Adding lights to ROPS

   / Adding lights to ROPS #31  
Bob,

The link should take you to what I used. They seem to fairly strong to me but they have to be flat on your roll bar to be good. My roll bar on the outer edges is rolled some and there the magnets don't hold to well. Yes trees and branches would knock them off. But I put them under my roll bar so they won't get hit so easy and I like the flexibility of being able to set them back wards really fast.

Grounding Magnets

Just take the bolts out and place your lights in place. Will need washers, enouh to get the bolt under flush for magnet to sit full.

murph
 
   / Adding lights to ROPS
  • Thread Starter
#32  
Murph,

Thanks. I had done a Harbor search for "magnetic ground", but this item did not come up. I'm going to order three right now.

Bob
 
   / Adding lights to ROPS #33  
Hope it works out ok for you. They are kind of expensive so maybe you just want to try one and see if they hold strong enough for you. Harbor Freight does have a return policy I believe if you don't like them.

murph
 

Tractor & Equipment Auctions

MAGNUM PRODUCTS LIGHT TOWER (A50854)
MAGNUM PRODUCTS...
2014 KENWORTH W900 MID-ROOF SLEEPER (A50854)
2014 KENWORTH W900...
2018 Dodge Grand Caravan SXT Van (A50324)
2018 Dodge Grand...
2014 CATERPILLAR CT660S SBA 6X4 DUMP TRUCK (A51406)
2014 CATERPILLAR...
2013 MAGNUM TRAILER GENERATOR TRAILER (A50854)
2013 MAGNUM...
Massey Ferguson 65 Loader Tractor (A50514)
Massey Ferguson 65...
 
Top