Going from timber to grass.....

[chrishet]

Wow, Thanks for all the feedback. I knew I was in the right place! I'll need to do some research.

My property is being cleared for subdividing it into smaller parcels. It is kind of a unique project, an astonomy village. Each lot will have a small cabin and an observatory. We need the trees gone as they will grow and obstruct our field of view.

Here is a panoramic of the site from a deer stand

http://www.hetlage.com/images/long_shot_lower_50.jpg

My key reason for figuring this out ahead of time is so I get the right tractor. My local dealer recommended a 38hp tractor for general field maint but I'm thinking I'll need a bit more HP.

Thanks again for all the advice.

-Chris

 

[PSDStu]

Highbeam says it best... a dozer with a root rake, and a tracked hoe sure made quick work of clearing 3 acres of dense woods of mine a few weeks ago.

Your going to have roots left no matter which way you go, how you handle those roots after clearing can vary.

Still trying to decide what I'm going to do with my roots left over.

My drag a large disc over them and see what happens. Thankfully in the Panhandle part of FL it's sandy soil.

 

[chrishet]

Hi 1bush2hog, we are in Taliaferro Ga. It's a huge job but we bought this land at a good price so we can afford to improve it ourselves.

 

[chrishet]

Partsman2, that is one of the meanest implments I have ever seen!

</font><font color="blue" class="small">( Egon,

I agree completely!

I actually have one that I just bought for the front of my JD 4710 which is a 48 HP tractor. Here is a link to my post with pics last week. Grapple pics

I used it about 10-12 hours last weekend and I am impressed with what I can do with it. I can raise the grapple full open and roll it down and push a 4 - 6" tree down. Then I go back and dig the roots out with the rake, snatch them up with the grapple and pile it up.

chrishet - It could be an option but I don't know your time frame. This would take a long time to do 100 acres. /forums/images/graemlins/grin.gif Get a BIG cooler. /forums/images/graemlins/shocked.gif )</font>

 

[have_blue]

If the trees are as small as they look in that picture, rent a big tractor and a big HD bush hog and chop them up. Bush hogging regularly will finish them off and promote grass growth. Eventually, all you will need is a finishing mower. If you're in a big hurry, you can disk it up with a big tractor and heavy disk.

 

[Partsman2]

After seeing the picture I'd definitely use a dozer with a root rake. Then pile the trees and burn them.

Also, just a random thought, do you have any mulch companies around? I would say they would be about the only possible avenue for selling the trees. I don't know any thing about the mulch business though and if they would have any interest.

 

[40Kchicks]

I think you have a couple options. If you don’t mind the stumps you could get a skid steer with high flow hydraulics and a hydraulic slasher/mower. The skid steer mowers are much heavier duty than the tractor models but cost more and aren’t usually as wide because they are for heavy brush. The skid steer would come in really handy for the construction part of the project also. You don’t need maintenance equipment yet, you need construction equipment. Later you might need a dozer to grade in roads and building sites.

Another option would be to look into an excavator with grapple and dozer for the construction part of your project. The excavator/dozer combination will get the job done.

I got my first taste of what an excavator can do this last year when I built a new barn and road onto my property. I ran out of budget for excavation so I rented a JD 320 excavator and did it myself. I was a little nervous at first but after a couple of hours the machine became my hands. I moved tons of dirt very quickly and efficiently.

For your project you will need at least two or three people. One running the excavator plucking trees out and a dozer operator moving trees into burn piles, grading the landscape, and one person one person for holding the laser stick and help in general. This is going to be a big project. You will be time and money ahead to go with larger equipment at first then sell it when your project is done.

Eric

 

[chrishet]

Thanks guys, we have a good budget for this project and will most likey contract out most the clearing work.

I'm starting to think the dozer/root rake is going to be our cheapest route (thanks all for the great posts!). If we do go this route we will need to finish off the soil. I am thinking we will need a real good tractor for this work. This is what I am currently thinking, (I love this site!); 1)Kubota 5030, 2)Kubota FEL with HD Tooth bucket, Kubota Backhoe, Rhino GR60 Rotary Mower, a Landscape Rake, and/or a Box Scraper. I was thinking we may also need a tiller or pulverizer, thoughts?

We are waiting on a quote from a contractor that has a very cool process but will cost us about $2k/acre. What he does is, first sheds/mulches the trees using a forestry type mower. This grinds and mulches all the trees down to ground level leaving a fine pine mulch behind. Then he goes over it with a soil prep device (looks kinda like a tiller) that goes 12-16 inches below the soil and grinds up all the roots and stumps. What is left is a very fine soil with all the nutrients in tact. The way he explains it we can drive right behind him with the tractor and plant seed. Saves time, lots of $. We could probably reduce the tractor costs for us, perhaps a 3830 instead of the 5030 and since he will clean up a lot of our other over grown stuff we may not need the Rhino GR, and get a Bush Hog or something less.


Here is his site, very nice folks. http://www.landclearingservices.net/index.htm

We could also rent the gear from him and we may look into that...

 

[chrishet]

I have contacted a mulch company and am waiting for a reply. That might help offest some of the cost....good idea.

 

[tjkadar]

That is the same option we are looking at for clearing out about 30 acres. Let me know how it goes for you.