Gannon Box Blade with hydraulic rippers

[murray918]

Brian,

Both the top and bottom pins are 3/4"

 

[murray918]

I have another question....What are the pins called the hook the top link to the tractor. The one on my tractor seems to be cat 2 on left side and cat 1 on the right. A friend of mine has one that can be used as a cat 2 pin and then the end of it has a cat 1 pin. I feel so lost when it comes to some of these terms.

 

[MtnViewRanch]

I'm very new to the tractor world. I'm not familiar with what a side link is

Top & tilt cylinders. Top link, side link, makes grading soooooooooooo much nicer.

 

[murray918]

I only have 1 rear remote. Seems like you would have to have several more remotes to run all that stuff. Where do you put all the additional controls for all the rear remotes.

 

[MtnViewRanch]

I only have 1 rear remote. Seems like you would have to have several more remotes to run all that stuff. Where do you put all the additional controls for all the rear remotes.

Your tractor can have 2 OEM remotes, but that is often not enough. Just for a Gannon with hydraulic actuated rippers and "T&T" you need 3. And often even more. Then you can do something like what I did on the back of my Mahindra 3215. I now have 4 sets.

 

[xring100]

I have another question....What are the pins called the hook the top link to the tractor. The one on my tractor seems to be cat 2 on left side and cat 1 on the right. A friend of mine has one that can be used as a cat 2 pin and then the end of it has a cat 1 pin. I feel so lost when it comes to some of these terms.

Do you have a picture?

 

[TripleR]

I'm very new to the tractor world. I'm not familiar with what a side link is

This may help with some nomenclature if you are new to tractors: "How To" Operate and Drive a Tractor: Part 1 - YouTube

 

[murray918]

UPDATE......... I have had the hydraulic cylinder installed for about a month. It works flawlessly....Thank you very much Brian

 

[Poopdeck Pappy]

Glad it all worked out for you. I'm sure you are enjoying that beast of a box blade. I know I sure like mine.

 

[xring100]

Awesome glad its working out