Finally finished Disk Harrow

   / Finally finished Disk Harrow #61  
Mornin Wushaw,
Beautiful job and thanks for all the pics and sharing !!!

By the way, I think blue and orange go together well /forums/images/graemlins/grin.gif

Post some action shots when you have time /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #62  
Mornin Wushaw,
Beautiful job and thanks for all the pics and sharing !!!

By the way, I think blue and orange go together well /forums/images/graemlins/grin.gif

Post some action shots when you have time /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #63  
Mornin Wushaw,
Beautiful job and thanks for all the pics and sharing !!!

By the way, I think blue and orange go together well /forums/images/graemlins/grin.gif

Post some action shots when you have time /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #64  
Mornin Wushaw,
Beautiful job and thanks for all the pics and sharing !!!

By the way, I think blue and orange go together well /forums/images/graemlins/grin.gif

Post some action shots when you have time /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #65  
SWEET disc, yeah but please don't add up the price. Think it as more fun to build.
 
   / Finally finished Disk Harrow #66  
SWEET disc, yeah but please don't add up the price. Think it as more fun to build.
 
   / Finally finished Disk Harrow
  • Thread Starter
#67  
Thanks guys I appreciate the nice comments /forums/images/graemlins/cool.gif

Mikim, I think the red just looks better than white on the blue and I think the cold war is over hopefully.

Haveblue, I don't know the cost, I didn't keep track.
The bearings are the cheap (10.49) sealed ones from Agri-Supply.
I forgot that I welded the lower arm brackets with my Hobart stick and I am pretty sure I got good penetration, I just didn't have the means to bend up 3/8" plate to my liking.
I thought about gussets but it works so far.

Homebrew2, It's a Rodney Carrington koozie, I like it too /forums/images/graemlins/cool.gif

Scotty, Blue and orange does seem to go together /forums/images/graemlins/cool.gif

Thanks again guys, I had fun building this /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow
  • Thread Starter
#68  
Thanks guys I appreciate the nice comments /forums/images/graemlins/cool.gif

Mikim, I think the red just looks better than white on the blue and I think the cold war is over hopefully.

Haveblue, I don't know the cost, I didn't keep track.
The bearings are the cheap (10.49) sealed ones from Agri-Supply.
I forgot that I welded the lower arm brackets with my Hobart stick and I am pretty sure I got good penetration, I just didn't have the means to bend up 3/8" plate to my liking.
I thought about gussets but it works so far.

Homebrew2, It's a Rodney Carrington koozie, I like it too /forums/images/graemlins/cool.gif

Scotty, Blue and orange does seem to go together /forums/images/graemlins/cool.gif

Thanks again guys, I had fun building this /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #69  
Mucho thanks for the tip, I just ordered one /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 
   / Finally finished Disk Harrow #70  
Mucho thanks for the tip, I just ordered one /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

JOHN DEERE 850J LGP DOZER (A50854)
JOHN DEERE 850J...
Unused 2025 CFG MX12RX Mini Excavator (A49461)
Unused 2025 CFG...
2015 KC TRAILER 130 BBL STEEL VACUUM (A50854)
2015 KC TRAILER...
2016 Chevrolet Impala LT Limited Sedan (A48082)
2016 Chevrolet...
2018 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2018 GENIE GTH-636...
2018 Terex RL4 4000W Towable Light Tower (A49461)
2018 Terex RL4...
 
Top