Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,700
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Glad Whipper improving Don...hugs for Whipper.
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 19072372
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,700
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Shut the snow off cap valve end remove handle.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,700
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
No thanks had enough this winter.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,700
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
39F fair weather clouds good day snow melting.
Got some good puttering done outside walk down the long driveway looks like I got lot extra extra raking to do cause by last two plowing.
12 deer show up half hour ago for their dinner,couple youngsters were running jumping about guess there feeling spring in the air.
Watch good move??? sharte bowl ice cream all that's plan.
Enjoy your evening all.
Got some good puttering done outside
walk down the long driveway looks like I got lot extra extra raking to do cause by last two plowing. 12 deer show up half hour ago for their dinner,couple youngsters were running jumping about guess there feeling spring in the air.
Watch good move??? sharte bowl ice cream all that's plan.
Enjoy your evening all.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,700
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
How high the water momma...6' high and rising etc. etc.
ronjhall
Super Star Member
Txdon, hope whipper is feeling better.
buckeyefarmer
Epic Contributor
How high the water momma...6' high and rising etc. etc.
Roy Jackson always brought that one up. RIP
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,873
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Good (Saturday) morning. Overnight Low of 6C and it's presently 19.7C, bit of a breeze and clear.
Not much on yesterday arvo but I did replace a few star-picket 'caps', due to UV damage... and, of course, spotted a few more thistles (Lord, they grow fast!) so I completed another sweep of the property, finding even more than I saw before. Last thing was to re-fill the Round-Up spray bottle.
Not much on for today... that I know of anyway.
That's about it, take care all.
Not much on yesterday arvo but I did replace a few star-picket 'caps', due to UV damage... and, of course, spotted a few more thistles (Lord, they grow fast!) so I completed another sweep of the property, finding even more than I saw before. Last thing was to re-fill the Round-Up spray bottle.
Not much on for today... that I know of anyway.
That's about it, take care all.
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,496
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
Hope whipper continues to improve Don
Nice pictures BEF
Nice pictures BEF
mpham
Veteran Member
Quick update:
All together and in its new home. Needed help getting it up and onto the pedestal. Even made a few test cuts. Runs great. Big difference from my old delta 3 wheel. You can barely hear it running.
Will be changing out the supplied blade for a 1/4 inch timber wolf. Maybe I will try to make another one piece cut reindeer.
Hope everyone stays safe and healthy!
All together and in its new home. Needed help getting it up and onto the pedestal. Even made a few test cuts. Runs great. Big difference from my old delta 3 wheel. You can barely hear it running.
Will be changing out the supplied blade for a 1/4 inch timber wolf. Maybe I will try to make another one piece cut reindeer.
Hope everyone stays safe and healthy!
Last edited:
