Front-End Loader Best SSQA trailer mover attachment?

[Smokeydog]

Need one to buy or build.

 

[nyone]

Weld a 2in reciever right on the cross bar between the latch boxes.
A $7 part with some welding needed.

 

[tomplum]

I just welded a hitch receiver tube on the center of my bucket. Then made a lowering bracket out of a piece of channel with a ball on it. Also have a fixed hook and an extended arm with a chain if I have to get up inside something to chain up and pull out.

 

[M59]

I have been using the CL Fab SSQA quick hitch for last 3-4 years to move trailers, including partially loaded at approx 6-7K Lbs, around the work space. Also has storage for different sized balls.

 

[Tinhack]

My SSQA pallet forks frame came with a 2" hitch receiver mounted to it.

 

[Xfaxman]

I used square U bolts and put a receiver hitch on the brush fork frame:

The view from the seat:

Moving the trailer:

 

[alexpops]

https://www.tractorsupply.com/tsc/product/county-line-trailer-mover?cm_vc=-10005

Not SSQA, but 3pt. With fab skills, you could make an SSQA/3PT adapter & have best of both worlds.

or this if no fab skills

Amazon.com

 

[true temper]

One I built, you can see what you are doing very well. The only thing I am going to change is put a small dozer blade on the bottom.

 

[deezler]

I do like that CL-fab option, but $575 plus shipping is a bit much for simply hanging a trailer ball.

I'm strongly considering this option from Titan.

https://www.palletforks.com/skid-steers/adapter-and-mounting-plates/receiver-mount-plate-attachment-v2/169101.html

 

[BackRoad]

Simply welding a 2" receiver on the top edge of the bucket is making more and more cents to me...