EZmover® Hitch System INTRO SPECIAL

banjobj · Sep 29, 2004

Well said /forums/images/graemlins/smile.gif

fastwalker19 · Sep 30, 2004

For those seeking further information, here is a link to the EZmover website: EZmover® Tractor Hitch

Muhammad · Oct 1, 2004

Good news---the free shipping offer has been extended! Thanks to the number of sales in the past month, the manufacturer was able to negotiate a better shipping rate and pass the savings along to you once again.

btownacres · Apr 5, 2006

I ordered mine over a week ago and called today to check on the status. Turns out some of the info. is not getting to the supplier. From what me, this has happened about 9 times or so. So anyone ordering may want to follow up with a call to the supplier to make sure they did recieve the order. I'm told mine would ship today. Just a heads up for everyone-

LGinIA · Apr 7, 2006

Same here, I received a notice of a order processing delay 4/6. Good news is the EZmover hitch is to ship 4/7, just in time to move my new Lund boat next weekend!

Muhammad · Apr 8, 2006

There was a period during which some orders were not getting through to the vendor in a timely fashion. But rest assured that as of last week, that problem has been corrected and all orders are going through immediately. They usually ship within 24 hours.

norcalmike · Apr 11, 2006

Ordered mine last week Tuesday and it was on my California door step the following Monday. Very nice and quality built attachment, a steal at $79.99. Thanks TBN.

Mike

DickS · May 13, 2006

What is it I don't understand about this product? What advantage does it offer compared to simply putting the trailer ball on the draw bar of the 3PT?

KiotiJohn · May 14, 2006

I got mine very quickly. I don't remember exactly, but I think not more than 4-5 days. Haven't had a chance to even open the package yet!
John

rozett · May 14, 2006

There are several advantages....

1) Much easier to move a ball from one vehicle (truck) to another (tractor).

2) I tow several items with different ball sizes. Each ball is mounted to a separate ball mount. Pull one pin and swap the ball size in 15 seconds.

3) They make several handy devices which use a hitch receiver for mounting, such as a tow hook, cargo carriers, tool racks, and I've even seen a 12v winch with a receiver mount.

Woody_NH · May 14, 2006

I got one to move the horse trailer around including pulling up a steep driveway. A ball on a 3ph drawbar has some issues: unless you buy or make a drawbar lock, the drawbar is free to rotate; the 3ph provides no downward force so going on uneven ground could result in the trailer front rising up; and the ball position is not rearward enough for real sharp turns.
With this product the bar will not rotate, a safety chain can be set to prevent the 3ph from rising and with the ball way back I can pivot the trailer with the tractor 90 degrees to the trailer.
If you have a light weight trailer, even flat terrain and no tight maneuvering to do, then the ball on the 3ph drawbar may be fine. I will say that all of the marinas around here have similar products on their tractors for moving boat trailers around.

TOL1488 · May 15, 2006

NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!

Just trying to save someone else the trouble/money, oh well needed an anchor for my pond boat anyway /forums/images/graemlins/frown.gif

TOL1488 · May 15, 2006

NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!
NOT iMATCH COMPATIBLE!!!

Just trying to save someone else the trouble/money, oh well needed an anchor for my pond boat anyway /forums/images/graemlins/frown.gif

fastwalker19 · May 19, 2006

A message from the manufacturer: Prior to JD's introduction of the IMatch we manufactured and shipped Ezmover hitches that may not have been compatible with IMatch. However, all units are now fully compatible. If anyone owns and earlier model Ezmover and wants to make arrangements to exchange it for an IMatch compatible unit, please contact us at: summitfab@aol.com to make arrangements for an exchange.

fastwalker19 · May 19, 2006

A message from the manufacturer: Prior to JD's introduction of the IMatch we manufactured and shipped Ezmover hitches that may not have been compatible with IMatch. However, all units are now fully compatible. If anyone owns and earlier model Ezmover and wants to make arrangements to exchange it for an IMatch compatible unit, please contact us at: summitfab@aol.com to make arrangements for an exchange.

TOL1488 · May 24, 2006

( A message from the manufacturer: Prior to JD's introduction of the IMatch we manufactured and shipped Ezmover hitches that may not have been compatible with IMatch. However, all units are now fully compatible. If anyone owns and earlier model Ezmover and wants to make arrangements to exchange it for an IMatch compatible unit, please contact us at: summitfab@aol.com to make arrangements for an exchange. )

Confused as to when your design was changed mine was ordered about two months ago and is not imatch compatible. To my knowledge imatch has been available for at least four years... your post sounds as if the change was made soon after release. /forums/images/graemlins/confused.gif

TOL1488 · May 24, 2006

( A message from the manufacturer: Prior to JD's introduction of the IMatch we manufactured and shipped Ezmover hitches that may not have been compatible with IMatch. However, all units are now fully compatible. If anyone owns and earlier model Ezmover and wants to make arrangements to exchange it for an IMatch compatible unit, please contact us at: summitfab@aol.com to make arrangements for an exchange. )

Confused as to when your design was changed mine was ordered about two months ago and is not imatch compatible. To my knowledge imatch has been available for at least four years... your post sounds as if the change was made soon after release. /forums/images/graemlins/confused.gif

MikefromMI · May 27, 2006

Fella's,
This is a perfect example of "You get what you pay for." It surely appears like Bad River's design will take more abuse when called for. To boot, I only live 45min from Saginaw where I could pick it up.

I'm simply looking for something to haul my Do-All Trap Thrower around the yard with. I can lay all of the products and shotguns in the FEL and use the 3pt to lift the thrower (with the legs attached) to haul it out back. In a standard hitch the legs have to come off for transport. I have a trailer also. But nothing that is over the specs of the product.

Each of us has unique uses for the items we purchase for our equipment. It's our responsibility to make sure that the equipment fits that application. Not to mention that a life time of these decisions will greatly affect your wallet.

Thanks for the savings TBN.... There's no better source of info.

MikefromMI · May 27, 2006

Fella's,
This is a perfect example of "You get what you pay for." It surely appears like Bad River's design will take more abuse when called for. To boot, I only live 45min from Saginaw where I could pick it up.

I'm simply looking for something to haul my Do-All Trap Thrower around the yard with. I can lay all of the products and shotguns in the FEL and use the 3pt to lift the thrower (with the legs attached) to haul it out back. In a standard hitch the legs have to come off for transport. I have a trailer also. But nothing that is over the specs of the product.

Each of us has unique uses for the items we purchase for our equipment. It's our responsibility to make sure that the equipment fits that application. Not to mention that a life time of these decisions will greatly affect your wallet.

Thanks for the savings TBN.... There's no better source of info.

Sully2 · Jul 28, 2006

I go my Ez-Mover in the mail the other day...and went yesterday to TSC to get the drawbar. I was sort of suprised that bolts and such came WITH the Ez-Mover. Anymore your lucky to get any "freebies" with anything.

I checked it all out! Quality product...very good welding..etc..etc. WELL worth what I paid for it and Im glad I got it...it will come in mighty handy