Guess the use?
- Thread starter cleatus
- Start date
- Views: 4868
TOMDUALLY
Silver Member
give us a better picture, this one just looks like a 3/4 plug with some sloppy welding /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
TOMDUALLY
Silver Member
give us a better picture, this one just looks like a 3/4 plug with some sloppy welding /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
Taylortractornut
Elite Member
- Joined
- Mar 27, 2002
- Messages
- 2,921
- Location
- Iuka Mississippi USA
- Tractor
- 3550 Fard Backhoe and a 1948 Farmall Cub,
looks like a and air impact starter for a small engine.
Taylortractornut
Elite Member
- Joined
- Mar 27, 2002
- Messages
- 2,921
- Location
- Iuka Mississippi USA
- Tractor
- 3550 Fard Backhoe and a 1948 Farmall Cub,
looks like a and air impact starter for a small engine.
Taylortractornut
Elite Member
- Joined
- Mar 27, 2002
- Messages
- 2,921
- Location
- Iuka Mississippi USA
- Tractor
- 3550 Fard Backhoe and a 1948 Farmall Cub,
Looks like a an air impact starter for a small engine.
Taylortractornut
Elite Member
- Joined
- Mar 27, 2002
- Messages
- 2,921
- Location
- Iuka Mississippi USA
- Tractor
- 3550 Fard Backhoe and a 1948 Farmall Cub,
Looks like a an air impact starter for a small engine.
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
That looks like a good idea. Alot easier than pulling on a cord and cussing. /forums/images/graemlins/grin.gif
GeneD14
Veteran Member
- Joined
- Jul 29, 2003
- Messages
- 1,458
- Location
- Tennessee
- Tractor
- Kubota B26 TLB, Allis Chalmers D17 series IV, Kubota ZG-23 Mower, Kubota ZD 1211, Kawasaki Mule 610, Stihl 361, Stihl 045 AV Super, and a Stihl 660 Ported and tuned
That looks like a good idea. Alot easier than pulling on a cord and cussing. /forums/images/graemlins/grin.gif
tlbuser
Veteran Member
Could be a slick answer, but what happens in the event of a back-fire? Might result in a slight injury and hurt feelings /forums/images/graemlins/shocked.gif
tlbuser
Veteran Member
Could be a slick answer, but what happens in the event of a back-fire? Might result in a slight injury and hurt feelings /forums/images/graemlins/shocked.gif
Iplayfarmer
Super Member
I had a similar system with just a large socket and a 3/8" bolt with the head ground to a square to drive the socket.
Engine backfired at just the wrong time and ruined a 1/2" drill.
Engine backfired at just the wrong time and ruined a 1/2" drill.
Iplayfarmer
Super Member
I had a similar system with just a large socket and a 3/8" bolt with the head ground to a square to drive the socket.
Engine backfired at just the wrong time and ruined a 1/2" drill.
Engine backfired at just the wrong time and ruined a 1/2" drill.
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
You can use an old 1/2" drive ratchet head to avoid kick back.
3RRL
Super Member
- Joined
- Oct 20, 2005
- Messages
- 6,931
- Tractor
- 55HP 4WD KAMA 554 and 4 x 4 Jinma 284
You can use an old 1/2" drive ratchet head to avoid kick back.
Here are some similar links:
