Chain Guards

   / Chain Guards #41  
It's a lot more chipped from shipping damage and sitting around at the TSC than the pictures show.. I think all the surfaces of the chain and the reflections were playing havoc with the digital camera. Those were the only two shots I took that didn't come out totally blurry.
 
   / Chain Guards #42  
Thanks, and I tend to agree with the vibrations bit.. Just about when I was done tightening things I thought to myself "Why didn't I loctite all that?".. So maybe I'll take the rear apart and fix that tomorrow before I build the front.. If that doesn't hold it together once I get to use it, I'll have to come up with Plan B.
 
   / Chain Guards #43  
Just a suggestion.You might want to consider nylon locknuts, even locktite can be affected by vibration.
 
   / Chain Guards #44  
David

Yes sensational job indeed. I wish I had thought of that when I got ripped off making mine.

Cheers
 
   / Chain Guards #45  
The finished product..

Just finished the guards off. Ended up loctiting everything, including the already finished rear. :) Also decided to double up the nuts on the bolts that hold the angle iron to the deck in addition. So here's 4 pictures in case anyone is curious.. The front came out even better, I think.

This picture is the front, overall.
 

Attachments

  • 53-153857-DSCN1003.JPG
    53-153857-DSCN1003.JPG
    67.9 KB · Views: 314
   / Chain Guards #46  
Re: The finished product..

Here's a closer up shot.
 

Attachments

  • 53-153858-DSCN1004.JPG
    53-153858-DSCN1004.JPG
    67.8 KB · Views: 268
   / Chain Guards #47  
Re: The finished product..

Here's a close up shot of the back side of the guards..
 

Attachments

  • 53-153859-DSCN1005.JPG
    53-153859-DSCN1005.JPG
    38.7 KB · Views: 252
   / Chain Guards #48  
Re: The finished product..

..and finally, a shot from below. I used 1.25x2.25" angle iron so I'd have more room to mount it to the deck.

Now all I need to do is wait a couple weeks so I can brush hog our new land. :)
 

Attachments

  • 53-153860-DSCN1006.JPG
    53-153860-DSCN1006.JPG
    42.9 KB · Views: 264
   / Chain Guards
  • Thread Starter
#49  
Re: The finished product..

I have the feeling I'm about to ask a dumb question but I can't figure it out, so.... Why are the middle group of chains shorter on the front guard?
 
   / Chain Guards #50  
Re: The finished product..

<font color=blue>about to ask a dumb question</font color=blue>

Not too dumb./w3tcompact/icons/laugh.gif The first time I made a chain guard, I made'em all the same length, and as they drug over grass and weeds that pushed them back under the deck, the blades shortened'em for me./w3tcompact/icons/shocked.gif/w3tcompact/icons/laugh.gif
 

Tractor & Equipment Auctions

John Deere 336 Square Baler (A46502)
John Deere 336...
2101 (A46502)
2101 (A46502)
2018 Bobcat T770 (A47307)
2018 Bobcat T770...
2019 Freightliner TMA (A45336)
2019 Freightliner...
2016 Quincy QSI-370i Rotary Screw Air Compressor (A46683)
2016 Quincy...
1994 Chevrolet Silverado K2500 4x4 Pickup (A49339)
1994 Chevrolet...
 
Top