OP
MarcusCarr
Silver Member
Yep, trying to find the camera, then I will get pics up. The modification took about 20 minutes.
Snowblower Improving Snowblower performance
- Thread starter MarcusCarr
- Start date
- Views: 23825
ericher69
Veteran Member
Where did you buy the sheeting?
Plastic Tanks, Plastic Buckets, Plastic Bottles, Labware, PVC Pipe - United States Plastic Corporation ® has a large variety of raw plastic sheeting, bars, etc.
fish6942
Gold Member
Marcus,
Is your garage heated? If so, I wonder if the warm metal contributes to the issue of snow/slush sticking to the insides of the blower.
Also, I believe the 5/8" of clearance between the fan and housing is excessive. My Farm King (Buhler) starts at about 1/2" at the 12 o'clock position and tapers down to about 1/4" as it approaches the chute at about the 9 o'clock position.
Is your garage heated? If so, I wonder if the warm metal contributes to the issue of snow/slush sticking to the insides of the blower.
Also, I believe the 5/8" of clearance between the fan and housing is excessive. My Farm King (Buhler) starts at about 1/2" at the 12 o'clock position and tapers down to about 1/4" as it approaches the chute at about the 9 o'clock position.
Here are some similar links:
Snowblower
Woods SS74 snowblower bad performance
