135 Locked up on startup!

   / 135 Locked up on startup! #11  
Ok Which one is the gearbox filler hole? I just tried again and as soon as you feel some resistance in the clutch i can turn the engine over. In the top 1/3rd of travel i'd say. That and the fact that i was able to roll the tractor with my trucks help tells me its not stuck in a gear. I think?
I think you locked it in gear AND sheer the sheersleeve that connect the box to the diff ?
 
   / 135 Locked up on startup!
  • Thread Starter
#14  
I wouldn't be able to roll it if it was locked in gear though right? I took this pic through the hole. It appears to move between gears ok. This pic is neutral.

20180422_162628_resized.jpg
 
   / 135 Locked up on startup!
  • Thread Starter
#16  
Yes for the left rail!
And the big gear ?

The one on the left of the pic? It moves back and forth with the lever. And i'm in Belleville, Ontario Canada.
 
   / 135 Locked up on startup!
  • Thread Starter
#19  
Hey ya still :( Check this out. I found these marks / cracks with a Borescope. This is looking forward from the fill hole. This has to do with the Multipower I think?

20180423_170253_resized.jpg20180423_170301_resized.jpg20180423_170306_resized.jpg
 
Last edited:

Tractor & Equipment Auctions

2020 Case-IH 250 Magnum (A53314)
2020 Case-IH 250...
2007 Honda CR-V SUV (A53424)
2007 Honda CR-V...
2011 CIRCLE M 32 FOOT GOOSENECK (A53843)
2011 CIRCLE M 32...
KEENCO MIDDLE BUSTER PLOW (A57192)
KEENCO MIDDLE...
2011 Chevrolet Traverse 1LT SUV (A53424)
2011 Chevrolet...
2007 MACK CV713 WINCH TRUCK (A53843)
2007 MACK CV713...
 
Top