A backup camera for $50!!!!!!!!!!!

[94BULLITT]

The monitor itself is roughly 7/16" thick 4 7/16" tall and 6 3/4" wide.

 

[mangus580]

Thanks!

So looking at it, the second box I posted would work quite well. Granted, you wouldnt be able to operate any buttons, but it sure would stay dry!

I did notice the clear lid has a molding dimple in it, I wonder if that would really effect the view at all. I will have to order stuff here in the next week or 2 and start messing with it.

 

[94BULLITT]

Thanks!

So looking at it, the second box I posted would work quite well. Granted, you wouldnt be able to operate any buttons, but it sure would stay dry!

I did notice the clear lid has a molding dimple in it, I wonder if that would really effect the view at all. I will have to order stuff here in the next week or 2 and start messing with it.

No problem. if you need any thing else let me know.

The monitor comes with a remote. It is not very powerful but it may work through the box.

With the dimple being close to the side I doubt it will hurt anything.

 

[newbury]

<snip>
ALSO: There is another camera by Esky that is a later model with a different design, but it also has guidelines:
Amazon.com : [Rear View Camera] Eskyｮ EC170-08 100% Waterproof Vehicle Car Rearview Backup Camera High-definition Cmos 170 Degree Viewing Angle : Car Electronics

And is on sale at Amazon for $21 NOW as a lightning deal.
Amazon.com : Esky EC170-08 Waterproof Vehicle Car Rear view Backup Camera 170 Degree Viewing Angle : Car Electronics

 

[s219]

That sure doesn't look any different than the camera I paid $12 for from a different vendor/brand:

Amazon.com : Car Rear Vehicle Backup View Camera (Waterproof) : Electronics

Since the cameras both have composite video out, there isn't going to be any real difference in resolution/fidelity (i.e., any claims of "HD" aren't realistic).

 

[sodamo]

This has been an educational thread - thanks.

I'd like to explore a different approach. I have open station tractors. Thinking it would be nice to be able to mount camera or two but instead of a permanent display just watch on my iPhone or iPad. My thinking is cost would basically be the cameras and if it worked well I could mount as many and wherever according to task as long as I had power. I'd likely add to rear of my Tundra for the trailer hitch and backing. Using my iPhone/iPad I won't be concerned with weathering and would only need the one I was using instead of multiple permanent units.
Any thoughts, maybe camera suggestions. 12vdc.

David Sent from my iPad Air using TractorByNet

 

[varmint]

Surely there's a cheaper solution than $32 to protect a $20 monitor? And, what about heat build-up (if any?). Once you set the contrast, intensity, so forth, there isn't any need to access the monitor, so maybe some sort of enclosure is the ticket.

 

[s219]

Surely there's a cheaper solution than $32 to protect a $20 monitor? And, what about heat build-up (if any?). Once you set the contrast, intensity, so forth, there isn't any need to access the monitor, so maybe some sort of enclosure is the ticket.

I think babying a $20 monitor isn't even needed. A zip lock back is all I have been using to protect mine when it's wet out.

 

[mangus580]

I think babying a $20 monitor isn't even needed. A zip lock back is all I have been using to protect mine when it's wet out.

I am kot worried about it during use... it's the times I may get caught unaware, or have to leave the tractor outside for a couple days, or the like that I am concerned about.

Maybe the last box I posted is the ticket, but I do wonder if it might need some ventilation on the bottom.

 

[94BULLITT]

This has been an educational thread - thanks.

I'd like to explore a different approach. I have open station tractors. Thinking it would be nice to be able to mount camera or two but instead of a permanent display just watch on my iPhone or iPad. My thinking is cost would basically be the cameras and if it worked well I could mount as many and wherever according to task as long as I had power. I'd likely add to rear of my Tundra for the trailer hitch and backing. Using my iPhone/iPad I won't be concerned with weathering and would only need the one I was using instead of multiple permanent units.
Any thoughts, maybe camera suggestions. 12vdc.

David Sent from my iPad Air using TractorByNet

When is first started thinking about adding a back up camera I thought about using my phone or tablet for the monitor. I found out there is not an easy way to do this and it would be costly. For the $20 some dollars the monitor costs I'm not sure it is worth trying to make it work over a phone or tablet.

My neighbor put a Hopkins back up camera with sensors on his truck. It is a pretty nice setup. It uses the 7 pin connector on the back of the truck.

Hopkins 50002 Smart Hitch Camera System:Amazon:Automotive