KYErik
Platinum Member
- Joined
- Dec 2, 2005
- Messages
- 904
- Location
- South central IL
- Tractor
- 1977 AC 7000, 1980 JD 2840, 1963 Case 930, 1963 Ford 4000, 1943 Case SC, Case 530CK backhoe
I have a problem goat.
It has been testing the 6" square field fence and has discovered that if it pushes the bottom of the fence up in a low spot, it can wiggle its way under the fence on its belly. I have several low spots along the perimeter of the pasture, so it would be a big job to fill them all in.
The goat also has an intermittent issue with putting its face and horns through the fence so it can eat grass on the other side, and then not being able to get its horns back through so I have to "help" it get out about once every 1-2 months.
I tipped the goat's horns several years ago, so now they are about 10 inches long and curved backwards.
My idea is to connect a forward facing "hook" to each horn so that whether he tries to slide under the fence or even if he tries to stick his head through the 6 inch holes in the fence, the forward facing hooks will catch on the wire and stop him.
I was going to slide a 1 inch PVC pipe over the top 4 inches of each horn and then put a 90 degree fitting and another short pipe facing forward, but the horns have an oval shape in cross section so the pipe won't fit very snugly. Any ideas?
I would use a low electrified wire, but the horse shares this pasture (he and the goat are friends) and I am afraid he will step on the wire and get tangled).
It has been testing the 6" square field fence and has discovered that if it pushes the bottom of the fence up in a low spot, it can wiggle its way under the fence on its belly. I have several low spots along the perimeter of the pasture, so it would be a big job to fill them all in.
The goat also has an intermittent issue with putting its face and horns through the fence so it can eat grass on the other side, and then not being able to get its horns back through so I have to "help" it get out about once every 1-2 months.
I tipped the goat's horns several years ago, so now they are about 10 inches long and curved backwards.
My idea is to connect a forward facing "hook" to each horn so that whether he tries to slide under the fence or even if he tries to stick his head through the 6 inch holes in the fence, the forward facing hooks will catch on the wire and stop him.
I was going to slide a 1 inch PVC pipe over the top 4 inches of each horn and then put a 90 degree fitting and another short pipe facing forward, but the horns have an oval shape in cross section so the pipe won't fit very snugly. Any ideas?
I would use a low electrified wire, but the horse shares this pasture (he and the goat are friends) and I am afraid he will step on the wire and get tangled).