Sooner79
New member
On a 15 series, what size socket is used to remove the front axle fill plug? Thanks.
Front Axle Filler Plug Size (socket to use)
- Thread starter Sooner79
- Start date
- Views: 1221
ptsg
Super Member
24 or 27MM but I'll check later today, in an hour or so.
Doesn't Branson include a Branson labeled bag with a bunch of tools and small grease gun with the tractor in the US? Over here they send a nice bag with the manual and a bunch of tools. About the cheapest tools but still handy to have and I keep them in the toolbox with the tractor.
Doesn't Branson include a Branson labeled bag with a bunch of tools and small grease gun with the tractor in the US? Over here they send a nice bag with the manual and a bunch of tools. About the cheapest tools but still handy to have and I keep them in the toolbox with the tractor.
K5lwq
Elite Member
- Joined
- Aug 6, 2017
- Messages
- 4,801
- Location
- Mineola, TX
- Tractor
- Kioti LK2554, Branson 4815C, Satoh Beaver, Speedex
No! But we may get a hat.
ptsg
Super Member
Ha! Touché!No! But we may get a hat.
North to Alaska
Gold Member
I would actually appreciate a Branson hatNo! But we may get a hat.
K5lwq
Elite Member
- Joined
- Aug 6, 2017
- Messages
- 4,801
- Location
- Mineola, TX
- Tractor
- Kioti LK2554, Branson 4815C, Satoh Beaver, Speedex
Brother, I don’t think they have a appropriate hat for where you live. I seem to remember it being so cold there that steel becomes brittle.I would actually appreciate a Branson hat
Branson Bob
Platinum Member
I would actually appreciate a Branson hat
Brother, I don’t think they have a appropriate hat for where you live. I seem to remember it being so cold there that steel becomes brittle.
I received a couple of Branson caps when I bought mine. They're truckers caps (mesh back)... definitely not the best headwear for Talkeetna.
ptsg
Super Member
I finally confirmed what wrench it uses for the front axle dipstick and it's indeed a 27 MM wrench.
Oh and little tip, even though it uses a big wrench, it doesn't need to be crazy tight, just snug. There is an O-ring that does the sealing between the dipstick plug and the casting which tends to get stuck on the casting.
Oh and little tip, even though it uses a big wrench, it doesn't need to be crazy tight, just snug. There is an O-ring that does the sealing between the dipstick plug and the casting which tends to get stuck on the casting.
Last edited:
