oil leak

My trusty 1984 Husky Rancher 50 sprung a bar oil leak. I shoved some plastic tubing into the hole above the filler which "fixed" the leak well enough to enable the saw to be used but hopefully it can be fixed properly. What was in that hole? Any chance I can find a replacement, maybe even...

Hey guys I have an oil leak underneath the cab. There it looks like it's coming from right under the floor somewhere but there is no clear sign where it's coming from What is the best way to lift the cab to to get a better look?

Looking for any suggestions or help with my 2015 Mahindra emax 25 hst. I have a leak coming somewhere from the front of the transmission. It's hard to tell exactly where so I started to take the black plastic cover that's over the driveshaft but wasn't sure how to get the deck adjustment knob...

I have a 2005 BX23. For quite some time it has been leaving a little trail of hydraulic oil that drips off the bottom under the HST. I have searched to no avail; I finally found a mechanic who understands small Kubotas and he spent the time to find the problem. There's an opening on the top...

My King Kutter brush hog is losing gear oil from the gear box. It's not coming out around the gear box on top of the deck. Any idea where it would be coming out?

This is a 1985 SAME (now SDF) 85HP Mercury 85. I had a lot of of leaking from the starter motor (???!!), it was from the bell housing, flying around in there. I assumed it had to be the rear main engine seal, but it turns out to be gear oil leaking through an end cap. There's an Oring in there...

Hi all, my old John deere 2040s is leaking oil out the connection between the link arms and the diff housing. My local (400kms away) dealer was nice enough to sell me the seals but I'm buggered if I cam get em out. I can get the link arms off and the shaft to slide out either side but I can...

Have a new mt226 with 40 hours. Looking it over and i noticed the rear of the oil pan is seeping. Checked in the bell housing and its not the rear main. I checked a few pan bolts to see if they were loose and nope. Trying to decide if im going to leave it or send it in for warranty. Little...

I pass along so it might help someone, seems kind of unusual. I bought my Mahindra 5010 used. After using it awhile, I started noticing some kind of fluid on the ground after I moved the tractor from where it was parked in the pasture the night before. But it seemed to be under the wheels, not...

Hi, I’ve noticed some oil in the side of the tractors engine after about 30 mins work, don’t know where its coming from, I’ll attach a photo. 2006 Zetor 6340

Hi, our Massey 4609 loses about a litre of oil while running the hammer mill. We would not know where it goes, but when we work it a bit harder it blows it all out of the smokestack - soot all over! Checked the turbo -leaky seal could cause this- seems to work fine. Dealer thinks a leaky valve...