OP
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Adding a 12volt outlet
- Thread starter RoyJackson
- Start date
- Views: 34325
cttractor
Silver Member
Great looking job GRS!
OP
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Glen Watkins
Gold Member
- Joined
- Dec 19, 2009
- Messages
- 491
- Tractor
- 2007 John Deere 4320 Cab Tractor
Lookin good Roy!:thumbsup:
grsthegreat
Super Star Member
Came out nice Roy, now just get an extension cord for the coiled wire and your done.
CompactTractorFan
Super Member
OP
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Thanks, CTF...and to think...YOU were the inspiration!
Yes, I added the reflective tape on the loader arms and masts as well as the ROPS. ACE hardware has it...2 or 3 bucks for a 24" strip.
CompactTractorFan
Super Member
:laughing:
I may have been the inspiration but you definitely outdid me!
That tape is a good idea. I'll have to look into that...The BX came with two small pieces of reflective tape on the ROPS, but I don't think these are real effective...
OP
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 24,646
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
:laughing:
I may have been the inspiration but you definitely outdid me!
That tape is a good idea. I'll have to look into that...The BX came with two small pieces of reflective tape on the ROPS, but I don't think these are real effective...
If you ever go on the road, you want to be as visible as possible.
If you recall my old 790...well, I worked at a Harley Davidson supplier when I owned that machine. If you look at an HD rear tag bracket, you'll see a retangular reflector. We used to get those things in the reusable shipping carts supplied by HD to ship the rear tag bracket...although we did not install the reflector.
Anyway, I had a couple, three dozen of those reflectors...must have put 12-15 of them on the rear surface of the 790's ROPS. A car's headlamps could pick up those reflectors from way back!
Thinking of reflectors...you can get the stick on type at most any hardware store...might be worth putting a few on your Kubota's ROPS.
cttractor
Silver Member
That's an excellent suggestion! The only time that'll fail us is when on the road on a foggy day or in a blizzard -- that's what our warning lights are for. Extra visibility never hurts and reflective tape is cheap.
