Grappling fun - A Picture Thread....

[4570Man]

Piston might not be your master, but he is right. We have beaten this dead horse quite enough. If you want to continue beating a dead horse there are other threads you can do that in. No need to trash up a good thread.

 

[Jim Timber]

You should watch the video and consider my remarks too. It doesn't have a single thing to do with which is better or worse.

 

[94BULLITT]

From now on when the single lid vs dual lid debate comes up I'm posting this pic.

 

[94BULLITT]

From now on when the single lid vs dual lid debate comes up I'm posting this pic.

 

[4570Man]

You should watch the video and consider my remarks too. It doesn't have a single thing to do with which is better or worse.

The video posted by 94bullet? That looks like a terrible tractor grapple. That would be way better suited for an excavator. And if our double lid grapples cost lift capacity, that thing is far worse. A knuckle boom loader could have moved that pile of logs in about 45 seconds.

 

[94BULLITT]

There are better designs for smaller machines. That was the only video I could find at the time. There is a guy on another forum that has one he uses on a toolcat.

 

[TomSeller]

Piston's not my boss either, but he is the OP and I will honor his request for pictures and stay on point.

I am really digging back years to come up with what I can, just not taking the time much anymore to get off the tractor and snap a pic. This grapple turned out to be an irrigation pipe hauler in a pinch. Almost forgot about using it for that. The rear downriggers stabilized the other end of the pipes.

 

[dragoneggs]

Man, I'd vote for ya! :laughing: We're blessed to have you as a customer for the awesome Wicked Grapple pics AND the beautiful, Grapple inspired poetry. If that doesn't restore peace to this thread, I don't know what will..... Travis

Amen.

 

[4570Man]

Piston's not my boss either, but he is the OP and I will honor his request for pictures and stay on point. I am really digging back years to come up with what I can, just not taking the time much anymore to get off the tractor and snap a pic. This grapple turned out to be an irrigation pipe hauler in a pinch. Almost forgot about using it for that. The rear downriggers stabilized the other end of the pipes.

I have taken plenty of pictures from the seat.

 

[lostcreekranch]

Piston's not my boss either, but he is the OP and I will honor his request for pictures and stay on point. I am really digging back years to come up with what I can, just not taking the time much anymore to get off the tractor and snap a pic. This grapple turned out to be an irrigation pipe hauler in a pinch. Almost forgot about using it for that. The rear downriggers stabilized the other end of the pipes.

Tom, you're now an official pipe liner. ;-)

Sent from my iPad using TractorByNet