After having the bh off for about 2 weeks, when I hooked it back up the a+b seletor will not stay in the selection a or b. It springs back to the netral pos. Now if you hold it in the b selection the hydrolics work for the bh. with no bogging or anything. not sure what that is. Also my fel is leaking hydro fluid from the brass colored fitting or elbo on right side fel. Any Ideas??
ck20 problems
- Thread starter jtpilch
- Start date
- Views: 910
MichiganIron
Silver Member, Advertiser
- Joined
- May 12, 2008
- Messages
- 833
- Location
- Central Michigan
- Tractor
- Full line of KIOTI Tractors, BEFCO and Worksaver Implements
The rear hydraulic valve has a detent body on the valve. It sounds like the detent spring is bad.
The loader leak sounds like a loose fitting.
Contact your dealer about both issues.
The loader leak sounds like a loose fitting.
Contact your dealer about both issues.
