Honda Foreman 450 fuel leak

[pollolittle]

Cool, the first I have ever seen. I see NOW! It does put the issue to rest about non adjustability though. I have torn apart many carbs and that is a first for me. Have you replaced the float and needle? Did it come with the rebuild kit? Looked up on a site and for $55 you could replace the needle and float.

$66 gets you the new petcock valve and screen.

http://www.hondaatvforums.net/forums/repair-maintenance/7139-air-cut-off-valve-whats-do.html

http://www.ronayers.com/Fiche/TypeI...odel/TRX450ES/GroupID/317987/Group/CARBURETOR

#27 at the top left corner. Also $63.

 

[JDgreen227]

Cool, the first I have ever seen. I see NOW! It does put the issue to rest about non adjustability though. I have torn apart many carbs and that is a first for me. Have you replaced the float and needle? Did it come with the rebuild kit? Looked up on a site and for $55 you could replace the needle and float.

$66 gets you the new petcock valve and screen.

Yes...got a rebuild kit from the dealer and it came with new gaskets, float needle and float...$38 and the thing still leaks....grumble grumble.

 

[pollolittle]

OMG I think ive met my match with this honda

Lot of good ideas to check as you read this. I know it doesn't pertain just thoughts to peruse.

 

[JDgreen227]

OMG I think ive met my match with this honda

Lot of good ideas to check as you read this. I know it doesn't pertain just thoughts to peruse.

Thanks very much for the link!!

 

[FullStrutFarm]

I know this post is old but I have a Foreman just like your with the exact problem and have tried everything you had listed and it still leaks. Did you ever get it resolved?

 

[JDgreen227]

I know this post is old but I have a Foreman just like your with the exact problem and have tried everything you had listed and it still leaks. Did you ever get it resolved?

Just sent you a PM...it details my solution of pressing a tiny thin O-ring into the carb body...I just did that last month...that seems to work but it is trial and error getting the proper thickness. I wish Honda would simply have made the float adjustable.