light

Can anyone identify the plug I need to tap into the power that would normally go to the rear safety lights? This jack is on both sides just under the top of the cab. Thanks in advance.

The Kubota technician read the ECM and said I need to replace the Exhaust Gas Temp Sensor 0 (zero), Black. The Kubota parts site says it is Sensor (Thermo,0) Black; 1J500-18500. I think I can order one online and do it myself. Can I expect the check engine light to then go off, tractor be able...

My dk40 hst peddle seemed hard to push, I then noticed a dash light that isn’t in the manual. It shows a tractor with a paddle lock underneath it with an arrow going forward. When I push the brake on, the light goes off and peddle is easy to push, when I release pressure on brake, light comes...

Hi guys and gals. I've been reading/ following this forum for years and now it is finally my turn to ask for some help. My tractor is an 06 Kubota L3130 GST. About 2 months or so ago I was bush hogging when a good size stick stood back up under the tractor while moving forward and took out the...

My Emax 22S HST when operating for about 20 minutes I get an Engine warning light that flashes 2 times slow then 4 times fast what is this indicating?

So this the the second time in my tractors 335 hour history that the emission light has come on and pretty much stayed on. The first time this happened was at around 200 hours. Last time the tractor was still under warranty and Branson gave me a remanufactured or "cooked off" canister. I...

I’m fascinated by welding… I do a fair amount of repair and thought I’d try to learn the basics. Removing a stuck bolt, repairing a mower deck… I’m sure they have 1,000 uses. Eastwood has one on sale right now, seems well received. Unsure what to look for… 110v is all my house has right now.

New to me B2150. Going thru everything as a few things were neglected by previous owner. Oil pressure light doesn’t come on with key. Pulled dash hoping it was bulb, but bulb confirmed good. Sending unit or something else? Are they a generic item or Kubota only part? Appreciate any thoughts!

New guy here with a new MF 1835e. As with most new 'toys' I acquire, some modifications/upgrades are needed. In my case, and for now, the upgrade is adding a rear work/flood light. I have the light(s) mounted on the inside of the lower portion of the ROPS. The question is, where to get 12v...

I'm trying to find replacement light sockets for the lower front "work lights". The plastic is crumbling... I thought I had found some the would work, but the socket depth puts the bulb to deep into the lens housing and hits the lens. I'd rather not silicone them in, with my luck one will burn...

I'm trying to find replacement light sockets for the lower front "work lights". The plastic is crumbling... I thought I had found some the would work, but the socket depth puts the bulb to deep into the lens housing and hits the lens. I'd rather not silicone them in, with my luck one will burn...