Input for a multi process welder.

   / Input for a multi process welder. #21  
You can Tig weld aluminum with a DC only welder. You'll need a bottle of helium. It does run hot. About half the amps as with AC. This weld was done on DCEN, with 100% helium.

Good to know .... something to try .... thanks!
 
   / Input for a multi process welder. #22  
You can Tig weld aluminum with a DC only welder. You'll need a bottle of helium. It does run hot. About half the amps as with AC. This weld was done on DCEN, with 100% helium.

Warning for newbies: don't try this unless you have 30 years welding experience.:D
 
   / Input for a multi process welder. #23  
Warning for newbies: don't try this unless you have 30 years welding experience.:D
I did it, and I've only been welding a few weeks now.;)
Even did it with an Everlast stick welder, and a Tig rig.
 

Attachments

  • Tig DCEN 1.JPG
    Tig DCEN 1.JPG
    227 KB · Views: 159
   / Input for a multi process welder. #24  
   / Input for a multi process welder. #25  
I never had much luck Tig welding aluminum on DCEP. :eek::shocked:
 

Attachments

  • DCEP H.jpg
    DCEP H.jpg
    64.2 KB · Views: 155
   / Input for a multi process welder. #26  
Shield Arc if there was a plan to weld two feathers together from a Turkey to an Eagle you'd find a way!
 
   / Input for a multi process welder. #28  
You give me waaaaaaaay too much credit! I'm just a beginner.;)

He's just a beginner liar....and just in case newbies are following this thread, ShieldArc is a master welder with decades of experience. Don't try things that he fools around with unless you are really sure you know what you're doing. He knows when his experiments fail, you (newbie) might not recognize the difference between a fully penetrated good weld and glue gun weld.

(No disrespect ShieldArc, just wanted to make sure noobs don't go running out to the welding shop in search of Argon so they can do welding repairs on their mother's car...)
 
   / Input for a multi process welder. #29  
He's just a beginner liar....and just in case newbies are following this thread, ShieldArc is a master welder with decades of experience. Don't try things that he fools around with unless you are really sure you know what you're doing. He knows when his experiments fail, you (newbie) might not recognize the difference between a fully penetrated good weld and glue gun weld.

(No disrespect ShieldArc, just wanted to make sure noobs don't go running out to the welding shop in search of Argon so they can do welding repairs on their mother's car...)

Nope. Save that for your mother-in-law's car.
 

Tractor & Equipment Auctions

2015 Ram 1500 Crew Cab Pickup Truck (A49461)
2015 Ram 1500 Crew...
2015 FORD F-250XL SUPER DUTY TRUCK (A51406)
2015 FORD F-250XL...
48in Forks Loader Attachment (A49346)
48in Forks Loader...
2018 JLG 1644 4x4 15,600lb High-Capacity Rough Terrain Telehandler (A49461)
2018 JLG 1644 4x4...
2018 KENWORTH T680 TANDEM AXLE SLEEPER (A51222)
2018 KENWORTH T680...
Non running toro mower (A48082)
Non running toro...
 
Top