Chain Guards

   / Chain Guards #41  
It's a lot more chipped from shipping damage and sitting around at the TSC than the pictures show.. I think all the surfaces of the chain and the reflections were playing havoc with the digital camera. Those were the only two shots I took that didn't come out totally blurry.
 
   / Chain Guards #42  
Thanks, and I tend to agree with the vibrations bit.. Just about when I was done tightening things I thought to myself "Why didn't I loctite all that?".. So maybe I'll take the rear apart and fix that tomorrow before I build the front.. If that doesn't hold it together once I get to use it, I'll have to come up with Plan B.
 
   / Chain Guards #43  
Just a suggestion.You might want to consider nylon locknuts, even locktite can be affected by vibration.
 
   / Chain Guards #44  
David

Yes sensational job indeed. I wish I had thought of that when I got ripped off making mine.

Cheers
 
   / Chain Guards #45  
The finished product..

Just finished the guards off. Ended up loctiting everything, including the already finished rear. :) Also decided to double up the nuts on the bolts that hold the angle iron to the deck in addition. So here's 4 pictures in case anyone is curious.. The front came out even better, I think.

This picture is the front, overall.
 

Attachments

  • 53-153857-DSCN1003.JPG
    53-153857-DSCN1003.JPG
    67.9 KB · Views: 321
   / Chain Guards #46  
Re: The finished product..

Here's a closer up shot.
 

Attachments

  • 53-153858-DSCN1004.JPG
    53-153858-DSCN1004.JPG
    67.8 KB · Views: 272
   / Chain Guards #47  
Re: The finished product..

Here's a close up shot of the back side of the guards..
 

Attachments

  • 53-153859-DSCN1005.JPG
    53-153859-DSCN1005.JPG
    38.7 KB · Views: 259
   / Chain Guards #48  
Re: The finished product..

..and finally, a shot from below. I used 1.25x2.25" angle iron so I'd have more room to mount it to the deck.

Now all I need to do is wait a couple weeks so I can brush hog our new land. :)
 

Attachments

  • 53-153860-DSCN1006.JPG
    53-153860-DSCN1006.JPG
    42.9 KB · Views: 271
   / Chain Guards
  • Thread Starter
#49  
Re: The finished product..

I have the feeling I'm about to ask a dumb question but I can't figure it out, so.... Why are the middle group of chains shorter on the front guard?
 
   / Chain Guards #50  
Re: The finished product..

<font color=blue>about to ask a dumb question</font color=blue>

Not too dumb./w3tcompact/icons/laugh.gif The first time I made a chain guard, I made'em all the same length, and as they drug over grass and weeds that pushed them back under the deck, the blades shortened'em for me./w3tcompact/icons/shocked.gif/w3tcompact/icons/laugh.gif
 

Tractor & Equipment Auctions

Kubota M5-111 (A53317)
Kubota M5-111 (A53317)
(INOP) 2019 KUBOTA SVL 95-2S SKID STEER (A52707)
(INOP) 2019 KUBOTA...
Bush Hog 3pt 14' Mower (A53317)
Bush Hog 3pt 14'...
2017 INTERNATIONAL 4300 21FT BOX TRUCK (A57880)
2017 INTERNATIONAL...
Toro Zero Turn Lawn Mower (A56859)
Toro Zero Turn...
WHISPERWATT 220 DIESEL POWERED GENERATOR (A55745)
WHISPERWATT 220...
 
Top