BX24 nameplate

[Tractor Nut]

Todd,
Thanks for the information, that will make things much easier and increase my level of confidence with the purchase.
TN

 

[lp333]

... Items 5 & 6 are campaign items are factory addressed if number is above these: BX24 -step stay >55996 Seat stopper >56846 ...

Thank you 66gladiator for your valuable post. It would be great if more Kubota dealers were as informed and as helpful as you are.

If I understand you correctly:

1) All BX24 tractors after serial # 55996 have the step stay kit installed, and

2) All BX24 tractors after serial # 56846 have both the step stay kit and the seat stopper installed.

Is it correct to assume that there is a serial number after which all BX24 tractors would have the new improved plastic fenders installed please? If that happens to be the case, would it be possible for you to provide that serial number please?

 

[Tractor Nut]

Todd,
As mentioned your post is extremely helpful and much appreciated.
What is the serial number cut off that would define a 2006 BX24 from a 2007 model?
Thanks,
TN

 

[mswlogo]

If ordering a new BX24 today (on the lot from messicks who has good turnover) which items may have not been applied yet to a new machine that I might want to watch for?

 

[lp333]

If ordering a new BX24 today... which items may have not been applied yet ... ?

Pending further clarification from 66gladiator, may I suggest that you print the above list and bring it with you the next time you visit the dealer. Ask him to show you exactly how each point in that list was addressed on the specific tractor that you intend to buy; in the process, how about asking him for the serial numbers relating to each fix? Then kindly post the replies here for the benefit of your fellow kubotans?

 

[66gladiator]

No year info from serial numbers, year model determined by when the tractor is sold, or when a new series/sub-series is introduced.

 

[Jimmyp5]

I have had the deck on my BX 24 replaced twice in a year...under warranty, the step broke on both sides... I now wonder if the dealer installed the new brackets or just the new deck., is their a part number on the bracket I can check? old vs new?

Guess it is time to buy a parts and service manual...have had the BX 24 for almost a full year now.

 

[lp333]

... I now wonder if the dealer installed the new brackets or just the new deck., is their a part number on the bracket I can check?...

Check your invoice to see if it mentions part # K2592-9554-0. Believe it or not, some dealers will only install one bracket (on the left underside of the deck) rather than two, because they don't see many breaks on the right side.

 

[Singlecoil]

I have had the deck on my BX 24 replaced twice in a year...under warranty, the step broke on both sides... I now wonder if the dealer installed the new brackets or just the new deck., is their a part number on the bracket I can check? old vs new?

Guess it is time to buy a parts and service manual...have had the BX 24 for almost a full year now.

You can see the step kit in the following picture. One side has a large plate and the other side has a smaller bracket.

 

[lp333]

You can see the step kit in the following picture. One side has a large plate and the other side has a smaller bracket...

Single, this is just about as clear as it gets. I would like to extend a challenge to all other Kubota owners here at TBN to come up with an even more ingenious or creative way to illstrate a warranty repair on their BX.