BX24 Toolbox

[Deano]

Has anyone mounted a toolbox to their BX24?? I only want to store a couple screw drivers, crescent wrench etc. to adjust top link or whatever.
If you have, how about a picture and where you got the box.

Thanks,
Dean

 

[thavil]

BXPanded sells exactly what you are looking for. It's a bag that mounts to the back of your seat. BXpanded.com

 

[Volfandt]

An oldie but still works fine, even on the upgraded seat.
http://www.tractorbynet.com/forums/kubota-owning-operating/51099-bx23-toolbox-project.html

 

[BX2230Dude]

If all you want to carry is a few screwdrivers and wrenches you could try a tool basket instead of a tool box.

From 2004:http://www.tractorbynet.com/forums/kubota-owning-operating/42909-tool-basket-bx2230-fel.html

 

[MyKubota]

I know its worthless without pictures but I'll try to explain and get a photo or two. I took a 3" x 12" long piece of PVC with an end cap on one side and a female adapter on the other. I used two electrical cowboy clamps (mineralacs or Mae West's) attached to two 1/4" beam clamps and attached it to the non-moving left upright for the FEL just above your left foot and on the inboard side. Drill a drain hole in the bottom and thread a plug into the female adapter on the top. Unscrew the top and drop in your tools, clips, gloves, etc. I would have used 4" had the 3" not been laying around. So far so good, and since I dont plan on removing the FEL it should be there for some time to come.

 

[radioman]

Try using PVC with endcaps. I was able to add it to the FEL. If you look on the FEL upright arms, you will see a hole already predrilled there. I just drilled a same size hole through the bottom endcap and pvc pipe. Just add top endcap to keep the rain out and tools inside from the bumpy rides. I thought it was pretty nifty for toolbox on BX. I probably will end up painting it orange this winter to match. The only downside to this tool box is that its mounted on the FEL and it won't do you any good if you removed FEL and need the tools. At this point the BXpanded bag is looking good, but i dont like bags. I prefer somthing solid.

 

[radair]

I put an ammo box in place of the left side handle. Works great and is out of the way. Here's a link to the thread: http://www.tractorbynet.com/forums/customization/72503-another-bx-tool-box.html

 

[radioman]

I put an ammo box in place of the left side handle. Works great and is out of the way. Here's a link to the thread: http://www.tractorbynet.com/forums/customization/72503-another-bx-tool-box.html

I thought about that , But I didnt like the fact I would lose the handle function.

 

[Deano]

Thank you everyone who responded. This is exactly what I was looking for. Now I have a few great ideas to look at. One of these will work for me. Some ideas I did not even think of, like removing the handle and I did not even notice the arm rest bolt holes!!

Dean

 

[radioman]

After you decide which way you go, please post your own pics to show us what you did and what revisions you made if any. Just like one TBN member said, After you do things one way , there is always another way.