Loader BX25 Loader bucket position while using backhoe?

   / BX25 Loader bucket position while using backhoe? #21  
I have been running backhoes for 30 yrs . Union operator , #841 local . If you are dragging the hoe you need to work on technique . You drop the loader bucket to keep the machine stable . The front axle has a pivot . Try loading a tandem with the bucket up and the x hoe extended and you will understand . Do you think a real operator writes those books ? Yes you pick it up off the tires . When loading trucks they may be fully extended . You are a good bunch of people , but not an operator in the thread that I have seen . Kevin .
 
   / BX25 Loader bucket position while using backhoe? #22  
I Angle my FEL to about 30ish degrees and put the blade in the ground a bit 1" or so. I do lift the rear tires about an 1" or so off the ground and use the stabilizers to level it. Never had a problem doing it this way---Guess it's my motto--"right way, wrong way and my way" :eek:
 

Tractor & Equipment Auctions

2019 Ford F-450 4x4 Crew Cab Gooseneck Utility Flatbed Truck (A49461)
2019 Ford F-450...
2021 Ver-Mac PCMS-3812 Solar S/A Towable Trailer Message Board (A49461)
2021 Ver-Mac...
2004 Ford F-250 4x4 Crew Cab Mechanic Service Truck (A49461)
2004 Ford F-250...
2017 Bad Boy Outlaw XP 61in Zero Turn Mower (A48082)
2017 Bad Boy...
2018 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A51222)
2018 FREIGHTLINER...
2019 CATERPILLAR 299D2 XHP SKID STEER (A51242)
2019 CATERPILLAR...
 
Top