I think I am getting too fat

   / I think I am getting too fat #11  
My steering cyl are probably 25 yrs old and still good with no leaks.

You say you have rebuild them several times. Did you use factory or PT's seal's, or off the shelf look-a-like seals?
 
   / I think I am getting too fat #12  
My o-rings were in terrible shape a couple of years ago. Both of the main piston o-rings had chunks missing. I will likely be pulling them soon and looking. But I would actually say they are made pretty well.

Ken
 
   / I think I am getting too fat
  • Thread Starter
#13  
Factory only. I am getting about 6 years realistically out of the cylinders.

On of the big concerns was when I toook them apart the last time there was chunks missing out of one of the o-rings. Not sure which pump it is now jammed into....
 

Tractor & Equipment Auctions

2021 Case Trident 5550 Spreader (A51039)
2021 Case Trident...
2013 F-550 Bucket Truck (A51039)
2013 F-550 Bucket...
Morooka MST 660VD Tracked Dump Truck (A51039)
Morooka MST 660VD...
JCB 3CX 15HFCE BACKHOE (A51242)
JCB 3CX 15HFCE...
Adams 8 Ton Weigh Hopper (A51039)
Adams 8 Ton Weigh...
3000 Gallon Black Poly Water Tank (A49461)
3000 Gallon Black...
 
Top