OK, I got the trailer jack installed and found a tire/wheel combo that fit the bolt pattern on the old truck axle that is the axle for the trailer. The tire is about 3 inches smaller than the other tire, but I was able to get it for $15, and it is only getting pulled in the pasture and woods around our property. But as soon as there is another wheel/tire at pull-a-part I will get a matching pair. Next is to replace the hydraulic lines from the valves to the cylinders. Then I have to wait for my father in law to get home for christmas so I can use his Miller Bobcat Welder/Generator to fix the weld that is broken. I should have it all finished before the first of the year.
Free Log Splitter (update)
- Thread starter mudbug250
- Start date
- Views: 1279
GE222
Gold Member
Can't beat the price for your unit. I'm sure we would all like to see some pictures!
Pete Judd
Veteran Member
- Joined
- Aug 18, 2010
- Messages
- 1,013
- Location
- The Thin Gravy Ranch in The wet PNW
- Tractor
- Yanmar 186d, JD 314
Almost nothing free is "cheap" I always think about the on going cost, been bitten to many times. Good luck on your planes.
Here are some similar links:
