OP
nisaacs
Platinum Member
- Joined
- Mar 9, 2020
- Messages
- 833
- Location
- Snowflake, Arizona
- Tractor
- 970 John Deere 4x2, 970 John Deere 4x4, 4320 John Deere, 995 Case/IH
Finished, I changed out two short pieces with some salvage deck boards from the other trailer. Note the tools required for that little job, 
Took it for a test pull with a small load of hay, pulls good. If I had a bigger truck, I would keep it. For you guys that want to tow 9-10k lbs with a half ton, this is what 9k looks like. Note the fender well gap, front to rear, I am level, so my hitch weight is maxed out. '21 Ram 2500 with air bags.
Took it for a test pull with a small load of hay, pulls good. If I had a bigger truck, I would keep it. For you guys that want to tow 9-10k lbs with a half ton, this is what 9k looks like. Note the fender well gap, front to rear, I am level, so my hitch weight is maxed out. '21 Ram 2500 with air bags.
