3-Point Hitch Bouncing 3Point - Jinma 354

[cnsJohn]

I changed the hydraulic fluid and filter on my 354; now the 3pt bounces. The arms drop a few inches and the bounce back up to their set position. Any ideas for a fix?

Your insight and experience are greatly appreciated.

JohnJ

 

[CCWKen]

Have you run it through several full cycles to purge any air in the system? Be sure to recheck fluid level afterword also.

Note: The only way you'll get a full cycle is to remove any implement and force the arms all the way down.

 

[cnsJohn]

Thanks. I'm fixing to climb on it in a minute. I'll give it some cycles.

Thanks again for the suggestion.

 

[cnsJohn]

CCWKen,

Seems no amount of lift arm cycling, without or with implement, has solved the bouncing issue. Any thoughts as to what else might be causing the problem?