ends? Bill

Hello to all, I just purchased a new B7610 and took delivery on Saturday March 27th. I haven't had much time in the seat yet. Rained on Saturday. I am still getting aclimated to everything. This is my first compact tractor. Looking forward to hearing from other B7610, or other model owners. I...

just bought a new B7610, i love the tractor but there is some vibration in the motor from about 1500 rpms down to idle. is this normal for the 3cyl. eng? anything from there up it runs smooth.

After 6 years of looking and two years of great info on this site, I made the decision to get a B7610 and have had it for a week. I really appreciate the information provided on this site. It gave me a basis to ask intelligent questions with the dealers. It is so much better for brush mowing...

I now have 2.3 hours on my new machine. for xxx and grins i lifted up my 4 wheeler with the front loader. (i think that was worth a tim allen grunt or 2) for being a smaller tractor, this baby really has some oomph! putting in my new lawn...landscaping...etc etc etc just switched from...

i finally took the plunge and went with the 7610...FEL...MMM...5' box scraper...block heater...filled tires. someone will be having fun this weekend this site helped a lot while trying to figure out which tractor to get. hopefully after some seat time ill be able to answer some question...

How would these two compare? The Kubota seems too priced higher, but has less horsepower. It has the hydro shift which isn't a big deal to me. How do they stack up with FEL lifting weights, and 3pt hitch power? Is there a comparison between the two? Which is more all around tractor.

How would these two compare? The Kubota seems too priced higher, but has less horsepower, are we paying for bells and whistles? It has the hydro shift which isn't a big deal to me. How do they stack up with FEL lifting weights, and 3pt hitch power? Is there a comparison between the two?

It appears to me, an acknowledge novice, that the B7610 and B2410 are virtually identical-except $2000 in price. What am I missing/ Thanks Maury

these 2 tractors appear to have quite a bit in common, but price is quite a bit different. what are the main differences that make up the price differences? thanks John

does anybody have any info on this new tractor? options/differences/price compared to the b7500? i am debating on this or the bx2230 with fel and mmm. (i have seen the page on the deen implement site, but that is all) thanks John

i just ordered a new B7610, should take delivery sometime around the last of Jan. i tried to find out all i could about the tractor but there didn't seem to be all that much information available. from what i can find out it's about the same as a B7500 with little more HP and some improvements...