Bucket level indicator

   / Bucket level indicator #1  

Mtsoxfan

Platinum Member
Joined
Nov 19, 2021
Messages
922
Location
Newark Vermont
Tractor
Kioti 3520SEH Holland TC29D
I have a New Holland TC29D. My loader has the level indicator tube, but nothing attached to bucket. Does anyone have a similar model that can post a picture of setup?
Thanks...
 
   / Bucket level indicator #2  

Parts breakdown of the 15LA loader but doesn't show a bucket level indicator.

Edit: Same thing for the 14LA:


I had a TC29DA at one time but the loader was SSQA. Don't recall whether or not it had a bucket level indicator. P.S. Someone will come along and say you don't need a bucket level indicator. Pay no attention. :)
 
   / Bucket level indicator
  • Thread Starter
#3  
on my Yanmar, I knew the bucket level without using an indicator. Just cant seem to get the NH right.
 
   / Bucket level indicator #4  
Not sure about NH but if you have a tube, a lot of these will have a rod that slips inside and is adjustable so that it's either flush with the tube or something else do distinguish level.
Pictures are a kubota version.
20220412_094906.jpg

20220412_094856.jpg
A little studying of what you have and you should come up with something.
 
   / Bucket level indicator #5  
Quite a few threads on bucket level indicators....




Search feature using "bucket level indicator" will reveal many more...
 
   / Bucket level indicator
  • Thread Starter
#6  
Thanks. The indicator you made looks impressive. Since I have the factory tube, I was just looking for how to hook up a rod. I'll try to figure something out, maybe a NH owner will post a picture before I do...
 
   / Bucket level indicator #8  
I have a New Holland TC29D. My loader has the level indicator tube, but nothing attached to bucket. Does anyone have a similar model that can post a picture of setup?
Thanks...
Mine on my TC45 looks like in this video.
 
   / Bucket level indicator #9  
I sold the tractor but these are the best pics I have. I think the rod went down and fastened into a hole in the bucket just above the cylinder pin.

TC33D 010_1.JPG
TC33D 011_1.JPG
TC33D 012_1.JPG
 
   / Bucket level indicator #10  
Rod just needs to be a few (2-5) inches above pin so as bucket rotates around pin, the rod connecting point rotates in a arc to push/pull rod up/down in tube....Just make sure rod is long enough it does not pull out of tube when bucket is in full downward rotation...
 

Tractor & Equipment Auctions

2005 JOHN DEERE 310G BACKHOE (A50458)
2005 JOHN DEERE...
Craftsman Pull Type Seeder for Lawnmower (A48837)
Craftsman Pull...
377811 (A48836)
377811 (A48836)
2022 GTS FS35-G2 Flex Draper Header (A50657)
2022 GTS FS35-G2...
(1) 12ft Livestock Panel with 4ft Walk Through Gate (A48837)
(1) 12ft Livestock...
2008 CATERPILLAR 320D L (A50854)
2008 CATERPILLAR...
 
Top