Bent pins: fix or replace?

   / Bent pins: fix or replace? #11  
why did the pins get bent in the first place? Might want to figure out the cause prior to investing in new.
 
   / Bent pins: fix or replace? #12  
I have mine bent, hit it with the hammer a couple of times and all good now. Don't overthink it, they are soft for a reason. You don't need a press
 
   / Bent pins: fix or replace? #13  
I always want the easiest to replace, cheapest, part to break first. I would think that pin is very easy to find and rather inexpensive to buy.
 
   / Bent pins: fix or replace?
  • Thread Starter
#14  
I can’t find these same pin sizes to save my life!

BY300-240001 - 25mm dia X 90mm long (~1” x 3-1/2”)
BY400-440000 - 20mm dia X 215mm long (~3/4” x 8-1/2”)

There seems to be every size in these diameters except what I need.

Dealer came back with $126. 😮

Without a press, I have this redneck idea to carefully use my log splitter with some blocking. I’ll let you guys know how it goes!
 
   / Bent pins: fix or replace? #16  
My tactic on this is the same for all my part alteration experiences. I buy new ONCE, then fix, or have fixed the broken or bent part(s). So, I pay for the crime and have a replacement on-hand when needed ASAP. I do learn the lessons, though, too.
 
   / Bent pins: fix or replace? #17  
Dealer came back with $126. 😮

Without a press, I have this redneck idea to carefully use my log splitter with some blocking. I’ll let you guys know how it goes!
Have you tried a hammer? Works better than breaking your splitter
 
   / Bent pins: fix or replace? #19  
Why not just buy a stick of the correct diameter drill rod (which will come polished) and cut to length and be done with it. Should be a whole lot cheaper,
 
   / Bent pins: fix or replace? #20  
Why not just buy a stick of the correct diameter drill rod (which will come polished) and cut to length and be done with it. Should be a whole lot cheaper,
Drill rod will work-harden and break instead of bend.
 

Tractor & Equipment Auctions

TOYOTA 7FGCU25 LP SIT DOWN FORKLIFT (A50854)
TOYOTA 7FGCU25 LP...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A50322)
2025 Kivel 48in...
1268 (A50490)
1268 (A50490)
John Deere 772B Articulated Motor Grader (A49461)
John Deere 772B...
12-Wheel Pneumatic Pull-Behind Asphalt Compactor (A49461)
12-Wheel Pneumatic...
Non running toro mower (A48082)
Non running toro...
 
Top