Fence Posts

   / Fence Posts #11  
I have seen Hedge posts that were probably 20+ years old, not only did they not rot, but they were still had what looked like "live" wood on the inside, and I have seen a couple that had roots growing out...hedge is scary stuff, I think it is some form of alien life form.

Hedge is also very hard on saw chains.
 
   / Fence Posts #12  
Hedge (Osage Orange to some) is all we use in Nebraska (of course, there is an abundance of it!). There are Hedge posts on our farm that were put in the ground in the 1910's that are still there 90 years later. The posts will last longer if they are "aged" (dry) instead of put in the ground fresh. Cut the tops (of what ever posts you get) at an angle to help keep water from standing. Have fun tamping 'em!
 
   / Fence Posts #13  
Doxhound,
Can one drive staples in seasoned hedge posts? I've heard that it's near impossible.

Tk
 
   / Fence Posts #14  
That's what my wife's dad told me -"Can't be done!". He just wraps the barb around the post, then wraps 14ga wire around that. I just pound in a staple. Tough, but it can be done. Of course, you could always cheat - cordless drill and a bit first..... /forums/images/graemlins/grin.gif
 
   / Fence Posts #15  
I've had similar experiences, avoiding tar on the post and applying a copper perservative. However, I do set the post in decomposed granite, and when packed in lifts with water it feels like cement, yet percolates like sand.
 
   / Fence Posts #16  
OH yeah - forgot to tell ya - use the short, fat staples - they'll work like a charm!
 
   / Fence Posts #17  
Doxhound,
Thanks for the tip on staples. There are some hedge trees in adjoining counties to me. Think I'll look into buying some.

TK
 
   / Fence Posts #18  
Doxhound or anyone who knows,

Can a person find hedge posts that are straight, or would they have to be sawn at a sawmill to get straight posts?

TK
 
   / Fence Posts #19  
Sorry it took so long to post back - Around here (eastern Nebraska) the hedge trees grow like weeds. Most of them have straight limbs/trunks long enough for an 8' post (sometimes several out of each tree). Most corner posts are 8"-9" in diameter, while line posts are 4"-5". Sometimes, if the post isn't straight, just get creative in how you dig the hole, and PLANT it straight. Pulled a couple posts that had been in since the 50's the other day - 5 foot straight, but had a 45 degree bend just below ground level.
 

Tractor & Equipment Auctions

Bundle of 40 Gauge Pipe (A50860)
Bundle of 40 Gauge...
2007 Amkus Rescue System (A50322)
2007 Amkus Rescue...
HUSKY 135 PSI AIR COMPRESSOR (A50854)
HUSKY 135 PSI AIR...
2018 Dodge Ram 5500 Bucket Truck - 4x4, Versalift VST40, 45FT Reach, Dakota Line Body (A51039)
2018 Dodge Ram...
UNUSED Garden Hose 164 ft. (A50860)
UNUSED Garden Hose...
Komatsu D39PX-24 Crawler Tractor Dozer (A49346)
Komatsu D39PX-24...
 
Top