Birdhunter1
Veteran Member
You give me waaaaaaaay too much credit! I'm just a beginner.
Yeah, yeah....
I know you on another forum where you claim your just a hobbyist.
Input for a multi process welder.
- Thread starter dickfoster
- Start date
- Views: 16197
Yeah, yeah....
I know you on another forum where you claim your just a hobbyist.
Shield Arc
Super Member
Well I' am! I haven't earned a pay check in years.
mikefromnh
Gold Member
- Joined
- Mar 7, 2009
- Messages
- 465
Well I'm a newbie welder that just ordered some aluminum stick rods to fix this wheelchair ramp.
Almost every weld underneath is cracked and it's getting kind of spongey to walk on. For $15 it's worth a try to fix.
If it works I think I'll run a 110v extension cord out to the barn and build myself that aluminum utility trailer I always wanted
Almost every weld underneath is cracked and it's getting kind of spongey to walk on. For $15 it's worth a try to fix.
If it works I think I'll run a 110v extension cord out to the barn and build myself that aluminum utility trailer I always wanted
OP
dickfoster
Elite Member
Well I'm a newbie welder that just ordered some aluminum stick rods to fix this wheelchair ramp.
Almost every weld underneath is cracked and it's getting kind of spongey to walk on. For $15 it's worth a try to fix.
View attachment 461105View attachment 461106View attachment 461107
If it works I think I'll run a 110v extension cord out to the barn and build myself that aluminum utility trailer I always wanted
Hummmm welder with an extension cord? Sounds kinda dicey to me unless it's a very heavy duty/heavy gauge extension cord and it's not that far out to the barn.
Shield Arc
Super Member
mikefromnh
Gold Member
- Joined
- Mar 7, 2009
- Messages
- 465
A new ramp is $175. Not sure it's worth paying to have fixed. I was going to just get a new and use this one as a backup. But figured why not try... Doesn't need to be pretty, just needs to keep those cross pieces from falling out so there is as much flex when you step on it, JB weld would probably work.
mikefromnh
Gold Member
- Joined
- Mar 7, 2009
- Messages
- 465
I never noticed them there. I've bought these online. They have lots of selection. Some more money some less.
These particular ones have an extra piece at the bottom of the ramp for a nice smooth transition that some of the cargo ramps don't have.
EZ-Access 2-Piece Suitcase Single Fold Wheelchair Ramps | DiscountRamps.com
These particular ones have an extra piece at the bottom of the ramp for a nice smooth transition that some of the cargo ramps don't have.
EZ-Access 2-Piece Suitcase Single Fold Wheelchair Ramps | DiscountRamps.com
sd455dan
Elite Member
- Joined
- Oct 23, 2012
- Messages
- 4,762
- Location
- North Idaho
- Tractor
- Rhino 554, Ford 550 TLB (JD X500, MTD, Gilson riding mowers) Ford 3000-Sold
Well I'm a newbie welder that just ordered some aluminum stick rods to fix this wheelchair ramp.
Almost every weld underneath is cracked and it's getting kind of spongey to walk on. For $15 it's worth a try to fix.
View attachment 461105View attachment 461106View attachment 461107
If it works I think I'll run a 110v extension cord out to the barn and build myself that aluminum utility trailer I always wanted
110 VAC and an extension cord to weld what appears to be decent gauge aluminum... may end up being a little short on power.
i am really new to Aluminum welding myself- and just welded a broken scoop shovel (.070) back together using tig and with the foot pedal was running as high as 170 amp ac to get the puddle flowing good.
guess it may take less amps to DC stick weld Aluminum, - hope it works and please post the results, i bought some of the Aluminum stick rod, but haven't really tried it yet, would be interested to see how well it works