Bucket hooks

   / Bucket hooks #31  
At age 76, thinking I had heard it all, my vocabulary fails me... please tell us, Industrial, what is "mangling of a jerk?" My temptation at amateur humor is about to burst...

:rotfl::number1::hyper::applause::shhh::censored: I thought I was the only one who's imagination began racing while trying to visualize the incident.
 
   / Bucket hooks #32  
Amen brother blkqi. In spite of OSHA, butt covering companies, the lawyers in the room, and the self-righteous protectors of us all, I'd bet that a majority of private individual tractor owners have chain hooks either welded on or bolted on to their buckets. Why? Because it is extremely useful and any fool doing more with their tractor than mowing grass knows it.

Dang right -- and it's a lot cheaper than adding a full fledged grapple to the bucket as well. Interestingly enough the bucket that came with my Kubota actually had a lip on the back of the bucket which has served as an impromptu place to hook a chain a time or two. Not quite as nice as having hooks on the bucket, but it's worked for retaining lighter stuff.

In some ways it seems the biggest downside to all the safety features built into modern products is that so many user's seemingly proceed to disengage their brains and assume they'll be "safe" no matter what they do. Personally I'm of the opinion that it's safer to do something risky that you've actually thought through and determined a suitably safe way of doing it, than just going about doing things relying on safety features that were designed/built by someone who's not there.

Call me old fashion, but I prefer my safety to ultimately be my responsibility and while I may appreciate the assistance I'm not going to hand off that responsibility. ...seen/heard enough where people were blindly pushing things for "safety" reasons that would have increased the danger/risks because of something unique to the situation.
 
   / Bucket hooks #33  
The Jerk managed to mangle himself other ways, I assure you. Yes it was a ZERK, but those can often be Jerks too.
 
   / Bucket hooks #34  
I hope you don't mind if I steal the phrase I. T. . I plan on applying it to a guy I know that always trys throwing gravel in the gears when someone is onto a good idea.
 
   / Bucket hooks #35  
Works best if the gears are nice and greasy.

Trust me. No such thing as a good idea. Just some things tht actually turned out well, in the end.

I put hooks on my loader bucket a quarter of a century ago. And I guess, that idea was had long before I was born.

AND, I do stuff like this: DSC04625.JPG
Everything using common sense.

Not sure how to get rid of the image below.
 

Attachments

  • DSC04425.JPG
    DSC04425.JPG
    1.4 MB · Views: 127
Last edited:
   / Bucket hooks #36  
Just a D ring inside the upper part of the bucket. Top of the Massey bucket has a lip that could be used for light work.
 
   / Bucket hooks #37  
My dealer has welded hooks on both buckets, 1 in the center, prior to delivery. For free!
 
   / Bucket hooks #38  
Works best if the gears are nice and greasy.

Trust me. No such thing as a good idea. Just some things tht actually turned out well, in the end.

I put hooks on my loader bucket a quarter of a century ago. And I guess, that idea was had long before I was born.

AND, I do stuff like this: View attachment 604718
Everything using common sense.

Not sure how to get rid of the image below.

Is that 4 satellites in the background? Free service :laughing:
 
   / Bucket hooks #39  
Here’s what I did to mine a couple years ago. Welded a 3/4” thick flat plate to the top for support. The clevis can be installed backwards and is out of the way. I use it for chaining tractor to trailer mostly.
IMG_6894.jpg
IMG_6893.jpg
IMG_6892.jpg
 
   / Bucket hooks #40  
Wow, I did not know tow hooks are such a bad idea, ha.........

So I know our tractors can hurt/kill you, but I was unaware of the dangerous tow hook.......

I guess I have been guilty for about 9 years, of installing 2 bolt on HF Tow Hooks on the top of each side of the loader bucket, and 1 bolt on HF Tow Hook installed high on the backside of the Backhoe Bucket.

I also installed a HF bolt on Step Bumper Receiver in between the loader bucket tow hooks that has a pinned slide in receiver with a large D-Ring Shackle attached out the front of it.

They sure make things a little more easy from time to time and are very handy indeed......

I will be extra careful in the future while using my tow hooks?

KC
 

Tractor & Equipment Auctions

2018 Peterbilt 567 Galbreath AF-OR-174 T/A Roll Off Truck (A45336)
2018 Peterbilt 567...
TEST THE BID BUTTON (A49251)
TEST THE BID...
2015 Chevrolet Silverado 1500 4x4 Crew Cab Pickup Truck (A46684)
2015 Chevrolet...
2025 78in Dual Cylinder Hydraulic Grapple Rake Skid Steer Attachment (A46683)
2025 78in Dual...
NEW Wolverine Skid Steer Tiller (A48289)
NEW Wolverine Skid...
2021 John Deere 700K XLT Crawler Tractor Dozer (A45336)
2021 John Deere...
 
Top