Finally finished Disk Harrow

   / Finally finished Disk Harrow #61  
Mornin Wushaw,
Beautiful job and thanks for all the pics and sharing !!!

By the way, I think blue and orange go together well /forums/images/graemlins/grin.gif

Post some action shots when you have time /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #62  
Mornin Wushaw,
Beautiful job and thanks for all the pics and sharing !!!

By the way, I think blue and orange go together well /forums/images/graemlins/grin.gif

Post some action shots when you have time /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #63  
Mornin Wushaw,
Beautiful job and thanks for all the pics and sharing !!!

By the way, I think blue and orange go together well /forums/images/graemlins/grin.gif

Post some action shots when you have time /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #64  
Mornin Wushaw,
Beautiful job and thanks for all the pics and sharing !!!

By the way, I think blue and orange go together well /forums/images/graemlins/grin.gif

Post some action shots when you have time /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #65  
SWEET disc, yeah but please don't add up the price. Think it as more fun to build.
 
   / Finally finished Disk Harrow #66  
SWEET disc, yeah but please don't add up the price. Think it as more fun to build.
 
   / Finally finished Disk Harrow
  • Thread Starter
#67  
Thanks guys I appreciate the nice comments /forums/images/graemlins/cool.gif

Mikim, I think the red just looks better than white on the blue and I think the cold war is over hopefully.

Haveblue, I don't know the cost, I didn't keep track.
The bearings are the cheap (10.49) sealed ones from Agri-Supply.
I forgot that I welded the lower arm brackets with my Hobart stick and I am pretty sure I got good penetration, I just didn't have the means to bend up 3/8" plate to my liking.
I thought about gussets but it works so far.

Homebrew2, It's a Rodney Carrington koozie, I like it too /forums/images/graemlins/cool.gif

Scotty, Blue and orange does seem to go together /forums/images/graemlins/cool.gif

Thanks again guys, I had fun building this /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow
  • Thread Starter
#68  
Thanks guys I appreciate the nice comments /forums/images/graemlins/cool.gif

Mikim, I think the red just looks better than white on the blue and I think the cold war is over hopefully.

Haveblue, I don't know the cost, I didn't keep track.
The bearings are the cheap (10.49) sealed ones from Agri-Supply.
I forgot that I welded the lower arm brackets with my Hobart stick and I am pretty sure I got good penetration, I just didn't have the means to bend up 3/8" plate to my liking.
I thought about gussets but it works so far.

Homebrew2, It's a Rodney Carrington koozie, I like it too /forums/images/graemlins/cool.gif

Scotty, Blue and orange does seem to go together /forums/images/graemlins/cool.gif

Thanks again guys, I had fun building this /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #69  
Mucho thanks for the tip, I just ordered one /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #70  
Mucho thanks for the tip, I just ordered one /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

2017 Ram 5500 Valve Placer Bucket Truck with Versalift STP36NE - 41FT Working Height, Low Miles (A51039)
2017 Ram 5500...
2009 Ford F-250 Pickup Truck, VIN # 1FTSX21Y49EA41686 (A48836)
2009 Ford F-250...
2015 KENWORTH T800 MID-ROOF SLEEPER (A50854)
2015 KENWORTH T800...
Craftsman YTS 3000 42in. Riding Mower (A49346)
Craftsman YTS 3000...
2018 Ford F-450 Crew Cab Knapheide Service Truck (A49461)
2018 Ford F-450...
Killbros 260 Seed Conveyor (A51039)
Killbros 260 Seed...
 
Top