Mowing ENGINE RPM's on BX2660 for Running Woods Rotary Cutter

[TripleR]

I have a bx2360 and I thought pto speed was at full throttle.

I don't have my manual handy, but there is a chart in it that shows the RPM for front and rear PTO which is pretty close. Our BX2200 didn't have a tach, so it was always full throttle. Like I mentioned earlier, you develop a feel after a while.

 

[94BULLITT]

I checked my manual the 1860 and 2360 share the same manual but I would assume all of the newer bx's are the same. Rear PTO 540 @ 3142 Mid 2500 @ 3043 I found it on specifications page 3.

 

[TripleR]

I checked my manual the 1860 and 2360 share the same manual but I would assume all of the newer bx's are the same. Rear PTO 540 @ 3142 Mid 2500 @ 3043 I found it on specifications page 3.

Yep, I just checked and it's the same on our 2660.

 

[94BULLITT]

Yep, I just checked and it's the same on our 2660.

Does that manual just cover the 2660?

 

[TripleR]

Does that manual just cover the 2660?

That is all it says on the cover; no mention of the other models.

 

[94BULLITT]

That is all it says on the cover; no mention of the other models.

I wonder why the 1860 and 2360 share the same manual instead of the 2360 and 2660?

 

[TripleR]

I wonder why the 1860 and 2360 share the same manual instead of the 2360 and 2660?

That would seem to make more sense as the 2360 and 2660 seem to be closer to the same.

 

[case245]

lumberdink use use that much rpm s for fel work i keep mine at an idle wow that way i use a gallon in bout 2-2.5 hrs

 

[TripleR]

lumberdink use use that much rpm s for fel work i keep mine at an idle wow that way i use a gallon in bout 2-2.5 hrs

With what tractor?