Engine oil in my Hydaulics

   / Engine oil in my Hydaulics #1  

steeevo

New member
Joined
May 23, 2022
Messages
5
Location
plymouth maine
Tractor
2001 kubota bx1880
HELLO<, I have a 2003 kubota 1800 bx, deisel, I did a bonehead thing today, I put a qt of engine oil in my hydaulic tank. Will it be o.k if I just change the hydraulic fluid and filter, I did run it for 2-3 minutes after I added the engine oil,, (stupid).. I was told that motor oil won't hurt it. Is this true? ANYBODY??
 
   / Engine oil in my Hydaulics #2  
Likely ok as is. But changing filter and fluid won’t hurt anything other than your wallet.
 
   / Engine oil in my Hydaulics #3  
A quart is nothing in whatever many gallons the tractors holds. It won't hurt a thing.
 
   / Engine oil in my Hydaulics #4  
I wouldn’t even change the fluid. A quart is pretty low dilution in the hydraulic system and motor oil wouldn’t hurt the hydraulics anyway.
 
   / Engine oil in my Hydaulics #5  
I would not worry about it at all. Some machines use motor oil instead of hydraulic oil. Motor oil is a better grade of oil. Hydraulic oil is cheaper.
 
   / Engine oil in my Hydaulics #6  
I would not worry about it at all. Some machines use motor oil instead of hydraulic oil. Motor oil is a better grade of oil. Hydraulic oil is cheaper.

The OP’s machine is a Kubota BX1800 has both wet brakes and an HST. The recommended fluid is Kubota UDT or Super UDT. They are not a cheaper grade of oil.
 
   / Engine oil in my Hydaulics #7  
It only costs more because Kubota oil doesn't foam. Which doesn't matter on a tractor. Now, a skid steer with a mulcher and high flow hydraulics is a different story. It needs a non foaming fluid.
 
   / Engine oil in my Hydaulics #8  
It only costs more because Kubota oil doesn't foam. Which doesn't matter on a tractor. Now, a skid steer with a mulcher and high flow hydraulics is a different story. It needs a non foaming fluid.

There are many reason other than not foaming that requires high quality hydraulic fluid. HSTs and wet brakes are far more unforgiving than simple geared machines.
 
   / Engine oil in my Hydaulics #9  
There are many reason other than not foaming that requires high quality hydraulic fluid. HSTs and wet brakes are far more unforgiving than simple geared machines.
If I had a nickel for every Kubota I've worked on, I'd be rich.
 
   / Engine oil in my Hydaulics #10  
In all my Kubota's I've never used UDT or SUDT and I've owner at least 10 and bought them all (except one) new. I do use their filters and OEM parts but the fluid is over rated and too expensive.
 

Tractor & Equipment Auctions

Decorative Alligator Statue (A55758)
Decorative...
2018 Allmand Light Tower (Runs and Works) (A50775)
2018 Allmand Light...
2008 Ford F-450 Altec Service Truck (A55788)
2008 Ford F-450...
2023 54' Hooklift Dumpster 15 Cubic Yard (A53422)
2023 54' Hooklift...
Takeuchi TB216 (A53314)
Takeuchi TB216...
2011 Ford F-350 Versalift 29FT Bucket Truck (A55788)
2011 Ford F-350...
 
Top