Hoye Tractor

[careyo63]

They have a lot to do!! We all can see that. ASAP is getting it straightened out I'm sure. I could only imagine all the B! they're are having to go through! Enough members on here to try to keep up with support until they do!! I noticed Fredricks has changed also

 

[HoyeTractorPartsDept]

Can you post a link to get me to YM1401? I just tried it again with no luck. I'm redirected. I did search by equipment within Partsasap's site and found many more parts but no diagrams/exploded view of parts manual.

Are you looking for a specific part. I might be able to veer ya in the right direction.

 

[careyo63]

No Dia. on Hoye site I believe it was on this thread. So I helped him out which he thanked me for.

 

[clemsonfor]

Just

Can you post a link to get me to YM1401? I just tried it again with no luck. I'm redirected. I did search by equipment within Partsasap's site and found many more parts but no diagrams/exploded view of parts manual.

Saw this post. I was trying to get on there a few weeks ago and it looks like the site totally changed and no longer shows them. Just like lists of parts of I remember right? It was super useful for working on the tractor to look at the exploded views of the assemblies. Also helped In ordering parts. I ordered pretty much every part I have ever needed from Hoye, I liked the diagrams. Was also easy to ask about a part with them you could refer to them.

 

[bmaverick]

Just

Saw this post. I was trying to get on there a few weeks ago and it looks like the site totally changed and no longer shows them. Just like lists of parts of I remember right? It was super useful for working on the tractor to look at the exploded views of the assemblies. Also helped In ordering parts. I ordered pretty much every part I have ever needed from Hoye, I liked the diagrams. Was also easy to ask about a part with them you could refer to them.

I've seen some changes on the Hoye site. And the search engines will tell you something is there via link or images, you click on it and it's missing on the Hoye site now.

Seems the Parts ASAP make-over on the site could follow the Sparex or Fredricks sites. This removes the cross references and narrows the ability to find alternatives. When this happens, prices can be raised.

Parts ASAP also has Yesterdays Tractors too.

If you go to Tractor Joe, it's now a full redirect to Parts ASAP site.

 

[clemsonfor]

I fear something like that might of been planned. For the most part the parts from Hoye Tractor were not outrageously priced. Many items were a good deal I thought especially with the support that was provided before and after the sale. I bought a three point valve from Aaron. Basically to keep a super long story short I bet we had 70 some messages back and forth on their help ticket system trying to figure out what was going on with the parts I got . I joked and said that must have been the longest running thread ever and he said no, not even close.

I've seen some changes on the Hoye site. And the search engines will tell you something is there via link or images, you click on it and it's missing on the Hoye site now.

Seems the Parts ASAP make-over on the site could follow the Sparex or Fredricks sites. This removes the cross references and narrows the ability to find alternatives. When this happens, prices can be raised.

Parts ASAP also has Yesterdays Tractors too.
View attachment 841453

View attachment 841454

If you go to Tractor Joe, it's now a full redirect to Parts ASAP site.
View attachment 841455

 

[bmaverick]

I fear something like that might of been planned. For the most part the parts from Hoye Tractor were not outrageously priced. Many items were a good deal I thought especially with the support that was provided before and after the sale. I bought a three point valve from Aaron. Basically to keep a super long story short I bet we had 70 some messages back and forth on their help ticket system trying to figure out what was going on with the parts I got . I joked and said that must have been the longest running thread ever and he said no, not even close.

we all miss Aaron. He said he'll hang around, but it's been silent.

He talked and breathed Yanmar parts and tractors for most of his life. Now what? To just stop, is like telling a pianist never to touch a keyboard ever again. Or an artist never to pick up a brush again.

 

[AaronM]

Thank you all for your kind words. I am still here and I still visit TBN at least once a week but I’m not really able to post much right now. I am no longer working for ASAP.

I am currently taking some time off to hang out with the family and enjoy some hobbies that I was not able to do before.

I really do appreciate all of your kind words and all of your support over the last 20+ years!

Aaron

 

[California]

Aaron, is there some way to provide all those parts diagrams to the new owners? Do you have a backup copy?

