Backhoe 447 Backhoe teeth replacement

[jba3520]

Has anyone here been able to get the original forged teeth for the 12inch bucket. All I can find are the welded teeth and they don't hold up. The dealer says the welded teeth are the replacement p/n T2A

 

[joecdeere]

call these guys, don't know if they'll only sell a couple of teeth, but if not ask for their nearest dealer. AnyFord/NH that deals in backhoes can get them too



Getco Ltd. -
Seattle Sales & Distribution Center
421 5th Avenue NW
Pacific, WA 98047 P: 253-939-6609
F: 253-939-6613
TF: 800-273-9327

Ground Engaging Tools: Ripper Teeth, Bucket Teeth, Scarifiers, Compaction Tool, Wear Parts | Getco, Ltd.

 

[AKfish]

If you can't find the old type teeth --- try hardsurfacing the welded ones. That's what I ultimately did. Run a bead around the leading edge of the tooth and down the face, too.

Good luck.

AKfish

 

[Cidertom]

I too am looking. If you look back you can find pix in a previous post of mine. My issue wasn't the wear surface wearing out, it was the thin metal shell. They distort and then the tooth falls off. Next week I am taking a trip to the big town and am going to take a sample by the bobcat (r) dealer and see if their teeth are made better.

I unlike some have had no issue with the root breaking off.