ford brush hog help

[sandman2234]

I think they are supposed to look like this.

I will have to wonder out back and see if I have anything that looks like this.

David from jax

 

[RyanL]

Thanks sandman2234 for posting that pic for me. I removed the gearbox and it has a 24 spline output shaft and an 1 1/8 6 spline input shaft. The housing has 6 bolts bolting it to the deck. I can find and model info on it.

Ryan

 

[sandman2234]

Work keeps getting in my way of making it out back to look at the ones I have. Hopefully I will get out there soon and give you an answer. Can you give us a size on the bolt pattern spacing, so we can tell about what size your gearbox is. Diagonal measurement across the center would be nice.
Since you have the gearbox off, any chance of getting a closer picture of it?

Can anyone confirm if those shaft sizes are "standard", or is this an unusual one. Sounds like the input shaft is (I think) but I don't know about the output. Most of my dealings with bushhogs is redecking them, or sharpening the blades.
David from jax

 

[sandman2234]

I just went out and looked at the two blue rusted out bushhogs I have. Both use 4 bolt hole patterns, and one looks just like the "Bushhog" brand one I have. The other looks like the gearbox is on stilts, sitting about 6-8" above the deck. I looked at all of my old gearboxes, and all use a 4 bolt pattern. Didn't figure there was any need in looking at the output shaft since the boltholes don't match up. I took a few pictures, but since it was dark, they didn't come out very well.
I come across rusted out decks pretty often, and will keep an eye out for a six bolthole pattern one.
David from jax
David from jax

 

[RyanL]

Hey guys sorry about not replying back sooner just have been busy, but i wanted to thank all you for the help, and wanted to say that i found a used gearbox locally for $50 so i got it fixed. Thanks again

Ryan

 

[sandman2234]

Good deal!!
Nothing worse than a broken mower, and nothing better than a good deal.
David from jax

 

[bjr]

Try AgriSupply Will Fit Generic gear Box bjr
Bush Hog Gear Box - Will Fit

 

[pitchfork]

I think they are supposed to look like this.

I will have to wonder out back and see if I have anything that looks like this.

David from jax

I have that exact Ford brush hog shown in the photo and I'm desperately seeking a new gearbox for it. Six bolts to the deck and 24 spline. All the parts dealers I've talk to act like I'm crazy when I tell them 24 spline. They say it's unheard of, and I'll likely have to modify to a square 4 bolt pattern to the deck and apply a new 12 spline hub to the blade bar. Any help on locating the correct gearbox for this implement would be appreciated.

 

[pitchfork]

Thanks sandman2234 for posting that pic for me. I removed the gearbox and it has a 24 spline output shaft and an 1 1/8 6 spline input shaft. The housing has 6 bolts bolting it to the deck. I can find and model info on it.

Ryan

I have that exact Ford brush hog yet don't know the model#. I need a gearbox. Any info would be great.

 

[SDT]

A close friend of mine has a Ford cutter identical to the one in the photo for sale.

I have inspected it and can verify that it has a good gearbox. It needs a tail wheel and blades but is in good condition otherwise.

Email me and I will put you in touch with him.

SDT (DEan)