I think I may have already answered my own question after doing a bunch of research looking for a replacement spring. Seems I can buy the spring for about 125.00 but, in all honesty, I had no idea what it was even for till doing the research and therefore, I am not sure I should spend the money for a new one. Have used my machine off and on for 350 or so hours and never paid much attention to it till a branch got in it and I ended up bending it pretty badly. Does anyone actually use it or do you agree that I would be just as well without it? Shouldn't be to hard to take off. Thanks.
H240 loader, leveling indicator issue
- Thread starter fishrman
- Start date
- Views: 2349
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,449
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Pic of what you are concerned about would help with some suggestions.
dodge man
Super Star Member
I do use mine but I think I could get by without it.
Zebrafive
Super Member
Get the tube style.
Not sure that is made for the H240? Also not sure I really need one since I didn't even know I had one till I bent it.
Do you use it to make sure it is level?
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,449
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
I use mine a lot to return the forks (and bucket) to parallel with the ground.
Can do that before the FEL arms are back down to working position. Very handy for what I use my forks and bucket for on the FEL. Can't imagine getting along without it, but some don't use the FEL for much.
This H240 may have self-leveling arms, can't tell for sure. If that is the case, prolly not needed so much.
Can do that before the FEL arms are back down to working position. Very handy for what I use my forks and bucket for on the FEL. Can't imagine getting along without it, but some don't use the FEL for much.
This H240 may have self-leveling arms, can't tell for sure. If that is the case, prolly not needed so much.
I am not sure if it is self leveling or not. I just took it off and will try to straighten it up and put it back on. Thanks.
dodge man
Super Star Member
I use it to get it close to level and then go by how the bucket is cutting or grading.
