B7800 engine injector setting

[rswyan]

Thanks guys.

The reason I asked is that I have the same engine as orezok ... and if it happened on his, it could very well happen on mine ...

 

[orezok]

Thanks guys.

The reason I asked is that I have the same engine as orezok ... and if it happened on his, it could very well happen on mine ...

Just take a 10mm wrench and make sure the jamb nut it tight.

 

[leonz]

Yes, I found a site that has the full regime for setting up the injector pump. It takes a test stand with specialized equipment that measures the exact output of the pump. ...but the adjustor screw is on the outside of the pump so dirt doesn't matter and it is working just fine with "Farmer Tight" adjustment.

Would I attempt to rebuild the pump, heck no! This is just a simple adjustment for the max flow on the governor.

==============================================================================


Call Foley Engine Service www.foleyengine.com



They can help you if you do not have a kubota dealer nearby.

 

[rswyan]

Just take a 10mm wrench and make sure the jamb nut it tight.

Yup ... will definitely check it :thumbsup: