chainsaw decision time

[peterc38]

I think a 50 cc saw is too small for your described use of several trees over 30" and feeding a wood furnace.

If you are only going to have one saw, IMO you need a 60cc minimum.

I still agree w/ LD1 for bang for your buck you can't beat the Makita from Baileys.

Otherwise, pony up a little more dough for an MS361 or 372XP.

 

[20 20]

Out of the choices you gave I'd go with the stihl ms 290 I have a 310 and a 250 great saws. I use mine for more then just firewood I also have a small mill, so my saws are used A LOT. If you do want a little better bang for your buck go with the 361 pro saw. A 290 will handle the trees you mentioned, I've cut bigger{even with the 250}. Are you going to mill them or just buck them up? Another thing to think about is bar size, to big a bar and the saw is a pig. I use 16" on mine and they cut like beavers on steriods. A longer bar is handy when it comes into limbing but for firewood I would not worry about that.

 

[newbury]

we're going to be burning wood here starting next winter, so i will be doing alot of cutting for the furnace. also, i have about 8 monster pines in the yard that need to get out of here. im talking at least 6 stories tall and with trunks probably over 30 inches. theyre 80 years old and need to leave before they fall on something. i know the dolmar is a pro saw and the others are landowner saws, but craftsman titles one of theirs a pro saw, but id hesitate to put it with the husky and stihl pro saws. i was going on a budget. id really like to stay under 400$, but the dolmar doesnt exceed that by much. my other option is ive found a stihl 036 pro on cl for 250 and im strongly considering that, but im afraid of getting something used. who knows what kind of life its had. im told an old farmer owned it, but people will tell you anything. mostly, i want something that will have the oomph to go through some big stuff at a decent pace but not be too heavy to use. the 455 is about as heavy as i want to go. another thing is, i dont like to replace things. i want something that is going to be around awhile, otherwise id spend 150$ on a craftsman and call it done.

With those "monster" pines you should do "mission creep" and look into getting a chainsaw miil like the Alaskan Mark III. With a Stihl 460 class saw you could get enough lumber to build a barn.
Look on ebay for QUALITY sellers who only sell saws. I got what seems to be a good Stihl 660 for about $550.

 

[killdozerd11]

Buy the Stihl....... Luke :laughing:

Good friend of mine who had a lot of years in the lumber industry then retired to doing sales always told buy the Stihl and you will never be sorry :thumbsup:

But like all things tool ........maintenance is a key factor :thumbsup:
When your done using any 2 cycle equipment empty the fuel tank and run till it dies the biggest problem is gummed carbs :ashamed:

 

[wildwillie]

Stihl or Husky are the only saws you see up here and we got lots of trees.
My Stihl 036 is some 12 years old and never had any problems. Just run it out of fuel when your done with it.I bought it because that's what most loggers use.

 

[highboy1975]

the ms361 is a really nice saw, but way out of my price range. as far as the pines go, thats the only time ill be cutting that big, and i just want to drop, limb, and cut them up to burn in my outdoor pit or most likely just toss in the ditch. i have 3 stihl service shops nearby, a dolmar shop, and the place selling dolmars is the one clearancing the huskys. the stihl shop i drive past daily, and the place with the dolmars and husky i drive past every couple days. both are pretty convenient for me. im waiting on the guy with the 036pro to get back to me with the compression numbers, and i think the husky is sounding really good for the price.

 

[galen1115]

I bought the last Stihl MS360 my dealer had. They replaced it with a saw that doesn't perform as well. lf you can still find one, I suggest buying it.

 

[SensibleNick]

Another Vote for Stihl. :thumbsup:

My brother is an arborist/tree surgeon and runs 3 stihls daily. He has yet to meet another guy in his trade who uses anything else.

Having said that... I run a husky from '89 and it's faultless.

 

[wampum]

The 5100 is only 2.4 lbs lighter than a 6400-7900. 11.2lbs cs 13.6 lbs

For about $80-$100 more than the 5100, and a only 2.4lbs heavier, I'd take the 4.8HP 6400 over the 3.8HP 5100. And as I mentioned earlier, the upgradability of the 6400.

Your numbers are not real world numbers. The 5100 power head is 11.2,
oil wt.is 9 oz.,gas wt. is 15.6 which makes the Power Head loaded 12.5 pounds. The 6400 is 13.6 pounds,oil 13.6 oz. ,gas 25.4 oz. ,which makes the loaded power head 16.96 pounds. Just for fun I weighed my 7900 loaded with a bar and chain and it was right at 20 pounds. Bailey's told me a good bar and chain (20 inch) for the 6400 would be 3 and 1/2 pounds,and shipping would be $20.00 to here in Pa. Which makes the actual running weight of the 6400 at 20 pounds give or take a couple ozs. The 5100 with an 18 inch bar and chain would be under 3 pounds,which would make weigh about 15 pounds,5 pounds less then the 6400. These are 2 totally different saws,the 5100 is for limbing and general firewood cutting. The 6400 can be used the same but the extra weight of 5 actual pounds difference would make it a lot more saw to lug around,for firewood cutting.

 

[arrow]

If you are not used to dropping trees, I would not look at dropping a 30" tree without some expertise. If you would like to reduce headaches and you plan on burning wood for some time in the future, get a pro saw. Husky and Stihl make junk as well as excellent saws. I feel you are under budgeting yourself especially if you plan eventually dealing with larger timber. A 20" bar even on something such as Husky 357 is at the max. Everyone has cheapened up their saws over the years so why start off with a disadvantage of buying a homeowners version of an already cheapened saw? The last thing you want is a saw wimping out on you as you are making the felling cut. If you are taking down trees, an occasional use built chainsaw is an oxymoron to me.