My PTO has become "Iffy" on engagement. Sometimes it will engage, sometimes it won't. This evening, it wouldn't engage, so I attempted to clear any debris that might be interfering with the lever.
It finally engaged, but was weak. I was using a PHD, and it was like the power was weak (touch the ground with the PHD and it would stop...lift it and it would turn...this was at low and mid RPMs...didn't try it at high RPMs). It got stronger as I used it, but never as strong as it should be, torque wise.
I also noticed that the PTO selector would either shift to allow PTO choice, or it wouldn't shift at all. This has never happened.
I'm thinking that there's debris, or something, interfering with the lever(s)....but I'll need to pull the left rear wheel to get a look at it.
Any ideas?
It finally engaged, but was weak. I was using a PHD, and it was like the power was weak (touch the ground with the PHD and it would stop...lift it and it would turn...this was at low and mid RPMs...didn't try it at high RPMs). It got stronger as I used it, but never as strong as it should be, torque wise.
I also noticed that the PTO selector would either shift to allow PTO choice, or it wouldn't shift at all. This has never happened.
I'm thinking that there's debris, or something, interfering with the lever(s)....but I'll need to pull the left rear wheel to get a look at it.
Any ideas?
