3005 replacing the 790

[dirt ditch]

Comparing hydraulic pressure in the 3005 and 790 manuals, 2422-2698 psi for the 3005 and 2050 psi for the 790.

 

[irwin]

Further back in the manual there is a picture of of the tractor with a 3005 decal--not in the same place the 790 decal is but more like the 3xxx series placement. Maybe it really is the next generation.

Sure looks like this is the manual for a 3005 to me, no HST, a gear tranny, same 3pt lift "815lbs"

See "Service Engine" section " at "Cleaning Grill and Side Screens" for the picture with 3005 decal.

 

[Muxster]

It looks like it has a bigger alternator, 40 Amp vs. 20 Amp for the for the 790. Also the main hydraulic pump is a bit bigger, 5.6 GPM vs. 5.4 GPM and they probably did the shim thing on the relief valve to get the higher pressure.

 

[RobS]

It looks like it has a bigger alternator, 40 Amp vs. 20 Amp for the for the 790. Also the main hydraulic pump is a bit bigger, 5.6 GPM vs. 5.4 GPM and they probably did the shim thing on the relief valve to get the higher pressure.

As much as I respect John Deere, I have to ask "why" on this one. I can see a model number change for a substantial change but my neighbors 790 has more differences to my 790 than this. Strange...

 

[JiminGa]

I've heard Deere did this just to align model numbers

 

[kennyd]

As much as I respect John Deere, I have to ask "why" on this one. I can see a model number change for a substantial change but my neighbors 790 has more differences to my 790 than this. Strange...

I thought I read that it had a different engine in it to meet emissions regulations, I think one of the dealer's that post's here wrote that?

 

[gamble77]

Correct, the two main reasons were to bring the model numbers in line with the rest of the CUT line-up as well as somehow being able to denote the motor EPA changes.

 

[elalexander]

Going to another Deere dealer in the morning. He has one on the floor

 

[RobS]

Takin' a camera? Notepad? We'll expect a full report!

 

[ChuckinNH]

You will probably see a 4105 there too...... I saw one today.