Silvic
Gold Member
In reality we are all jealous of what SA has.
Not only is that a really cool table he has lots of other things that we all covet. A very talented man and a well equipped shop.Fork attachment build.
- Thread starter Shield Arc
- Start date
- Views: 16317
Not only is that a really cool table he has lots of other things that we all covet. A very talented man and a well equipped shop.
OP
Shield Arc
Super Member
The frame to my welding table, I built in the early 1980s, it is the same height as a flat bed truck I had at the time. I could use a come a long to drag a diesel drive welder I had off the flat bed onto the frame. Or from the frame to the flat bed.
When I retired I wanted to use the frame for a table, but didn't have a plate. A good buddy of mine had just been reassigned as project superintendent in the local Navy ship yard to build the Pier D air craft carrier pier. I called Kurt up, and ask him to grab me a 4' x 8' x 3/4" plate next time he was at the yard in Seattle. Couple days later Kurt shows up at me house with a plate. I ask him if he made a special trip to the yard to get the plate. He replied "no way, I'm not driving in that traffic. I just went down to the steel yard and bought it for you".
Pays to work for a large construction company!
When I retired I wanted to use the frame for a table, but didn't have a plate. A good buddy of mine had just been reassigned as project superintendent in the local Navy ship yard to build the Pier D air craft carrier pier. I called Kurt up, and ask him to grab me a 4' x 8' x 3/4" plate next time he was at the yard in Seattle. Couple days later Kurt shows up at me house with a plate. I ask him if he made a special trip to the yard to get the plate. He replied "no way, I'm not driving in that traffic. I just went down to the steel yard and bought it for you".
Pays to work for a large construction company!
OP
Shield Arc
Super Member
Well, what do you think?
Welded little tabs to the frame so the forks don't bounce all over the place. Had to make new upper pad eyes on the upper back. I forgot he has a quick hitch.
Pretty much done, just need to do a little clean up. Will weld it all up once I hook it up to his tractor to make sure every thing is going to fit / work.
Welded little tabs to the frame so the forks don't bounce all over the place. Had to make new upper pad eyes on the upper back. I forgot he has a quick hitch.
Pretty much done, just need to do a little clean up. Will weld it all up once I hook it up to his tractor to make sure every thing is going to fit / work.
Attachments
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Beauty !!!!
Maybe use your existing bridge type bracing to incorporate a full see through backrest?? Using same width flat bar placed vertically?
If you go that route, I like to place the center bars straight (perpendicular to machine) and the ones on each side slightly angled for better see through vision from tractor seat. Terry
Edit: refer to my earlier photo showing ugly primerd 'back rest'.
Maybe use your existing bridge type bracing to incorporate a full see through backrest?? Using same width flat bar placed vertically?
If you go that route, I like to place the center bars straight (perpendicular to machine) and the ones on each side slightly angled for better see through vision from tractor seat. Terry
Edit: refer to my earlier photo showing ugly primerd 'back rest'.
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Or maybe cut out a fancy "Shield Arc" logo on your plasma CNC table for the backrest.
Terry
Terry
OP
Shield Arc
Super Member
Terry I'll leave the customization to my brother-n-law. He has forgotten more about welding / fabrication than I'll ever know.
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
In that case you'd better start taking TBN member's requests for suggestions on your NEXT documented build.
Terry
Terry
dntfxr
Platinum Member
Point taken BB.
Nice build SA, I appreciate you sharing with those of us with a desire to learn. I apologize to you if I came across as suggesting that I know a better way to do it than you. I have zero experience building fork attachments and in my ideas/ cluttering up your thread I was thinking of ways I could strengthen forks for my tractor which may or may not need larger reinforcements. I realize I went about that the wrong way and I should have started a new thread. I had a few other questions but maybe another time will be better. Again thanks for your help
Nice build SA, I appreciate you sharing with those of us with a desire to learn. I apologize to you if I came across as suggesting that I know a better way to do it than you. I have zero experience building fork attachments and in my ideas/ cluttering up your thread I was thinking of ways I could strengthen forks for my tractor which may or may not need larger reinforcements. I realize I went about that the wrong way and I should have started a new thread. I had a few other questions but maybe another time will be better. Again thanks for your help
OP
Shield Arc
Super Member
dntfxr I didn't take it that way at all! I thought you were throwing out suggestion
. We are all here to learn from each other.:thumbsup: You can start a new thread, or use this thread, ask any question you want. It won't upset me at all!
LD1
Epic Contributor
Turned out nice.
The way you did the bar inside to beef up the heel is nice. Not what I was picturing based off what you were describing. I thought it was only going to be inside the horizontal and stop at the heel. What you did should.make that heel area a good bit stronger.
The way you did the bar inside to beef up the heel is nice. Not what I was picturing based off what you were describing. I thought it was only going to be inside the horizontal and stop at the heel. What you did should.make that heel area a good bit stronger.