They are an immensely valuable resource. I expect having them online would improve sales.

 

[careyo63]

Aaron, is there some way to provide all those parts diagrams to the new owners? Do you have a backup copy?

They are an immensely valuable resource. I expect having them online would improve sales.

FWIW I just looked at what Diagrams I do have. All the YM2000 or 2cyl. and the only one I don't see is Power shift. There's 33 dia. in all. I can scan them and I may have them on CD. I'm going to look for them on Disk Etc. If someone needs a Dia. section PM. me and I'll scan it and get it to you. Hopefully they may show up on ASAP but if not I'll do the best I can. Posted this pic before. I can look up all the Part #'s for almost all Yanmar early models. It barely fit in the 3 ring Binder.

Attachments

• 
  000_0296.JPG

  1.4 MB · Views: 370

​

 

[clemsonfor]

Thank you all for your kind words. I am still here and I still visit TBN at least once a week but I’m not really able to post much right now. I am no longer working for ASAP.

I am currently taking some time off to hang out with the family and enjoy some hobbies that I was not able to do before.

I really do appreciate all of your kind words and all of your support over the last 20+ years!

Aaron

If you read my post a few up from this message I'm quoting, you probably know who I am...or at least remember me and that issue with the two defective three point lift valves! Probably narrows it way down!

 

[clemsonfor]

FWIW I just looked at what Diagrams I do have. All the YM2000 or 2cyl. and the only one I don't see is Power shift. There's 33 dia. in all. I can scan them and I may have them on CD. I'm going to look for them on Disk Etc. If someone needs a Dia. section PM. me and I'll scan it and get it to you. Hopefully they may show up on ASAP but if not I'll do the best I can. Posted this pic before. I can look up all the Part #'s for almost all Yanmar early models. It barely fit in the 3 ring Binder.

Attachments

• 
  000_0296.JPG

  1.4 MB · Views: 370

​

I sure wish that was digital! I'd send you a thumb drive to load it onto for me and pay shipping both ways for it.

Well I really only want the ym2000. If it's 33 pages. There probably not that high resolution. I wonder how many would fit in an email? Maybe we can figure out the postage and I get you to print them out for me? I'm not working in the Atlanta area like I was back in the day otherwise I'd say I would just swing by and grab some hard copies from you .

 

[careyo63]

I sure wish that was digital! I'd send you a thumb drive to load it onto for me and pay shipping both ways for it.

Well I really only want the ym2000. If it's 33 pages. There probably not that high resolution. I wonder how many would fit in an email? Maybe we can figure out the postage and I get you to print them out for me? I'm not working in the Atlanta area like I was back in the day otherwise I'd say I would just swing by and grab some hard copies from you .

You know your welcome to them. And sure enough the reason I had my son set it up for me to print them. Expecting a worse case scenario Plus it gave me something I could do back then. Anybody needs one of the dia. is welcome for that matter. I'll work on getting a Digital file going if I can't find it.

 

[clemsonfor]

You know your welcome to them. And sure enough the reason I had my son set it up for me to print them. Expecting a worse case scenario Plus it gave me something I could do back then. Anybody needs one of the dia. is welcome for that matter. I'll work on getting a Digital file going if I can't find it.

Thanks. I would imagine if you can trim out or combine all 33 pages for the YM2000 it would probably still be email-able size. Like I said there probably not that high quality or large of a file size.

 

[careyo63]

I have the Ym2000 Diagrams all of them on Digital but they all won't load on here. They make a good way to reference parts That's for sure. PM me LOL...

 

[careyo63]

Thanks. I would imagine if you can trim out or combine all 33 pages for the YM2000 it would probably still be email-able size. Like I said there probably not that high quality or large of a file si

Try the next replies in 10 files.

 

[careyo63]

10-20

 

[careyo63]

20-30

 

[careyo63]

30-35

 

[careyo63]

I think that's all them. Sorry if there may be double posts or missed any Dia.. The PC. it was on was old as can be and super slow. Sure makes it easier when ordering parts.