confirmation on hookup of wires to regulator

[Forester Massey]

I wanted to get confirmation about the hookup to my regulator for my 135 gas. The red with white stripe wire on the left is from my generator and goes to regulator "F". There are two wires hooked in the middle. One is grey wire from key switch to regulator "L". Other is yellow/black wire from key switch to regulator "BAT". The last wire on right has a fuse on wire but was not attached to anything. Lastly, there is a black wire behind regulator from generator.

Any help appreciated.

 

[MasseyWV]

Do you know which model of generator you have?

I recently posted a thread with tons of information about Delco-Remy generators and voltage regulators, complete with wiring diagrams, testing procedures, and more.

http://www.tractorbynet.com/forums/...delco-remy-generators-voltage-regulators.html

In addition, here's a basic wiring diagram for Massey Ferguson 135 tractors with the Continental Z-series gasoline engine. On the wiring diagram, the voltage regulator is part number 8, and the generator is part number 9.

 

[murphy1244]

16 gauge red goes to fuel gauge,14 gauge lt blue goes to generator,12 gauge red to gen which is also spliced to key switch,14 gauge grey to gen. Never mind I see you got something better.